Fault Locators Dealers in Mumbai

Consists of a transmitter and a receiver Used to detect or trace conductors and to find short faults in them. The signal generated by the transmitter is made to a modulated current, generating an electromagnetic field around a conductor. This electro magnetic field induces a voltage within the receiving coil. The induced voltage is amplified, decoded and converted to the original signal by the received and finally displayed on screen. It is used for finding  conductors  in  walls, conductor interruptions, short-circuits in conductors Conductor tracing in the soil Detecting fuses and assigning current circuits Tracing sockets and distribution sockets having accidentally been covered by plastering Detecting interruptions and short-circuits in floor heating Tracing metallic water and heating piping All application areas (both,voltage-free and live) are performed without usin any additional instruments Transmitter display indicates the transmission level,the transmission code, as well as the foreign voltage Receiver display indicates the reception level,the transmission code,as well as the mains voltage detection Automatic and manual sensitivity adjustment Acoustic reception signal may be switched off Auto-Power-Off function Backlight Additional lighting function when working under bad lighting conditions Additional transmitters are available to extend or distinguish several signals

We are offering cable fault locator we have great pleasure to inform to you, we provide complete set of equipments in the field of cable laying projects. Along with the same, as we discussed, we also deal in fault detection for u/g & o/h lines with pre warning facilities on the live line before the actual fault occurs & various testing equipments for electrical parameters on hv transformers, cables, ct, pt, gis, etc. Van mounted with all in one set of equipments.

Underground power cable fault locator suitable to locate U/G power cable faults form 440 volts to 400KV. Cable fault locator (Surge generator) has been primarily designed to produce high voltage surges for pre-location of under ground power cable fault in combination with Reflectometer T-510. 

One Piece Cable Fault Locator from VON CORPORATION, USA using Arc Reflection Method - 240V AC Model. 25kV Fault LocatorSectionalizer. Simple operation, On, Radar, Start and unit gives distance to the fault. 1563 joules at both 12.5kV and 25kV. Radar Auto-ranges and Auto-Locates the fault. 1563 joule "dual thump capacitor" provides full energy at 12.5kV and 25kV. 15 Second thump interval.

• Feature: Small size, light weight and ABS plastic housing which is ergronomically designed for easy use by user,Menu driven simple operation,Measurement maximum 8 km in selectable ranges, Tests any type of copper telecom and signal cables,Range, VOP and Gain are s
• • Display Readout: Color LCD -480*280·
• • Continued operating time: 8 hours
• • Charging time: 3 hours
• • Power Supply: 7.4V Rechargeable Li-ion battery. Charging voltage 230V +/-10%, 50Hz, single phase.
• • Storage Temperature: -15°C
• • Working Temperature: -15°C
• • Dimension: 212 (L) × 170 (W) × 90 (H) mm (approx.)
• • Weight: 1.20 Kg Net (approx.)

• Display Type: LCD
• External Voltage Detection Range: 12 to 400 V
• Frequency Range: 0 to 60 Hz
• Output Signal Frequency : 125 kHz
• Current Consumption: Max. 18 mA
• Power Supply: 9 V battery, NEDA 1604, IE6F22
• Model Name/Number: CFL-01
• Brand: Metravi

• Application: Telecom,CATV And Networking
• Power: 10 MW
• Model Name/Number: VFL 10
• Material: Aluminium
• Size/Dimension: 15 cm
• Weight: Upto 100 Gm

• Brand Name: Megger
• Power: 120 volt,60 Hz
• Dimensions: 13 H x 14 W x 10 D in. (330 H x 356 W x 254 D mm)
• Weight: 25 lb (11.3 kg)

• Used to: find the point where metal is touching the ground (shield is rusted/rubber buffer is broken) and power is leaking, creating noise on a cable.
• Current Frequency: 8 kHz
• Display: 1.28 in, 128 x 128 BW outdoor LCD display with auto backlight
• Features: Adjustable volume control, Works in conjunction with the UAT-600-T Transmitter.

• Voltage: 230 V
• Brand Name: Sonel
• Model Name/Number: p12i
• Operation Temperature: 0 D C - 50 D C
• Dimensions: 800 x 581 x 482 mm
• Frequency: 50/60 Hz
• Dimension: 800 x 581 x 482 mm
• Weight: Approx 85 kg
• IP Rating: IP54
• Power Consumption: 500 VA
• Pulse Width: 50 ns - 10 S

• Type: MT3010A
• Frequency: 2.4GHz-2.5GHz ISM mircowave
• Communication mode: dynamically encrypt mode
• Asynchronism communication speed: 1Mbps
• Signal modulation mode: GFSK
• Working mode: Undirectional transmission
• Microwave message wrong-checked: CRC8 cycled redundance checkout
• Identified mode: External antenna directional or omni-directional, Directional Angle: Horizontal 60 degree,vertical 60 degree, Omni-directional Angle: 360degree
• Identified distance: Maximum 30m (distance is adjustable)
• Anti-collision: Can read at the same time>100pcs tags
• Wrong probability: one of ten million
• Sound indicating: Inner buzzer
• Developing porthttp://members.exportersindia.com/manage-products.php: offer all types of port function
• Data interface: Operating the locator by RS23
• Power supply: DC+7
• Work Temp.: -20℃
• size: 100*65*26mm

Cable Fault Locator, power meters, Battery Tester, Circuit Breaker Analyser

Ground Fault Monitoring System, three phase ups, K Rated Transformer

Dc Earth Fault Locator, circuit breaker analyzer, Resistance Decade Box