Environmental Sensors Dealers in Andheri, Mumbai

• Accuracy: 4%
• Type: SCT Series Humidity and Temperature Wall Mount Transducers With LCD Display
• Color: Silver
• Accuracy: 0.3°C
• Usage: Sensing Temp & RH
• Voltage: 24V
• Output Type: 4 mA to 20 mA
• Model: SCTHWA43SDS
• Usage/Application: Pharma
• Brand: Honeywell
• Humidity Accuracy: 4 %RH
• Temperature Accuracy: 0.3 DegreeC
• Temperature Range: -5 DegreeC to 55 DegreeC
• Cover Trim Color: Silver
• Housing material: Plastic (PC+ABS)
• Sealing: IP30
• RH range: 0-100%
• RH Output: 4-20mA
• Temp Range: -5°C to 55°C Temp
• Power Supply: 24VDC

We offer carbon dioxide gas sensor.

• Usage: Industrial
• Gas type: Combustible gases.

The ULTIMA MOS-5E Hydrogen Sulphide Addressable Transmitter is a highly reliable, self contained, micro processor-controlled single point monitor with integral 3 digit readout. It is designed to measure and display concentrations of H2S in three ranges: 0-20 ppm, 0-50 ppm or 0-100 ppm, but will continue to display concentrations up to 120 % FSD. The sensing element may be incorporated in the transmitter housing or remotely mounted at distances in excess of 600 m. The ULTIMA MOS-5E user interface is menu driven. In addition the instrument may be addressed via the Dual ModBus RTU interface which is based on the RS-485 standard. The ModBus output provides status, alarm, fault and other information for operation, trouble-shooting or configuration of the unit. HighlightsPart NumbersApprovals   RS-485 Dual ModBus Serial Interface in addition to 4-20 mA provides measurement, set-up and status of up to 247 nodes 18.5-35 VDC operation allows longer cable runs and lower cost installation User changeable H2S range enables convenient, flexible operation 3 digit display shows over-scale readings and alarm status Single-point calibration provides easy, fast and simple one-man calibration Fully adjustable and configurable open collector outputs result in lower wiring cost and flexible operation

The Temperature & Humidity Sensor, which we offer, is sourced from the most reliable and experienced vendors in the market. This Temperature & Humidity Sensor are known for exhibiting effortless performance. These Temperature & Humidity Sensors are used in diverse industries, and have to pass through stringent quality checks before delivering to the clients.

Maintaining the dew point of your air or gas system will prolong the lifetime of your equipment. Permanent monitoring enables you to detect and prevent problems on time. VPInstruments' dew point transmitters are designed for ease of use, incorporating all the features needed to make installation and operation as simple as possible. The calibrated transmitters can be instantly incorporated into VPVision, or they can be connected to your air or gas management and control system. PRODUCT DESCRIPTION VPInstruments’ dew point transmitters are designed for ease of use, incorporating all the features needed to make installation and operation as simple as possible. The calibrated transmitters can be instantly incorporated into VPVision or they can be connected to your air or gas management and control system. Maintaining the dew point of your air or gas system will prolong the life of your equipment. Permanent monitoring enables you to detect and prevent problems in time. FEATURES AND BENEFITS 2-wire loop powered connection Dew point or ppm moisture content IP66 (NEMA 4X) Excellent sensor protection Fast response time APPLICATION Extreme dry air

Advanced Materials—improved high temperature mechanical strength and oxidation resistance ensures increased RELIABILITY & provides LONGER LIFE 100% Hermetic—no insulation resistance failures, better accuracy, and provides longer life Type K Terminal Contacts—reduces secondary junction errors Different Sized Terminal Studs—makes it impossible to cross-wire

• Material: Plastic
• Application: Automobile Use, Industrial Use
• Color: Black, Blue, Red, White
• Condition: New, Used
• Power: 15w, 20w, 25w
• Warranty: 1year, 2years, 5years
• Alarm Range: 1.5mtr, 1mtr, 2.5mtr, 2mtr

The MOISTURE SENSOR is of solid Polymer structure and is, Fast, Accurate and Reliable Water in Oil and Temperature Transducer’s designed for Industrial, Transformers and Locomotive applications where a reliable and accurate measurement of water in oil content is highly required. Its fast response time combined with Reliable and Rugged structure make it even suitable for fixed in situ mounting in fluids under Pressure Dissolved water in oil is a critical data for Oil System Management as water consumes oil additives that can result in severe mechanical damages due to degradation of Lubricant Properties. In a comprehensive Transformer Maintenance Program, determination of the Moisture content and Temperature of the oils is an essential part. Excessive moisture contents causes accelerated ageing of the Insulation Materials and reduce their Dielectric strength. In extreme cases this can result in Arcing and Short Circuits within the windings. Accurate moisture analysis can also warn about Leaks in the Oil System as water is absorbed from the surrounding air. AMM-160 is a Portable Moisture & Temperature in oil meter or a sensor that provides an excellent reliable, economical and Time saving solution for measurement of moisture in Oil in the field. It measures Moisture-in-oil in terms of the Water Activity (aw) and Temperature. The same gets converted into PPM units as in Transformer applications, PPM-unit is traditionally used.

ORP Triode Electrode, Electronic Multichannel Pipette

The model IRD7111 is designed for continuous measurement of environmental noise in industrial and urban applications. It is suitable to meet Occupational Health Regulations that requires precise sound level monitoring. It continuously transmits signals to a Central Control Room givingwarning and alarm of excessive noise that could be a health hazard to personnel in the area. The IRD7111 is microprocessor based and programmable for a range of sound pressure levels. In addition to its 4-20mA output and relays, IRD7111 has a BNC socket for FFT analysis of the raw time wave form signal for identification of any specific sound frequencies that may be harmful. IRD7111 is part of IRD Mechanalysis Ltd’s comprehensive IRD7000 suite of proven site mounted machinery vibration and TSI transmitters The IRD7111 is designed to be mounted above process machinery offering a 90 degree sound cone radius below. The base mounted integral microphone is protected from dust and moisture ingress for long life. Once programmed, the hinged door is screwed sealed closed as the enclosure is IP65rated. Standard instrumentation 4­-20mA signal data can be transmitted to a Central Control Room or DCS for trending, recording or for local display. Internal relays are provided foraudible annunciation or visual alarms. Prior to installation a sound survey would be undertaken to establish an optimum location for IRD7111. Based on machine distance from the microphone the appropriate db warning and alarm levels can be set. The IRD7111 is also provided with ‘FAST’ option to select Peak Measurement, if required. The transmitter’s output current is 4mA DC (when the input sound signal corresponds to the base threshold) and 20mA DC (when input sound level corresponds to full scale) with an accuracy of ± 2dB of full scale range.

Zirconia Oxygen Analysers for Online Oxygen Measurement in Stack Gas.Based on Zirconia Measuring Principle.Zirconia Oxygen Analysers for Online Oxygen Measurement in Stack Gas.Oxygen Analyzer Sensor

We frequently keep a check on the storage space to ensure that it is well-maintained by the experts. We have installed the latest machines and leading technologies to save products from spoiling. Now purchase ORP Sensors & Electrodes at highly affordable prices from us. We are its well-known supplier in the country.

Air Particle Sensor, RS-232C / RS-422A Adapter, Terminal Relay G6D-F4B

Humidity Sensors, Sensors, level sensors

Weather sensor, Led Parking Sensor, yarn sensor, Pir Motion Sensor