EOT Crane Dealers in Mumbai

Eot crane tailormade as per site requirement & diamensions. Negligible maintainence,robust design.can also undertake amc , eot crane revamping,and ready available spares at all times.

• Brand Name: FAFECO
• Certification: As per customer requirement.
• Application: Material Handling
• Feature: As per customer requirement.
• Condition: New
• After-Sales Service Provided: Worldwide
• Max. Lifting Height: As per customer requirement.
• Place of Origin: Mumbai, India

Custom designed world class cranes manufactured to any international specification standards & inspection. Many cranes exported to major international giants.

The goliath crane move on rails supported on floor level instead of rails placed at elevated level as in case of EOT Cranes. This eliminates the need for workshop building and hence reduction in capital cost. Goliath crane find major application in outdoors. However, the goliath cranes can also be installed inside a closed building. Special protection is provided for outdoor duty cranes depending on application and agreement with buyer. These special features may include – corrosion allowance in design of main load bearing structural members, drilled holes on walkway to avoid accumulation of rain water, localized full cover for trolley, covers for Long travel motor/ brake, additional parking brake for Long travel motion, special paint etc

• Color: Yellow
• Material: Mild Steel
• Lift: UPTO 20 METRE
• Phase: Three Phase
• Usage/Application: Plants,Warehouses
• Crane Control: PENDENT/ CABIN
• Drive System: ELECTRICAL WITH VFD
• Automation Grade: Automatic
• Hoist Travelling Speed: 5-10 m/min
• Hoisting Speed: 4MPM
• Voltage: 440VOLT
• Lifting Speed: 3.5MPM TO 6 MPM
• Max. Lifting Height: 20 metre
• Height: 15000MM

• Brand Name: MECH CRANES
• Condition: New
• Application: STEEL ROLLING MILL ETC
• After-Sales Service Provided: Yes Any Where In The World
• Max. Lifting Height: 30 Mtrs

Double girder cranes mech manufactures double girder overhead cranes in swls ranging from 1mt to more than 200mt. These cranes can either incorporate standard crabs up to a swl of 100mt or fully customized open winch type crabs. Mech can supply fully customised double girder cranes as your requirements for different duty cycles and a diverse range of applications. Double girder cranes can be offered for a very large range of spans, heights of lift as well as customizable speeds depending on your application. They can also be provided with multiple hoisting trolleys running on the same bridge or auxiliary hoisting mechanisms on the main trolley. precise control of all motions is achieved through variable frequency drives. We also offer double girder overhead cranes for the steel industry, built according to is 4137 norms. These cranes are built to be capable of withstanding extreme requirements of operating speeds and operating conditions.

We manufacture, export, and supply optimum quality Goliath Crane. The Goliath Crane offered by us, is an ideal material handling equipment for various industries and projects. Our Goliath Cranes are mainly employed to work in open area like road sides, shipping yards, construction industry and many other applications. Goliath Crane Specifications SWL 2T/3T/5T/10TAs per party requirementsAs per party requirements Demanded In HangersFactoriesPower stationsLarge water worksRailway yardsHarborsWater housesTransportersMinesQuarriesHeavy fabrication unitContracting firms Applications Loading and unloading trucksHeavy pipe lying in trenchesErection of bulky equipmentShifting of heavy load

We support with  comprehensive range of heavy duty EOT crane systems and related accessories for various applications in power, nuclear, shipbuilding, steel plant, heavy/general engineering sectors etc. We also support with customized solutions after doing an in-depth analysis of your applications, production facility, factory, and material handling requirements.

We offer spare of eot crane. We have a wide collection of all the spares of eot cranes. The spares are made up of superior quality material.

Owing to the years of industrial experience, we have been able to serve our valued clients a broad range of Double Girder EOT Crane that can be customized in different specifications. Having a wide need in the automobile and engineering industry, these EOT cranes are well acknowledged for their robust design, outstanding performance and premium quality. Further, these EOT cranes are available in several capacities, size and other allied specifications. Features: Application specific design Maintenance free High efficiency

Our range of EOT cranes are engineered and made using finest quality components and raw materials such as I beams, MS angles, MS sheets Motors, brakes. We at VHS manufacture EOT Cranes as per clients demand and requirement whether single girder or double girder. Salient Features : High performance Low maintenance Sturdy design Durable quality

Single and Double Girder Goliath Cranes mostly used for outdoor applications in Open/Storage yards, installing these types of cranes benefits the client by saving the shed construction cost. Where the shed is not designed to withstand the overhead crane loading, goliath crane can be the best option for indoor application also. Standard capacity ranges from 1ton to 300ton depending upon customer requirements. Preferred class of duty II, III & IV as per IS:3177(1999)/807.

