Filling Line Dealers in Saki Vihar, Mumbai

• Warranty: 2 year
• Material: Stainless Steel
• Capacity: 25-30 FILL
• Country of Origin: Made in India
• Usage/Application: Industrial
• Automation Grade: Automatic
• Brand: METTLER TOLEDO
• Power Consumption: 440 V AC

• Driven Type: Electric
• Model: NAPF-1
• Number Of Filling Heads: Single Head
• Usage/Application: Industrial
• Air Consumption: 4 to 6 kg pressure
• Height of Conveyor: 860 mm (+ 50 mm adjustable height) 

The plant consists of: 1 complete neutralization tank agitator solutions to neutralize # 1 filter press with pneumatic pump   The press is used for the filtration of the neutralized solutions and retain the oxides of copper, zinc etc. destined to companies authorized to process them.   The structures of the filter press, from smallest to largest, are of the monolithic type, realized in carpentry and subjected to electro-mechanical controls and accurate machining. In the design we were considered unitary stresses in the materials contained within very low values, even at maximum operating pressure. The heads and the longitudinal members are coated stainless steel or other materials according to the chemical characteristics of the liquid to be filtered. In the filtering elements, the fabric, the shape and dimensions of the plates, as well as the materials used, they represent the most important part. The selection of these items is the result of years of experience of those who know these problems. The pump is equipped with electronic control by means of the probe level for the drive and the automatic shutdown.

• Drive: 0.25 HP 3–Phase 50 Cycles
• Dimension: L 630 mm x W 490 mm x H 985 mm
• Weight: 100 Kg.

This equipment has been rated as ideal for small / medium scale Pharmaceuticals Units. The design is unique and extremely functional. The equipment is Simple to Operate, is time and labour-saving. The Automatic Capsule Loader is compact, occupies minimal space, is easily movable and is simple to operate. It gives higher production at a lower cost and with much better standards of accuracy than the earlier semi-automatic machines, which are being phased out gradually in most units.  AUTOMATIC CAPSULE LOADER can make a significant difference in your Production Department. Output :  Fills 300-hole plate in 28 seconds. The vertical loader can fill 2 or 3 manual capsule filling machine tray depending on the quality of the capsule and the sill of the operator.

Superior grade, economical prices and unmatched standard distinguishes our Manual Cap Sealing Machine from others in the market. Raw materials form the basis of any product and thus we obtain them after checking against varied quality parameters. Moreover, we procure raw materials only from reliable sources.

• Brand Name: Daikin
• Material: Stainless Steel
• Color: White
• Power: 3-6kw
• Operating Type: Automatic
• Chiller Shape: Rectangular
• Voltage: 220V
• Finishing: Polished
• Driven Type: Hydraulic
• Usage: Air Cooling

As a trusted Liquid Filling Machine Manufacturer, exporter and supplier we offer an advanced range that can be availed in a wide variety. The complete range is designed by experts to match international standards and manufactured using the precision components and other materials. Known for delivering superior performance, the Liquid Filling Machines offered by us are tested on various parameters to assure hassle-free operation together with a long functional life.

• Condition: New

• Type: Manual Capsule Filling Machine, Canvas Paintings
• Certification: ISO 9001:2008
• Condition: New
• Automatic Grade: Manual
• Color: Grey
• Country of Origin: India
• Brand Name: ACE
• Weight: 60
• Capacity: 30

Salient Features : ·Design is cGMP - Current Good Manufacturing Practices compliance ·All Product contact parts AISI 316 & non contact parts AISI 304. ·Octagonal shape product container for Ideal dry mixer for lubrication of granules and homogenization mixing of multiple batches in to single batch. ·Available Capacity model in octagonal blender 25 kg to 5000 kg batch size. ·Enclosed rigid drive with reduction gear box and motor. ·"A" type rigid structure of the machine with two sides resting of product container. ·Product container having discharge with butterfly valve and man hole. ·Charging hole with hinged lid with seal for charging and cleaning. ·Safety reeling provided for rotating area of product container. ·Fixed baffles provided for lumps braking. ·Electric controls panel with cycle time

• Brand Name: CRYO CORP
• Condition: New
• Power: Electric
• Pressure: High
• Application: Cryogenic
• Type: Liquid Oxygen Pump
• Fuel: Electric
• Structure: Piston Pump
• After-Sales Service Provided: Yes
• Country of Origin: India

