F K Traders Mazgaon, Mumbai, Maharashtra

Weld Neck Flanges are drilled(machined) with the wall thickness of the flange having the same dimensions of the matching pipe, the lighter the pipe is, the larger the bore, conversely, the heavier the pipe, the small the bore, they are normally used for highpressure, cold or hot temperature.This flange is circumferentially welded into the system at its neck which means that the integrity of the butt welded area can be easily examined by radiography. The bores of both pipe and flange match, which reduces turbulence and erosion inside the pipeline. The weld neck is therefore favoured in critical applications. The various types of weld neck flanges are: Weld Neck Flat Face Flanges Raised Face Weld Neck Flanges We manufacture and export a wide assortment of flanges that are available in all sizes, pressure ratings and in all the common configurations. Our range comprises of weld neck flanges, slip on flanges, blind flanges, lap joint flanges, threaded flanges, din flanges, socket weld flanges and more. Fabricated using best grade raw material, these are known for their dimensional accuracy, high strength and durability. Further, our range comply with various national and international standards.These are available in all types and pressures and are widely used for pipe-to-pipe connections. The reducing flange includes a flange with one specified diameter having a bore of a different and smaller diameter. Except for the bore and hub dimensions, the reducing flange will have dimensions of the larger pipe size. To increase the size of the flange, these are used at the outlet side of the expansion joint. It is the most economical method to make a transition in size.

Usage : Industry Use, Fittings Use, Electric Use

Size : 1/8

Certification : CE Certified

Color : Black

Connection Type : Female, Male

Warranty : 1year

Caps is usually used for protecting the end of pipe and other fittings,so the shape is disigned according to the shape of pipe line.we also use caps to cut off the transition and the connection treat can be butt weld,socket weld and thread conection according to use requirements.

Material : Stainless Steel

Shape : Round

Thickness : 10-20mm

Certification : ISI Certified

Application : Cable End Sealing, Industrial Use

Color : Grey

Feature : Excellent Quality, Fine Finishing, High Strength, Non Breakable, Perfect Shape

Circular pipe flange which is slipped over the end of a pipe and welded in. We offer high quality steel slip on flanges that are manufactured stringently following latest technology. Precisely engineered, these inconel flanges possess.The slip-on flange may be attached to the end of a piece of pipe or to one or more ends of a pipefitting. The slip-on flange is positioned so the inserted end of the pipe or fitting is set back or short of the flange face by the thickness of the pipe wall plus 1/8 of an inch. This allows for a fillet weld inside the SO flange equal to the thickness of the pipe without doing any damage to the flange face. The back or outside of the flange is also welded with a fillet weld. A variation of the Slip-on flange also exists. This is the Slip-on Reducing Flange. This is simply a larger (say a 14") Slip-on flange blank that, instead of the Center (pipe) hole being cut out (or drilled out) for 14" pipe it is cut out for a 6" pipe. The SO Reducing flange is basically used for reducing the line size where space limitations will not allow the length of a weld neck flange and reducer combination. The use of the Slip-on Reducing Flange should only be used where the flow direction is from the smaller size into the larger size.These are available in all types and pressures and are widely used for pipe-to-pipe connections. The reducing flange includes a flange with one specified diameter having a bore of a different and smaller diameter. Except for the bore and hub dimensions, the reducing flange will have dimensions of the larger pipe size. To increase the size of the flange, these are used at the outlet side of the expansion joint. It is the most economical method to make a transition in size.

Material : Metal

Shape : Round

Certification : ISI Certified

Color : Silver

Technics : Forging

Size : 1/8 Inch NB TO 48 Inch NB.

