Energy meters Dealers in Andheri, Mumbai

Three-phase four-wire multi-function electronic meter is a fully programmable and very powerful meter that can satisfy your most demanding request. It can provide you with extra function of reactive energy measurement, instant variable of current and voltage for each phase and load profile. The accuracy for active energy measurement can be 0.5s. Its reliable performance under heave load and high harmonic conditions make it a superb choice for the gate of power station or large power consumer. It complies with IEC 62053-11. 

• Feature: Weight: 150 g Calibration: Factory calibrated to Indian standards, valid for 1 year Dimensions (in mm): 125 × 75 × 29 (L × B × H) Reset: Causes the display to set zero Etc
• BENEFITS: High sensitivity High resolution Easy to use Portable construction Etc.

The Valstat® V 300 is very sensitive; its resolution is 1 volt at the standard measurement distance of 2" (about 5 cm). The meter is designed to effectively measure the magnitude and polarity of the surface voltage with greater clarity and speed than what has been possible before. The V 300 is ideal for measuring electrostatic charges in plastic, paper, packaging, textile, food, pharmaceutical, electronic, and other industries.

Measure, Monitor and Control Multi function, Dual Source, Over Voltage Current, cut off for Protection. Benefits Direct revenue interface between service provider and the consumers - Single Solution for Electricity, Gas and Water.

This panel meter is designed for dual source energy measurement. It serves as a replacement for two separate energy meters, necessary for metering applications with dual energy sources. Features :- Class 1 accuracy ACDC auxiliary supply RS 485 communication Password protected CTPT value programming.

The dc Energy Meter provided By Us is Used for Measuring Electrical Energy Consumed By Multiple Loads that are Connected to D.c. Voltage Source. Furthermore, the Dc Energy Meter is Ideal for Measuring the Drop of Voltage Across Current Shunt, Input Voltage and Observing Current, Voltage, Kw & Kwh with the Usage of Push Button Switches. features 7 Digit Lcd Display of Kwhuser Selectable Shunt Ratingreset of Kwh for Every Channel Protected By Passwordindividual Channel Can Be Enabled or Disabledshunt Can Be Placed Either in +ve or -ve Side of the Dc Power Sourceenergy Values & Settings Retained After Power Failureremote Monitoring of Parametersdisplay of Dc Current, Voltage, Power (kw) & Kwhr for 7 Channelssoft Calibration – No Trimpotsoptional Real Time Clockoperates from Battery Being Monitored (optionally It Can Be Operated from a Different Auxiliary Power Supply)optional- Rs 485 Modbus Link for Pc Connectivitydata On Modbus Protocol Can Be in “integer” Format or Ieee 754user Friendly Lcd Display Messages technical Specifications electrical input Voltage : nominal Voltage Range12v (10 to 19v), 24v (20 to 38v)48v (40 to 76v), 96v (80 to 152v)110v (90 To175v), 220v (180 to 350v)input Current : nominal Shunt Value 75mv (50 to 100)operating Range 5mv to 100mvauxiliary Supply : same as Input Voltage or Optionally Any Voltage Noted in the Voltage Range Abovemeasurement : 7 Channel Dc Kwhraccuracy : +/- 1% (10 % to 120 % of Range)resolution : 0.1 Kwhrindication display : 16 X 2 Character Backlit Lcd Character Size 2.95 X 4.35mmdisplay Parameter (four Channels)kwhr -xxxxxx.xcurrent- Xxx.xpower ( Kw) -xx.xvoltage -xx.xconfigurable Parametersshunt Rating- 75 Mv = 10 to 1000 Ampbaud Rate -9600 to 19200device/ Unit Address -01 to 255calibration for Each Channel and Reset of Energy Count Provided with Password Protectionprotection : Reverse Input Polarity Protectionisolation between Aux-supply and Electronics: 500 V Dc for 1minbetween Current (shunt) and Input Dc Potential: 500 V C for 1 Mincommunication rs 485 2 Wire Communicationprotocol Modbus Rtu Integer, or Ieee 754baud Rate : Settable Either 9600 or 19200address : Settable 01 to 255data Retention: Energy Values and Settings Retained After Power Failurecalibration: Soft Calibration Through Softwarereal Time Clock (rtc) : Optionalpower Consumption : < 2 Wattsecurity password for Editing of Settingspassword for Calibrationenvironmental normal Operating Conditions. Temperature: Operating Temperature: 10 C to 55 C relative Humidity: 55% to 85%.dimensions housing : Plastic or Metal Housing 96 X 96 X 65 Mm (cut Out 92 X 92 Mm)

• Dimensions: 327 H x 167 B x 104 D mm

L&T’s high accuracy availability based tariff (ABT) meters provide a flexible solution for energy monitoring and billing bulk inter utility power flows. Class 0.2s accuracy, 3 Phase 4 Wire, Conforms to IEC and IS standards, 15 minute block average for frequency and energy, Frequency coding for billing, Separate reactive energy registers linked to supply voltage, Midnight storage of energies, Load Survey, Optical portRS 485 communication (optional)

Large residential, retail and office buildings are the face of economic growth and development today and house a large segment of the urban population. Such setups require huge air-conditioning and ventilation systems that are run by centralized cooling plants. The cooling energy is a centralized resource but is generally shared by a number of occupants in the building. It is understood that they have diverse patterns of usageand so it becomes important to monitor and measure cooling energy with the help of fool proof BTU metering and automated meter reading systems. By providing these we facilitatedevelopers to measure & bill occupants accurately as per their individual energy usage and to recover the costs of generating and distributing the same in a fair manner to all parties involved.

In today's world of cutthroat competition and market dive economy, on one hand there are rising energy cost and on the other is an urgent need to be "globally competitive", not only to grow but even to survive. Further there is need to comply with the new energy conservation law 2001, making energy audits mandatory. Smart analyser (multi parameter meter software) idealsoft solutions brings to you yet another tool smart analyser, to enhance your energy conservation and utility management efforts.

• Type: Multifunction Meter
• Certification: ISO 9001:2008
• Weight: 200-300gm
• Voltage: 3-6VDC, 6-9VDC
• Application: Energy Monitoring
• Display Type: Digital
• Frequency: 50Hz-65Hz
• Automatic Grade: Automatic
• Power Source: Electric
• Feature: Accuracy
• Warranty: 1Year

digital energy meters, Relay Test Bench

Energy Monitoring System, Energy Saving Transformer for Lighting

Tariff Meter, clear pvc bags, Pvc Bags, Pvc bags manufacturer

Energy Meter, analogue meters, Digital Ammeter, Voltmeter, Frequency Meter

Energy Meters, Electronic Components, Electronic Products

Sigma Weld 3 Phase Energy Meter, Annealing Furnaces

Static Watthour Meter, Analogue Panel Voltmeters, Dc Energy Meter

Digital Phase Angle Meter, Digital Watt Hour Meters, digital preset timer

multi function meters, Digital Panel Meters, Current Transformers