• Color: Brown, Creamy, Green, Multicolor, Off White, Red, White
• Pattern: Plain, Printed, Striped,Plain and printed
• Feature: Durable, Easy To Carry, High Strength, Moisture Resistance, Perfect Finish, Recyclable, Water Proof
• Storage Capacity: 100kg, 20kg, 25kg, 30kg, 50kg,1 ton
• Feature: Easy To Carry
• Condition: New
• Industrial Use: Agriculture, Mailing, Promotion, Shopping
• Capacity: 500kg - 2000kg
• Safety Factor: 5:1
• Model: VTC-BNW/BGW
• Bag Size: 90x90x80 cm
• Loading Weight: 500KG to 2000KG
• Dimension: 90 x 90 x 120 cm

Volumetric Standard Laboratory Chemical, Glass Desiccator, Laboratory Cone

• CAPACITY: 50 to 2500 Ltrs.

Purified water with max. conductivity of 0.5 micromhoscm. should be used. Pressure should be 1 kgcm² higher than the in feed steam pressure. Temperature – Ambient 30ºCSave water consumption & Boiler steam consumption. Complete close loop system. No air contamination. On line conductivity. If sub standard conductivity will come dumping automatically through 3 way valve

Edible Oils, agarbathi, Incense Sticks, Baby Wipes, telephone adapter

• Output: 6 to 20 pouches/min/head.(depends on material flow ability & dosage.)
• Head Options: 1 Head, 2 Head, 3 Head, 4 Head, 6 Head.
• Packaging material: Any ready pouches like Jar, Bags, Containers etc.
• Power Requirement: 220V AC 1 Phase, 50 Hz.
• Compressed Air Required: 5 kgf/sq.cm.
• Capacity: 10gm to 1kg 100gm to 2.5kg 200gm to 5kg 500gm to 10kg 1kg to 25kg 2kg to 50kg

  We are the leading manufacturer, trader & supplier of Semi Automatic 2 Head Weigh Filler. This linear weigher machine is widely considered on various industries owing to its performance. Our linear weigher machine is manufactured as per the set company standards by utilizing quality proven material. This linear weigher machine is examined on numerous provisions of quality to make certain their flawlessness. Our customers can purchase this linear weigher machine from us at pocket friendly prices.

We are offering liquid filling line.

The SI line has been designed for customers who require high production levels without forgoing flexibility that will allow them to operate with different formats. A SI-360 may therefore be equipped to work in quadruplex at production rates of 240 pouches per minute and with format change thereafter to operate in triplex with a larger format. The SI-360 Duplex version provides the option of working with pouches of up to 1500 cc at a production rate of around 100 pouches per minute.

The Jar filling line is a clean and efficient solution for a modern filling plant. It involves a jar brushing machine and a separate Rinsing, filling and capping machine. The brushing machine is manually operated but the Rinser, Filler and Capper is automated after bottle loading. The rinser involves a four stage rinsing system that will use detergent water to clean and treated water to rinse the inside of the jar. The outside of the jar is cleaned by the Jar brushing machine. All the water in the jar or any that is accumulated on the body is allowed to drain off. The jar is tilted 180° during the entire rinsing cycle, after draining the water it is righted once more and sent to the filler. The filler nozzle is controlled pneumatically; it enters the Jars mouth and fills up to a pre-set exact volume. The filling level is controlled by an electronic level controller. The jar then passes under the cap dispenser where it will pick up a cap, the cap is the pneumatically pressed on to the bottle mouth. The jar is then placed on to a pallet manually

This machine can be used to fill tubes, bottles, jars, Containers and even tins for various products of pharrna, food, Ayurvedic, cosmetic & rubber industries by quick change of parts. The Filling mechanism works on manual lever mechanism coupled to piston to fill the material. The unit is supplied with s.s.304 Q contact parts (316 Q Optional) and it consist of SS hopper (jacketed optional) S.S. Cylinder, Silicon piston rings and washer set. The unit is assembled on cost iron body (enamel painted) and can be fitted on working table/steel etc. T he unit is compact and can be shifted easity.The total weight of the unit is 10 Kg approx.   Applications : Pharma, food, ayurvedic, cosmetics and rubber industries

