Energy Regulator Dealers in Mumbai

• Voltage: 120 V
• Brand Name: Simmerstat
• Single Circuit: right
• Shaft diameter: 6 X 4.6mm
• Shaft length: 23 mm

• SENSOR: Without Sensor
• SETTING: Knob manually
• DISPLAY: LED light ON/OFF

  Features:   Compact size 90mmx90mm   LED light mode   Range 0 to 100 sec.   High indication accuracy : +/- 0.25%   Power supply - 230 VAC

• Color: Black
• Material: Plastic
• Power: 20 W
• Brand: Khabardar
• Current: 15 Amp
• Frequency: 50 Hz
• Operating Voltage: 230V AC

The SME Energy Regulator effects its control by periodically switching the power on and off, the ratio of the on time to the total time determining the average power input.As compared with a variable resistance, the energy regulator is in general cheaper, far less bulky, and applicable to any load up to its rated capacity. Moreover, the control is effected without the loss of energy associated with resistance control, is variable continuously from no load to full load and is substantially independent of mains voltage fluctuations up to about 20%. The energy regulator mainly consists of a heated bimetal and a snap-action switch (spring contact). Fig. 1 below will make the mode of operation clear. Is a bimetal strip holder carrying a cam follower whose function is to compensate for variations of ambient temperature Is a bimetal strip carrying a heater winding Is a snap-action switch operating the contact Is a knife edge about which the bimetal assembly can pivot Is a means of adjustment Normally the contact D is closed so that current flows through the heater winding on the bimetal and through the load. The bimetal warms and, in bending, opens the switch C, interrupting the current both to the heater winding and to the load. The bimetal then cools and the cycle is repeated. The ratio of the time during which the contacts are made, to the total time of the cycle, determines the average input. This ratio is controlled by the adjusting cam F. Clearly if the cam is set so that the contacts remain closed with the maximum deflection of the bimetal, the power will be permanently on; if the cam is turned until the contact D is open with the bimetal cold, the power will be permanently off. Between these two limits the input is continuously adjustable. Since the same voltage is applied to the energy regulator as is applied to the load, any variation will affect the two similarly, so that the average input is independent of applied voltage over a wide range. Features Long duty cycle and short intervals between heating = greater average output, e.g. for heating up Short duty cycle and long intervals between heating = smaller average output, e.g. for simmering The output of the load can be set to between 6% to 85% of the rated output. Select highest setting for full nominal rating (100%). Infinitely variable control of the power supply

• Type: Energy Regulator
• Material: Aluminium, Brass, Fiberglass, Frp, Glass, Plastic, Porcelain, Resin
• Application: Energy Use
• Color: Creamy, Golden, Metallic, Off White, Shiny Silver, Silver, White
• Condition: New, Old
• Automatic Grade: Manual, Semi Automatic
• Feature: Accurate Reading, High Performance, Lightweight Specifications, Longer Service Life, Robust Construction, Rust Proof, Shocked Proof

energy regulator, thermocouple connectors, S Capillary Thermostat

energy regulators, Fence Pole, Thermostat

energy regulator, stem thermostat, Temperature controlling Components

energy saving fan regulators, ac power saver, led solar study lamps

energy regulators, Halogen Fitting 500 / 1000 V, Bottle Fuse, Wire Puller

energy regulator, K Type Compensating Cable, Thermocouple Compensating Wire

energy regulator, Pulse Counters

energy regulator, Mica Strip Heater, capillary thermostats