Epoxy Coatings Dealers in Ghatkopar, Mumbai

• Shelf Life: 12 Months from Date of Manufacture in Sealed Condition.
• Packaging: 400 Ml Aerosol Spray

MoS2 and solid lubricants based air-drying anti friction coatingBenefits\n\nExtremely wide service temperature range of -180°C to +450°C\nLow coefficient of friction, high surface load and pressure withstanding capacity\nHigh and low temperature performance\nProtects surfaces from wear, galling and seizure\nOil, grease and solvent resistant\nPrevents stick-slip and fretting corrosion\nProvides clean dry film lubrication and does not accumulate dirt or abrasives\nOffers surface protection from corrosion\nLubricates under adverse operating environments such as in vacuum or near radiation\nProvides maintenance free permanent lubrication where oil or grease contamination cannot be tolerated\nExcellent lubricity and highly abrasion resistant\nIncreases service life of equipment\n\n \nApplications\n\nAs a dry film lubricant for components exposed to abrasive or dusty environments as threaded connections, pins, levers, pivots, splines, bolts, chains.\nAs a metal pretreatment lubricant prior to assembly for effective running in to reduce wear, friction and eliminate metal to metal contact and seizure.\nAs a lubricant for components exposed to critical environmental conditions as vacuums, radiation, high temperatures, humidity.\nAs a heavy duty, high temperature thread compound to prevent seizure and corrosion and facilitate easy assembly and non-destructive disassembly.\nAs an anti friction coating for metal cutting tools as millers, reamers, taps, drills, gear cutters, punches, dies to prevent sticking, binding and metal build up; increase life of tools, production quality and efficiency.\nAs an extreme pressure lubricant for heavily loaded or stressed surfaces to prevent wear, friction, galling, scuffing, seizure and fretting as for press fits, pins, levers, pivots, bearings, gears, splines, journals, linkages.\n\nDirections for Use Shake the can vigorously for a couple of minutes before spraying till the bearing noise from inside the container is audible. Repeat before every application. Spray onto a clean, dry and degreased surface. Only a thin film of this lubricant is required. Allow solvents to evaporate. Spray from a distance of 20-30 cms. Repeat if necessary. Excess lubricant may fall off during assembly. For cleaning the valve dip-tube after spraying, invert the can and depress the actuator button for a few short bursts till only the clear propellant comes out.Caution:- Contains flammable solvents and propellant. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.

• Solid: 45 ± 2
• Flash point: At or Above 30 °C.

WOODPOL wood finish is a Single Pack, air-drying Polyurethane system for wood & wood substrate. This clear coating system brings out the grain Pattern & surface texture of wood so well to make it look splendidly natural & show out real charm. Not only it preserves & enhance the natural beauty of wood grain, but also protects from heat, water, tea & coffee stains & insect attack. Select finish available in Clear Matt, Glossy or in transparent shades like Oak Yellow, Rose wood, Walnut & Red Brown. Apply one or two coats of WOODPOL TRANS WOOD PU wood finish and allow to dry for minimum of 6 - 8 hours. Light sand with emery paper #320 between application of successive coats.

An iron based chromium-carbide alloy producing a hard, well bonded coating, that is abrasive and corrosion resistance and can be easily machined with carbide tools, yielding a smooth, low coefficient of friction surface finish, suitable for a number of applications such as, Boiler Tubes & Tube Shields, Fan Blades, Food Processing, Paper Processing

WOODPOL MELAMINISED is a premium quality acid cured opaque coating which offers lasting and durable finish to wood & wood substrate (like plywood, particle board, MDF etc.) with excellent water, scratch, chemical, hot beverages, stains & termite resistant properties. Being both cosmetically & functionally superior, it maintains excellent quality and uniqueness of wood for years. An innovative & futuristic product from coatings & coatings which is simple in concept. You can make wide spectrum of breath taking shades by mixing Woodpol Melaminised Pigmented shades in glossy or matt white & bring your wood to life in your favorite shades. You may also use these shades directly.WOODPOL is specially formulated which consist of a unique combination of protectants & special additives which imparts superior properties such as elegant silky finish, which is tough, durable and stain resistant. All these makes the premium WOODPOL a rich finish with high durability to the interiors

• Packaging Type: Box
• Form: Powder
• Categories: Regular Solid Colors
• Surface Finish: Glossy
• Type: Thermoset

• Material: Silicone
• Condition: New
• Country of Origin: India

Deals in Silicone Mould Release agents for Rotational Moulding, Epoxy 1)  Metroark R 101 Release Coating 2)  Metroark Siicone 17 Compound    