We offer Time Flow Filling Machine. Time flow filling machine is used for filling different kinds of liquids in various industries. This machine is well-appreciated among the clients for its high performance and durability. We are renowned as the trusted manufacturer and exporter of time flow filling machine. Specialty automatic operationdurabilityanti- corrosivehigh performance specifications drip free nozzles with filling range of 100ml to 500dml with drip tray for accidental drip.available from 4 head to 20 headmitsubishi make plc system with 4" touch screen and vfd for conveyor speed control.contact parts in stainless steel 304 qualitybody frame made up of m.s. With powder coating or stainless steelneck entry nozzle system so that the nozzle enter inside the container before filling to avoid spillage12 feet conveyor with 6 inches stainless steel slatepneumatically operated nozzle up down movement e stopper gates for bottle entry and emitin built memory to store 25 filling setting datefilling accuracy of +l'- 0.25%power 415 volts 3 phase si1 hz.

Automatic Linear Piston filler is extremely flexible filler capable of filling accurately and rapidly any viscous liquids. Product delivery from your bulk tank to the pistons can be configured with a buffer tank utilizing a level-sensing float, a manifold with direct draw, or recirculation methods. The Automatic Linear Piston Filler is manufactured with a 304 stainless steel frame and is capable of supporting 1 to 12 fill heads. PLC controls, touch screen HMI, food grade contact parts, stainless steel and anodized aluminium construction and many more features come standard. Automatic Piston Fillers are designed to add efficiency to any production line used in the Pesticide, cosmetic, food service, specialty chemical, pharmaceutical, and personal care industries. Additional options are available for sanitary, hazardous, flammable and corrosive environments. • 304 stainless steel heavy duty stainless steel welded C frame • All contact parts are stainless steel, sanitary, Teflon, Viton and hoses per your requirements • Real time adjustability • No bottle no fill, PLC controls accurate filling volume, within ±1% and a total bottle counter • Easy to maintain, no special tools are required • Special seals or hoses by order • Blocked nozzles for products that tend to string and drip diving nozzles for bottom up filling of foaming products bottle mouth localizer • The filling head can also be added to suit your special needs   Volumetric filling machine supplied with cylinders, suitable for filling of edible oil into PET/HDPE bottles or tins. Some of these machines are having Possibility to adjust cylinder capacity. Filler complete with stainless steel upper tank with stainless steel floating device for liquid level control.

� Suitable to fill a variety of semi viscous products in tubes � Option for lamy, plastic, metal tubes � Combi for lamy and metal tubes available (optional) � Manual or automatic tube feeding � Automatic tube loading from the tube magazine (Optional) � Automatic tube orientation � Single or double head option available � Diving nozzle for an accurate dosage of the bottom of the tube. � Hot air system with imported air gun for laminated tubes. � Possibility to realize sealing system following the Customer drawings such as round edge, curved seal, wave seal etc. � Simplified and easy change of size parts, without tools � Complete digital panel with optional PLC � VFD for main drive (optional) � Jacketed hopper with stirrer (optional) � Batch printing option available � HSAjet printer for special printing (optional)

This is a vertical form, fill and seal machine for packing all types of free flow products. This machine shall make center seal pouches. This model is mainly designed to pack 100 gm to 1000 gm product packing. Maximum reel width can be used in this model is 450 mm open width with 76 mm core ID. Variety of filling systems can be used in this model as suitable to products. Pouch length is controlled by electromagnetic clutch brake and vector driven draw down pair of belts which is synchronized with PLC and print registration sensor. Unprinted packing material can also be used i9n this machine

liquid filling machineries, Conveyors, cosmetics machineries

We are offering dissolved acetylene gas plant. F no bulky gasholder required. F automatic controls for feeding water, maintaining temperatures, pressures, and slurry drain are, fool proof, efficient and are of international standard. F excellent absorption of gas in cylinders. F no gas loss and high yield. F very simple and safe to operate. F low power consumption. F low maintenance cost. F manufactured as per designs and drawings approved by the chief controllers of explosives. F manufactured under isi quality marking.

We have a manufacturing and service plant with an area of 1,000 sq. Meters, stock of various machines, tools and test equipment and procedures for manufacturing and maintenance of fire extinguishers.