Filter Assembly Dealers in Andheri, Mumbai

We are offering instrument filter regulator. Airmatic fr 67 series service : gases or compressed air filter-regulator sizes: 6 mm (g 14", 14"npt) flow: up to 40 scfm compact in size, suitable for oem applications high flow capacity with minimum pressure drop. High performance over wide flow range application: pilot controllers, valve positioners, pneumatic instruments

• Diameter: 750mm
• sizes: 12

These are availabe in various sizes from 12" to 48" diameter. The most common size used is 20" diameter (550mm) & 30" diameter (750mm). The silicon which is of food grade quality, transparent in apprearance, non toxic is moulded on the stainless steel ring. The mesh sizes varies from 4 mesh to 500 mesh with A.S.T.M standard being certified on 90 X microscope.These are available with complete set of cerificates. Sieves suitable for Sweco, Russell, Pennwalt Sifter and all Indian Machine Manufacturers.

• Brand Name: Hitek
• Condition: New
• Material: Finest qulaity of raw Materials
• Place Of Origin: Mumbai,India
• Usage: Chemical Industries

We offer Liquid-Liquid Extraction Column for any type of extractor and highly demanded for those substances which are chemically dissimilar and have chances to undergo thermal decomposition even at the high range of temperatures. Our Liquid-Liquid Extraction Column meets all the requirements of purification. Liquid-Liquid Extraction Column that we offer is easy-to-install and has proper mechanical support as well as low energy rate. It is a mass transfer process in which a direct contact is made by liquid solution with an immiscible or near to immiscible solvent to display the selectivity towards the one or more components of the substance. The process results in two output forms, one is extract that is carrying solvent rich solution and other raffinate, holding the residual feed solution with little bit solute. Network Area : Our manufactured products are made up of finest quality of raw materials due to which it ensures durability in the product nature. There are mainly three factors in our designed products which are the main keys of our success and these are quality designs, competitive price and timely delivery. We Have Cover Following markets : USA : Montana, Florida, New-Mexico South-Dakota, Texas, New-Jersey, Alaska-Nevada, etc. Middle East : Oman, Arabia, Saudi Cyprus, Egypt, Jordan, Kuwait, Yemen, Syria, Israel, etc. Europe : Monaco, Andorra, Albania, Malta, Poland, Croatia, Austria, Sweden, Italy, Finland, etc. Others : Maldives, Bhutan, Nepal, Pakistan, China, Bangladesh, Myanmar, etc. Indian Areas : Haryana, Madhya-Pradesh, Gujarat, Himachal-Pradesh, Mumbai, Assam, Bihar, Andhra-Pradesh, Punjab, Delhi, Karnataka, West-Bengal, Orissa, Rajasthan, etc.

It is made from Plain mesh Twill weave, Perforated Sheet, Expanded Metal, Welded Mesh in material 202 304 316 are fabricated in different shapes&sizes. Multi Layered Wire Mesh filters are either brazed or spot welded& then can be fitted in either seamless Aluminum orStainless Steel Frames. It can be manufactured in any shape which suits clientsspecification.

• Material: Stainless Steel
• Color: Silver
• Application: Laboratary Use,Filtration
• Country of Origin: India
• Surface Finishing: Polished
• Pattern: Plain

• Country of Origin: India
• Type: Filter Nozzle
• Material: Plastic
• Application: Industrial
• Feature: Fine Finished, Heat Resistance, Highly Durable, Light Weight, Non Breakable, Rustproof, Sturdy Design
• Condition: New
• Pressure: High
• Color: white
• Material: PP
• Size: ALL

• Thickness: 3 - 3.2 mm
• Material: MS, SS, GI, Aluminium
• Weave type: Plain Weave
• Hole Shape: Square
• Features of filter pads: Quality assured, Flawless finishing, Thrifty prices

We work to please our valuable customers with our excellent services and superior quality product range including Filter Pads. Our offered Filter Pads is perfect in dimension and high in quality. The user can get our entire product range at market leading prices. We have given extra fine finishing to our final product range and offer the same to our valuable clients. We provide customized packaging to our products at the time of delivery.   Types of Filter pads The types of the filter discs depend on the material, shapes and weaves The popular types Plain weave Filter pads, Mild Steel Filter Pads, Stainless Steel Filter Pads, Galvanised Steel Filter Pads, Aluminium filter pads, Square filter pads, Plain weave SS filter pads