Powder Coating, sheet metal stamping, tooling dies, fabrication component

• Brand Name: Tuf-Kote
• Color: Color
• State/Form: Aerosol
• Size: 100 ml & 500 ml aerosol

Perma Master Coat Clear HD is a high build, heavy duty industrial coating based on epoxy resin and hardener. Perma Master Coat Clear HD is especially developed to take the loads that are expected on the floors and walls, metal and concrete structures of a factory. The product is supplied as two-pack system comprising of base and hardener. It requires only onsite mixing Jo produce an easily applied chemical resistant finish. Perma Master Coat Clear HD coating can easily be built up to higher thickness by subsequent coats. We manufacture, export and supply the qualitative range of Perma Master Coat Clear HD. Advanteges : Durable Solvenfrtee Non-toxic Highbuildcoating Waterproof ChemicraelsistantEasilyappliedbybrushorroller

We specialize in Exporting and Trading Sublimation Coatings, for our clients. The sublimation Coating specializes in solving the problem of the traditional heat transfer, which can only transfer heat on chinlon / polyamide and polyester. The Sublimation Coating for ceramic can be used on ceramic, glass, aluminum products, plastic products, metal, wood, metal sheets, etc. Applications Man-made fabricNatural fabricNon-woven fabric goods

We are among the eminent names of the industry that involve in manufacturing, exporting and supplying Self Lubricating Coating. Massively applied on shafts, vessels, tank rollers and rods, these coatings are highly used due to the prevention of atmospheric corrosion or corrosion caused by chemicals. Our precious clients can acquire the range at affordable rates. Category: PTFE Coating/ Linings Description Features : Good heat resistance Cryogenic stability Enhanced shelf life   Specification : Single Coat Color : Varies As per cleint Size for Coat : As per client’s requirment

• Features: Optimum consistency,Highly temperature resistant,Longer shelf life
• Usage/Application: Industrial Use
• Packaging Type: Box
• Applications: Chemical Plant Equipment, Engine Frames, Pump Bodies
• Purity (%): 90%
• Grade: Industrial grade
• Finishing: Galvanised

We are among the eminent names of the industry that involve in manufacturing, exporting and supplying PFA Coating. Massively applied on shafts, vessels, tank rollers and rods, these coatings are highly used due to the prevention of atmospheric corrosion or corrosion caused by chemicals. Our precious clients can acquire the range at affordable rates.

• Brand Name: Perma Chemicals
• Packaging Size: 20LTR
• Color: Blue
• Type: Waterproofing Coatings
• Pacakging type: Drum
• Minimum Order Quantity: 20 Kilogram

interior coatings, Epoxy Coating, epoxy flooring system, food grade coatings

• Adhesion to: Aluminum, Ceramic, FR4, Metal, Plastic
• Temperature Stable: High, Low
• Dielectric Strength: 425 volts per mil v/mil
• Cure Characteristics: Fast Room Temp Tack-Free Time < 10 min
• Nonvolatile Content: 99.4 %
•  :  

We are into the business of manufacturing and supplying high quality Glass Flake Coatings. Our coatings provide a tortuous path to laminar glass fillers and form a tough impermeable barrier that is ideal for steel and concrete surfaces. Moreover, our Glass Flake Coatings provide long-term protection and minimal maintenance life. Our coatings are resistant to abrasion, cathodic disbanding, severe corrosion and salt spray test.

coal tar epoxy coating, epoxy primers, intermediate coat

Glass Coating, fibre coating, metal coating services, plastic coating

• Brand Name: 5%/10% Strontium + Al
• Grade Standard: Industrial Grade
• Usage: Industrial
• Form: TABLET
• Place of Origin: Maharashtra, India

Heat Resistant Coatings, Fire Entry Suit, Welding Blanket

floor coating, Wood Coating, Polyurethane Coating, plastic coating

corrosion wax coatings, bonding lubricant, non drip ep lubricant

Polyurethane Coating, Epoxy Paints

Liquiguard has developed an innovative lineup of versatile, eco-friendly, water-based coating solutions for leather, plastic and vinyl that will protect, maintain and preserve the lifespan of your most valuable and cherished items.

Wood Coatings, Foundry Chemicals

enteric coating, Bismuth Subsalicylate, Carbinoxamine Maleate

Fluoropolymer Coating, filter sheets, rubber fillets

silicone conformal coatings

Epoxy Coatings, Bricks, Wall Tiles, Sealant, Sand, Floor Tiles