Standard : ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48

This flange is slipped over the pipe and then fillet welded. Slip on flat face flanges are easy to use in fabricated applications.A Slip-On Flange is bored sightly larger than the outer Diameter of the matching pipe. The pipe slip into the flange prior to welding both inside and outside to prevent leaks. The British standard flanges manufactured by us pertain to all standards like BS10 1962 Table D,E,F,H IS 6392 Table 5,17,26 IS 1538 in slip. These are manufactured using mild steel both in slip-on and blind type. Our quality slip on flanges are ideal for lower pressure applications. Their ease of fitting and welding reduces fabrication costs. We manufacture and export a wide assortment of flanges that are available in all sizes, pressure ratings and in all the common configurations. Our range comprises of weld neck flanges, slip on flanges, blind flanges, lap joint flanges, threaded flanges, din flanges, socket weld flanges and more. Fabricated using best grade raw material, these are known for their dimensional accuracy, high strength and durability. Further, our range comply with various national and international standards.We manufacture a wide range of Slip-on flanges that is a popular type of pipe flanges. These slide over the end of piping and then welded in place. These flanges are ideal for lower pressure applications and can be easily fitted and welded into different pipes. Welding reduces fabrication costs of these pipes.Key Features : One size fits all pipe schedules. Fabricators can more easily cut pipe to length for slip-on flanges. The smaller thickness of this flange allows for easier alignment of bolting holes. They are generally not preferred for high pressure temperature environments.     Advantages : Low cost installation Less time needed to spent on ensuring the accuracy of the cut pipe They are somewhat easier to align The slip-on flanges have low hub because the pipe slips into the flange before welding The flange is welded both inside and outside to provide sufficient strength They prevent leakage

Certification : ISI Certified

Color : Silver

Shape : Round

Material : Metal

Flange Type : Plain

Specialities : Superior Finish, Rust Proof, Perfect Shape, High Strength, Fine Quality, Durable

Size : Multisize

Type : Short Bend

Material : Metal

Shape : Round

Thickness : 10-20mm, 20-30mm

Application : Pipe Joints

Feature : Fine Quality, High Strength, Perfect Shape, Rust Proof

Type : Pipe Unions

Material : Metal

Application : Fitting Use

Feature : Rust Proof, Heat Resistant, Fine Finishing, Easy To Fit

Finishing : Polished

Packaging Type : Corrugated Box

Country of Origin : India

Material : Metal

Certification : CE Certified

Color : Grey

Feature : Easy To Connect, Electrical Porcelain, Four Times Stronger

Warranty : 1year

Type : Pipe Reducer

Material : Alloy Steel, Aluminium

Shape : Round

Thickness : 10-20mm

Certification : ISI Certified

Application : Construction, Manufacturing Unit, Marine Applications

Country of Origin : India

Type : Pipe Cross Connector

Material : Metal

Certification : CE Certified

Color : Grey

Feature : Easy To Connect, Proper Working, Sturdy Construction, Superior Finish

Connection Type : Female, Male

We are involved in offering various kinds of Stainless steel union coupling that are offered in several specifications including grades, shapes and sizes. These couplings are widely used in various industrial & commercial sectors and thus can be availed at most affordable rates. However, we offer these Stainless steel union couplings to our clients in various customized packings for the assurance of safe delivery.We are one of the prominent manufacturers and suppliers of Stainless Steel Coupling in the marketplace. Our Stainless Steel Couplings are fabricated from the best quality raw materials making them highly efficient and long lasting in nature. Coupling fittings are used for fluid conduits in which each end portion of two tubes to be connected is provided with a swagged-on adapter carrying the necessary means to connect or disconnect the tubes without disturbing the swagged-on adapter. Our range of coupling fittings are available in aluminum, steel and bronze. Fabricated to precision, our range of stainless steel couplings are manufactured using superior grade steel and iron.

Material : Metal

Shape : Round

Color : Grey

Finishing : Polished

Corrosion Proof : Yes

Speciality : Perfect Shape, High Strength, Fine Finished

Size : 1/2 Inch, 2 Inch, 3 Inch, 3/4 Inch

Type : Long Radius Bend

Brand Name : Round

Thickness : 7.5-8mm, 8.5-9mm, 9.5-10mm

Application : Industrial Use, Manufacturing Plants

Color : Shiny-silver, Silver

Feature : Anti Corrosive, Durable

Caps is usually used for protecting the end of pipe and other fittings,so the shape is disigned according to the shape of pipe line.we also use caps to cut off the transition and the connection treat can be butt weld,socket weld and thread conection according to use requirements.

