Facing Tool Dealers

• Country of Origin: India
• Material: Metal
• Application: Milling Industries
• Color: Grey
• Feature: High Strength, Fine Finished, Best Quality
• Finishing: Polished

The FM-1625 is a light weight and compact machine for facing, bevelling and weld preparation on all materials including stainless steel, duplex, inconel and others. One operator performs weld preparations safely, accurately and quickly vs. the slow and cumbersome grinding operation. Easy to handle and quick to setup. Used in shutdown environments on condensers and heat exchangers.

• Material: Cast Iron
• Shape: Round
• Thickness: 10-20mm, 20-30mm, 30-40mm
• Application: Milling Industries
• Color: Grey, Silver
• Feature: Best Quality, Corrosion Proof, Fine Finished, High Strength
• Finishing: Polished

We deal in the finest quality Spot Facing Tools in the national market. Our Back Spot Facing Tools are used for back spot facing / chamfering on jobs using drilling machines, Machining centers, Boring machines etc. Their cycle of working can be programmed. Additionally, we are a prime Forward Spot Facing Tool Manufacturer in India. Rear spot facing around the hole is a cumbersome operation while adopting the conventional boring bar with HSS blades or cutters. The time required for fixing, setting and removing the blade/cutter is very high; being HSS, the cutting is very slow; and, whenever the cutting edge becomes blunt, it requires expensive and time â�� consuming regrinding. All these result in the very high down time of the main machine. The automatic back spot facing tool is specially designed to make the back spot facing operation faster and cheaper. Since it totally eliminates manual interruption during back spot facing operation, not only expensive machine down time is saved, but also it is the most ideally suited tool for back spot facing operation on programmable /CNC machining centers. As the most of tools are offered with standard carbide insert, all the advantages of insert tooling will be available. Construction The back spot facer consists of a case hardened and ground alloy steel shank, which takes location in the hole on which back spot facing is carried out. Provided in the pilot shank is a recess, for accommodating the insert holder or wing. Clamped on the wing is standard carbide insert with the help of a clamp screw. Being LH threaded, it holds the insert in a correct position. In the recess, the wing is eccentrically pivoted on hardened and ground pivot pin and pivot screw. A suitable clearance is provided on the pilot shank to enable it to freely rotate in a drilled hole. These tools are so designed that with various combination of pilot shanks, it is possible to obtain different back spot facing combinations. Sizes and Specification The back spot facing diameter is offered in relationship to its pilot shank diameter â�� i.e. at ratio 2:1. In other words, back spot facing is possible with this type of tool up to approximately twice the diameter of the nominal diameter of the pilot, subject to some design restrictions. Tools below 12mm pilot are normally offered with solid HSS wing, having integral pivot pin.  Operations The automatic back spot facing tool, rotating in reverse direction, is inserted in to the hole. The wing, even it opens in rotation, instantly folds into the recess as it touches the rim of the hole in the work piece. After the wing clearly comes out of the pilot hole, the spindle rotation is reversed to forward direction. Then the wing swing out of the recess due to centrifugal force. With feed it cuts. On completion of the spot facing operation, the spindle rotation is reversed and the tool is withdrawn. During the back spot facing, since cutting force tends the tool to pull down of the spindle, it is adviceable to fix the tool in the machine spindle with a cotter/drive key/draw bolt. It may be noted that the smaller size tools are running at comparatively higher speeds. Here, the wings, therefore, swing out easily due to high centrifugal force. However, large tools operate in lower speeds, which mean centrifugal force acting on the wing may be insufficient, particularly when the tools work in horizontal position, thus resulting the wing to remain in the recess. To overcome this problem, tools above 300mm pilot are provided with spring washer as shown in the sketch. The spring washer keeps the wing open after it comes clear of the pilot hole, irrespective of the speed at which the tool is being rotated.

The “Back Spot Facing Tools” perform manual or automatic back spot facing and counterboring operations on any type of CNC, Two standard cutters are available from stock: » Cutter designed for front & back chamfering operations. » Cutter designed for front & back-spot facing operations. Advantages: » Save time & mone. » Low Investment. » Compatibility.

• Color: White
• Type: PIPES AND TUBES
• Packaging Details: Packed and seal in a Box
• Model Number: BEVELING MACHINE
• Brand Name: POWERTECH
• Port: MUMBAI
• After-sales Service Provided: Overseas third-party support available

Press the pivot pin in the bore, provided on the tool shank. Position the wing in the pocket through the pivot pin. Screw on the pivot screw through the tapped hole till its point enters the cone, provided in the bottom of the wing. Tighten the pivot screw till the clearance between the pivot pin and pivot screw is just sufficient for the wing to freely swing in and swing out of the pocket, at the same time avoiding any axial and radial play. Lock this position by tightening the lock screw through the aluminum binder. It is advisable to release the pivot screw by about 30% before locking, so as to nullify the possible thermal expansion during cutting. Do not over tighten the insert clamping screw. Solid HSS wings are with integral pivot pin. Regrind the blunt cutting edges of HSS wings.

We offer high quality facing tools with best quality material and as per the specification of the client at industry leading price.

• Features: Sturdiness,Durability,Precise dimensions.

• Material: Brazed Lathe Machine Tools
• Finishing: Paint Coated
• Color: Blue And Also Available in Red Yellow,Silver
• Brand: Yash
• Length: 2-4 inch
• Chord Thickness: 12.5mm And Also Available In 9.5mm,16mm,19mm,25mm

• Brand Name: JS Tools
• Material: Carbide Tipped, Stainless Steel, High Speed Steel, Cobalt, Solid Carbide
• Features: Featuring superior construction standards , Low Maintenance
• Size: All
• Quality: A+

TheFacing head is integrated into the headstock above the Main Spindle.The Position of the Facing Head is important in context of covering the diameter range. The Main Spindle slides inside the headstock, allowing the Facing head to rotate for its full range from Zero to Maximum diameter of its Model designed. The “U” axis travel varies for each Model. Please see the Technical sheet for details.

• Item Code No.: Size of Shank mm
• ABM-CT-12400: 6 x 96
• ABM-CT-12401: 6 x 140
• ABM-CT-12402: 8 x 140
• ABM-CT-12403: 10 x 140
• ABM-CT-12404: 12 x 140

• Material: MS
• Color: Blue
• Country of Origin: Made in India
• Usage/Application: Lathe Machine
• Size/Dimension: 14 mm
• Packaging Type: Packet

automatic back spot facing tools, Boring Head, Milling Head

Cranked facing tool offset end – cutting tools [iso 5, din 4977] are a style of cutting tools which are carbide cutting tools, also called as lathe tools and are used used as metal cutting tools in machine shops for a large variety of materials on engine...

facing tools, Precision Turned Components, Drilling Tools, threading tools

automatic back spot facing tools, Mobile phone, Boring Head, Milling Head

automatic back spot facing tools, Burnishing Tools, burnishing machines

Inserts Boring Cum Facing Tool, Emery Rolls Sheets, Universal Tilting Tables