Jayco electric overhead travelling cranes are available in single double girder for safe, efficient lifting & shifting of heavy material load in factories, workshops, warehouse etc. they offer easy access in all the six directions –long travel, cross travel & updown movement. Cranes are designed & manufactured in accordance with is:3177, is:4137 & is:807.

We offer Double Grider Eot Cranes. ‘ELMECH’ E.O.T Cranes are manufactured keeping in mind the following basic objectives. High quality : Minimum maintenance : Aesthetic Appearance. The above objective is achieved incorporating certain advanced technical feature described in the following pages. ELMECH cranes are designed keeping in mind Indian Standard Specification applicable to the crane, viz. IS:807-2006 Code of practice for design manufacture, erection and testing (structural position) of cranes and hoists. IS: 3177-1999. Code of practice for design of overhead travelling cranes and gantry cranes other than steel mill cranes. IS: 4137-1985. Code of practice of design of steel mill duty cranes. ELMECH double girder cranes are classified as class I, II, III & IV. These cranes are available in capacities ranging from 1 ton to 100 tons. STRUCTURAL ASSEMBLY: This basically comprises of two bridges girder fixed on two end carriages carried on forged steel wheels. In case of gantry cranes the two bridge girders are fixed on top of four gantry legs which in turn are carried on two under carriage provided with forged steel wheels. The bridge girders are fabricated from high quality steel plates forming a rectangular box section. Stiffening diaphragms are filled at regular intervals for the design to confirm to IS-807 and IS-800. The girders are so built that they have the required camber in the unloaded as required under Indian standard specifications.

We offer a gamut of Double Girder E.O.T. Cranes. Using stamped and certified raw material, we manufacture electrically overhead traveling cranes that adhere to various specifications of IS:3177 and IS:4137. Our range of double girder type EOT cranes is absolutely safe to use, can resist heavy loads and has simple operations. Various components of these cranes are fabricated as per IS:807. Features:  The structural built of these cranes are in conformation with ISO 4301  Safex cranes have minimum maintenance and emergency interlude  Limit-switches are easily adjustable  Load tested to 125% and certified by us after performing on these in our own workshops Specifications::  Safe Working Load: 500 kgs. to 2,00,000 kgs.  Span: 5 mtrs to 75 mtrs  Height of Lift: As per customer specifications  Class of Duty / Standards: Equivalent to M3,M5, M7, M8 as per IS 3177 / IS 807  Speeds: Selected depending on client specifications / applications / shed dimensions  Crane Control: From floor through pendant push buttons, optionally through radio remote control / cabin with master control  Drive System: Twin drive through squirrel cage induction geared motors with built-in fail safe brakes  Motors: Squirrel cage induction hoisting motors with built-in fail safe brakes for hoisting, cross travel as well as long travel. Insulation class for all types of motors B/F  Brakes: Built-in Brakes for hoisting, cross travel and long travel motions  Power Supply System: To hoist and cross travel through trailing cables / drag chain to crane through shrouded bus bars / trailing cable / MS angle iron conductors / bare copper conductors (depending on customer's choice and application)

We are well known manufacturers of Eot Cranes used for handling heavy loads. These cranes find their applications in numerous industries as they are capable to withstand heavy loads.

• Brand Name: Sharp Engineering
• Application: Industrial
• Country of Origin: Made in India
• Material: Alloy Steel
• Voltage: 230 V
• Frequency: 50 Hz
• Phase: Single
• Power Source: Electric

• Features: Durable,Climate resistance,Intricately designed,Robust construction,Premium quality

We are leading supplier of huge range of EOT Cranes.

• Type: Single Girder
• Application: Construction, Industrial
• Power Source: Electric
• Capacity: 5-10 ton
• Max Height: 20-40 feet
• Span: 1-10 m

The features of our Single Girder EOT Cranes are inclusive of less power consumption, reduced vibration, low noise, and longer functional life to name a few. We procure the Single Girder EOT Cranes from the trustworthy manufacturers who design them as per the laid international quality norms. Our Cranes are offered at the most discounted prices. We are a top-notch Exporter and Supplier of Single Girder EOT Cranes from Maharashtra, India.

• DESIGNED / MANUFACTURED AS PER IS:3177 & IS:807: LIGHT /MEDIUM / HEAVY DUTY.
• PUSH BUTTON PENDENT OPERATED.: AMBIENT TEMPERATURE UP TO 60 DEGREES.
• CABIN / PENDENT OPERATED.: LOW DEAD WEIGHT AND HEAD ROOM

We are offering eot cranes. Light / medium / heavy duty e.o.t cranes.