Size : Multisizes

Material : Metal

Diameter : 10-15mm

Application : Corrosion Resistant, Fastener, Resembling Roofing, Watertight Joints

Color : Grey

Surface : Black Oxide, Bright Nickel, Galvanized

Thread : Full Thread, High Resistance

The socket welding flange was created specifically for small piping that must withstand high pressure and/or contact with chemicals. With expert grinding and welding, socket welding flanges allow the unfettered flow of any type of liquid.We are a trusted manufacturer of a wide range of Thredolet Fittings that are manufactured using high grade material. These are in conformation with the industry standards and are offered in various specifications to our clients. Our range finds applications in various industries and is known for its durability, corrosion resistance & long service lifeThe connection with the pipe is done with 1 fillet weld, at the outside of the flange. But before welding, a space must be created between flange or fitting and pipe.We are a renowned Forged Flanges Manufacturer and supplier, presenting steel forged flanges. We manufacture wide range of flanges which includes forged flanges, steel forged flanges etc. We have up-to-the-minute equipments which ensure the optimum quality of our flange products. Our steel forged flanges are available in distinctive sizes and shapes. Wee polished flanges are exclusively admired by our esteemed clients. Lastly, our entire flanges products are available at the most reasonable price.Features : ITEM Size Range Pressure Rating Slip On, Weld Neck, Blind, Socket Weld, Screwed, Lap Joint, Reducing Type. 1/2" To 60" 150, 300, 600, 900, 1500, 2500 lbs Orifice Flanges Complete with Taping, without JACK SCREWS. 1/2" TO 48" 150, 300, 600, 900, 1500, 2500 lbs ANSI B 16.5, B 16.1, B 16.47 Series 'A' and 'B', MSS SP-44, JIS SK, 10K, 16K, DIN, BS 4504 or any other as per customer's requirements.

Size : 10Inch, 4Inch, 5Inch, 6Inch, 7Inch

Type : Forged Flanges

Material : Metal

Diameter : 10-20mm, 20-30mm

Shape : Round

Application : Automobiles Use, Fittings, Industrial Use

Caps is usually used for protecting the end of pipe and other fittings,so the shape is disigned according to the shape of pipe line.we also use caps to cut off the transition and the connection treat can be butt weld,socket weld and thread conection according to use requirements.

Country of Origin : India

Type : Forged End Caps

Material : Metal

Shape : Round

Application : Industrial Use

Color : Black

Feature : Corrosion Proof, Durable, Excellent Quality, Fine Finishing

Type : Bending Tools

Material : Carbon Steel

Certification : ISO Certified

Color : Black-grey

Condition : New

Finishing : Polished

The function of a elbow is to change direction or flow in a piping system. By default, there are 5 opportunities, the 45°, 90° and 180° elbows, all three in the "long radius" version, and in addition the 90° and 180° elbows both in the "short radius" version.Elbows are split into two groups which define the distance over which they change direction; the center line of one end to the opposite face. This is known as the "center to face" distance and is equivalent to the radius through which the elbow is bent.  The center to face distance for a "long" radius elbow, abbreviated LR always is "1½ x Nominal Pipe Size (NPS) (1½D)", while the center to face distance for a "short" radius elbow, abbreviated SR even is to nominal pipe size. Elbow 90°- 2"- LR : = 1½ x (25,4 x 2) A = 76,2 mm Elbow 180°- 2"- LR : = 1½ x (25,4 x 2) x 2 A = 152,4 mm Elbow 90°- 2"- SR : = 25,4 x 2 A = 50,8 mm Elbow 180°- 2"- SR : = (25,4 x 2) x 2 A = 101,6 mm

Country of Origin : India

Type : Buttweld Elbow

Material : Metal

Shape : L Shape

Application : Fittings Use, Industrial Use

Feature : High Strength, Non Breakable, Perfect Shape, Quality Tested

Finishing : Coated, Polished

Blind Flange is use to closes the end of a pipe. Fabricated using finest quality of stainless steel blind flanges, our range of blind flanges plate type are widely used to close the ends of pipes, valves, pressure vessel openings and other channels where one end needs to be blanked off.Blind flange is a kind of round plate with no center hole but with all the proper bolt holes. It is used to blank off the ends of piping, valves and pressure vessel opening. From the standpoint of internal pressure and bolt loading, blind flanges, particularly in the larger sizes, are the most highly stressed of all flange types.

Size : 1/8 Inch NB TO 48 Inch NB.