POLYPOR TM Porous Plastic Filter Candles for Air Dryer Applications are manufactured by omni-directional inter connecting pores permeable structures.  These techniques give a wide range of precisely controlled pore size and pore distribution. There is no detoriation from inside and outside, as it is made from Polypropylene plastic material and resistant to almost all chemicals and solvents. While filtering air, it repels oil and water and only air is passed, as the cartridge is leakered with Silicon Resin-Non stick surface. Contaminates of filter cartridges are more easily evaluated by visual examination, as initially it is pure white plastic material. Cartridges are also available with activated carbon block to make the air odor free. The entire volume of cartridge is used; consequently the filter has high storage capacity for the particle sizes. Properties: Free flow with a very low pressure drops ranging from 5 to 10% according to the number of cartridge installed. The working pressure is upto 200 P.S.I. Easily cleanable by household soaps, grease and oil and contaminated chocks are removed by dipping in Methyl Chloride solvent. It is resistant to shocks so there is no chance of damage while installing and transiting. Very lowest cost product comparatively then by any other sintered production It is available in three different Microns 5, 25,50. Application on various end uses: Filtration of air compressor and air dryer Standard size of cartridges 70mm OD X 40mm ID X 500mm Long (Extended according to your desired Length). Air regulators Biomedical, Water conditioning Blood serum Industrial, Fuel filters Aquarium Aerators Breather vents Marker tip Controlled metering devices Foaming devices Pneumatic mufflers Filtration support media Oxygen humidifiers Battery flame arrestors ETO vents Chromatography frits Production of defined foams

• Diameter: 2.0 mm to 50 mm

POLYPORTM- Porous Plastic Filter Material of Polypropylene, PTFE, HDPE, Cellulose Acetate, and Polystyrene ranges from 5 to 250 microns. Form of rods, hollow pipes, sheets and joined parts of porous with a non-porous plastic and can be moulded as per your drawing and dimension.

These are highly efficient and robust Filter Units, suitable for most general plating solution with the exception of CHROME. The Unit consists normally of a Motor driven polypropylene pump with a mechanical seal or a Magnetic Drive Sealless pump, connected to a Filter chamber made of Polypropylene or M.S. lined with PPGL and containing a Filter Stack. The Filter Stack comprises a S.S. 316 or P.P. central pipe, a set of P.P. Filter Discs with Filter Cloth and Filter paper. The Filter Stack is easily removable from the chamber and needs to be cleaned regularly. A pressure gauge is provided, which indicates when the stack requires cleaning. The whole unit (excepting mini unit) is mounted on a trolley for easy movement. The unit is suitable for acid and alkaline solutions having temperature upto 70 degree centigrade. Activated carbon or Filter aids can be used in these Filter Units. The filter unit is provided with Suction and Delivery hoses.

• Material: SS
• Efficiency: 99.99% down to 0.3 Microns
• Automation Grade: Automatic
• Voltage (V): 220 V
• Power Source: Electric

We are offering filter cages. Ms, gi - ms, ss304 and ss316 cages with high precision

• Size: Multisize
• Type: Stainless Steel Filter Disc
• Material: Stainless Steel
• Shape: Round
• Application: Filter Disc
• Color: Black, Grey, Silver
• Feature: Anti Corrosive, Durable, Eco-Friendly, High Quality, Shiny Look
• Finishing: Non Polished, Polished

• Technical Details: Raw material: cotton, blends, synthetic Application: for traditional textiles and nonwovens.
• Features: Consistently high humidity of the material for optimal processing Conditioned air - correctly Etc.

Manufacturers look for machines that do not occupy much space while enhancing efficiency and quality. Having understood these requirements, Luwa offers Rotary Pre-filter units designed to save space while providing clean air and maintaining the optimal temperature and humidity levels in the manufacturing unit without compromising on safety or hygiene of it.

The Air Filter Cages that are offered by us can be customized in terms of shape and size according the needs and requirements of each individual client. They have been manufactured using nothing less than the best materials that are available today. These Air Filter Cages find wide applications in air pollution control systems. These are available with us at affordable and highly competitive rates.

We provide accessories, spares, maintenance, and refurbishing services for all Filters and Filter components including: Manufacturing and supply of new Filter Leaf sets for all sizes and models of Vertical and Horizontal Pressure Leaf Filters Stocking of spares for all Filters including Filter Bags, Pneumatic Vibrators, Valves, consumables, etc. for ready delivery Repair and refurbishing of Filter Housings, Filter Leafs, and other filter components

Ace is one of the leading centrifuge manufacturers in India with an impressive track record in meeting customer needs. Maintaining the highest quality standards and constant innovation have been the hallmarks of our enterprise. All our products are guaranteed against defective materials and workman-ship for a period of one year. The company manufactures both 3-point and 4-point centrifuges from 12” to 72” dia. in various materials of construction.

filter aids, cooking oil stabilizers, fried snacks, Potato Wafers

We Manufacture Multi Mill  Sieves as per customer requirement. The Sieves are made of SS 316 or SS 304 as per requirement of the customer.