Weld Neck A Blind Flange is which has no bore, and is used to close ends of piping systems. A blind flange also permits easy access to a line ones it has been sealed. The blind flange is sometimes machined to accept a pipe of the nominal Size to which reduction is being made. The reduction can be either threaded or welded.This flat face blind flanges are used to blank off pipelines, valves and pumps, it can also be used as an inspection cover. It is sometimes referred to as a blanking flange.

Flange Type : Plain

Corrosion Resistant : Yes

Material : Metal

Shape : Round

Certification : ISI Certified

Color : Grey

Finishing : Polished

Size : 10-20 Inch, 20-30 Inch

We bring forth an assortment of Socket Weld Tee, which is manufactured with premium quality raw material. We offer these products in the sizes of 1/2”-4” and class 2000/ 3000/ 6000/ 9000. Offered at market leading prices, the range is appreciated world-wide. Also, these products are available in the following grades: ASTM/ASME SA 105 ASTM/ASME SA 350 LF2/LF3 ASTM /ASME SA 182: F304/ F304L/ F304H/ F316/ F316L/ F317/ F317L/ F321/ F310/ F347/F904L CHROME-MOLY grades of F5, F9, F11, F22, Plus Duplex, and Exotic Alloy. OUR socket weld fittings range from 1/8”-4” ASTM/ASME SA 182 : F1/F5/F9/F11/F22/F91 Heavy metal alloys : Monel, Nickel, Inconel, Haste alloy, Copper, Brass, Bronze, Titanium, Tantalum, Bismuth, Aluminum, Duplex Steel, Super Duplex Steel, Zinc, Lead

Country of Origin : Made In India

Size : Multisize

Elbow Bend Angle : 90 Degrees

Elbow Type : Long Radius

Usage/Application : Plumbing Pipe

Surface Finishing : Polished

Country of Origin : Made In India

90 degree elbow, also called "90 bends or 90 ells", are manufactured as SR (Short Radius) elbows and LR (Long Radius) elbows. SR (Short Radius) elbows have a Center-to-Face dimension of 1.0 X diameter and are typically used in tight areas where clearances are an issue. LR (Long Radius) elbows have a Center-to-Face dimension of 1.5 X diameter and are the more common type and used when space is available and flow is more critical.A 90 degree elbow attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. Available in many materials like silicon, rubber compounds, galvanized steel etc, they connect rigid or IMC circuit together to allow for 90 degree bends. This is a fitting device which is bent in such a way to produce 90 degree change in the direction of flow of the content in the pipe. An Elbow is used to change the direction in piping and is also sometimes called a "quarter bend".FeaturesThe main application area of an elbow (90 degree) is to connect hoses to valves, water pressure pumps, and deck drains. These elbows can be made from tough nylon material or NPT thread.

Material : Metal

Elbow Bend Angle : 90 Degrees

End Connection Type : Buttweld

Usage/Application : Plumbing Pipe

Thickness : 2mm to 7mm thickness

Surface Finishing : Polished

Country of Origin : Made In India

Material : Metal

Elbow Bend Angle : 45 Degree

Usage/Application : Plumbing Pipe

Surface Finishing : Polished

Rust Proof : Yes

Country of Origin : Made In India

45 degree elbow, also called "45 bends or 45 ells" are typically made as LR (Long Radius) elbows. Available in various sizes (in mm or inches), 45 degree pipe elbow is available with different male to female BSP thread connections. Providing a wide choice of colors, these elbows can be manufactured to meet different specifications, in terms of size and diameter.The function of a elbow is to change direction or flow in a piping system. By default, there are 5 opportunities, the 45°, 90° and 180° elbows, all three in the "long radius" version, and in addition the 90° and 180° elbows both in the "short radius" version. Applications : 45 degree elbow find frequent applications in: Water supply facilities Food industrial pipeline networks Chemical industrial pipeline networks Electronic industrial pipeline networks Air conditioning facility pipeline Agriculture and garden production transporting system Pipeline network for solar energy facility

Usage/Application : Plumbing Pipe

Country of Origin : Made In India

Thickness : SGP, STD, SCH40, SCH80, SCH160. XS,XXS and so on.

Material : Carbon Steel , Alloy Steel, Stainless Steel