Filters Dealers in Midc, Mumbai

The company is located in Mumbai(India) and affirms to offer the entire array of products to every nook and corner. Purchasers will not be disappointed buying our range of product, as it adheres to industrial quality regulation systems.

A Vertical Pressure Leaf Filter consists of a hermetically sealed tank with vertical filter leaves mounted on a central manifold at the bottom Each filter leaf is made from 5 layers of wire mesh – 2 outer filtering layers and 3 inner support layers Vertical Pressure Leaf Filters are used for filtration of liquids with ~7% suspended solids:     A Vertical Pressure Leaf Filter consists of a hermetically sealed tank with vertical filter leaves mounted on a central manifold at the bottom Each filter leaf is made from 5 layers of wire mesh – 2 outer filtering layers and 3 inner support layers Outer layers of fine wire mesh are selected depending on the application - these act as the primary filtering elements and eliminate the need for filter cloth Inner layers of coarser mesh support the outer layers and serve to collect and discharge the filtrate Filter cake is discharged from the bottom of the filter using a pneumatic vibrator to shake the leaves Cake discharge outlet is provided with a Butterfly valve that can be pneumatically controlled from a remote location, or with a wedge lock full opening valve with heel leaf Vertical Pressure Leaf Filters are self cleaning and simple to operate without need for repeated opening of the filter body The entire filtration cycle can be easily automated by using a PLC to switch between the priming, filtration, and cleaning steps at regularly timed intervals or based on pressure readings inside the filter Applications Major application of Pressure Leaf Filters is in the filtration of Catalysts, Carbon black, and Bleaching earth in Edible oil processing, Crude oil Bleaching and Post-bleaching, Hydrogenation, Winterisation, and Fractionation Applications in the chemical and process industry include Aluminates, Fatty Acids, Sulphur, Mining, Brine, Resins, Ni Catalyst, and Electrolytes MOC Filtering Mesh is manufactured from SS316L, while the inner meshes and collecting channels of the leaves are manufactured from SS304 The housing and support elements can be manufactured from Carbon Steel, SS304, Monel, Inconel, Carbon Steel, etc. based on customer specifications Filters can be provided special linings such as SS304/ SS316L for food grade processes, e.g. in Vegetable Oil refining

we are offering centrifuge filters.

Sharplex Candle Filter consists of candle shaped filter elements made out of Equi-Diameter pipes. Each candle is covered with filter hose in polypropylene, Polyester, Nylon, PVDF and PTFE. These candle are arranged vertically in a pressure vessel. Number of candles depends on filtration area of filter. Filtration & cake formation takes place under the pressure. Wet or dry discharge is possible by means of blow back. For continuous operation two filters are installed. Candle in PP, PVDF also available for corrosive application.   Applications Catalyst Filtration Activated carbon filtration Polyols Edible oil Pesticides Biodiesel Beverage Industry Brine Filtration Amine Filtration PTA Filtration

  The Indoor Unit is ideal for small offices, houses, retail outlets, hospitals and clinics. The unit makes up to 20 liters per day in relative humidity of 50%. The unit is also equipped to use city water as the input source to deal with a sudden increase in demand. The superior filter system in this unit ensures that the dispensed water is filtered through a three stage filter i.e. carbon , sediment and ultra filter, thus removing all unwanted particles, odor and delivering pure water with less than 0.02 micron partial. With recent advanced technologies like ozonation, the water is treated with ozone to kill all the harmful bacteria and viruses to produce pure & safe drinking water. Features:  Water Filtration system:Carbon, Sediment, Ultra Filter, Ozonation    Size: W 450 x L 450 x H 1250 mm.  Dispensing: Mechanical dispensing system  Water Flow from the collection tank: Sediment filter, Carbon filter 1, Reverse Osmosis, Carbon filter 2, then the 1st UV Light.  Noise: Less than 60 decibels  Facia: Plastic or metal options  Water Storage: 20 liters (10 liters – Purified water + 10 liters -Collected water)  Cooling: Cold water up to 6°C

Magnetic Filters are used for filtration of iron particles from products in liquid/slurry form. They are essentially used in chemical, food, pharma and oil industries. They are also frequently used in hydraulic circuits in cooling systems. The Filter Magnets are made up of either Ceramic or High Intensity Rare Earth Magnets.

Two Stage Transformer Oil Filtration Plant, offered by us, is suitable for degassing, dehydration and filtration of transformer oil under vacuum and achieve oil test results as per I.S standards. It basically works on heating, filtration and vacuum treatment. Our Transformer Oil Filtration Plant has flow rates ranging from 300 LPH to 12000 LPH. We manufacture different models of Transformer Oil Filtration Plant as per the requirements specified by the buyers. We offer Transformer Oil Filtration Plant for on-site filtration, castor mounted for factory and site filtration and stationery for filtration of collected oil. Optional items such as ionic reaction column (for acidity correction), Spirafuge for coarse separation, transformer evacuation system can also be offered with the product.

The Replaceable Series molded core is composite of carefully selected desiccant materials, artfullyblended with a low content binder.

Detuned Filter Reactors are used in series with capacitor banks in power factor correction units. By using these types of detuned reactors it is possible to avoid the following negative effects on the system: Overcurrent during switching on the capacitor banks Incidental resonance of Capacitors along with stray inductance

We are engaged in offering a precision engineered range of zero hold up filter press machine & sparkler filter press manufacturer using quality raw material such as S.S. 304S.S. 316. Our range is available in various models as per the clients’ requirements. Gives crystal clear filtration by filtering particles up to 1 micron size. Inbuilt back wash facility eliminates time loss, gives more output with continuous operation. Scavenger arrangement to remove all the liquid filter press machine.

CATALYST FILTERS FOR HYDROGENATORS AND AUTOCLAVES Catalyst filtration is an important aspect of a Hydrogenation system. Omega- Kemix supplies a cost effective system, which incorporates. Complete filtration Operational safety Full backwash Minimal holdup of the reaction mass The filter is Fitted with sintered candles Has a special Heel filter Provided with a sight flow indicator Provided with special valves for effective dislodgement of catalyst cake Omega-Kemix make filter has the following advantages Safe procedure for catalyst filtration from the Autoclave There is no spillage of expensive catalyst Closed circuit operation avoids fire hazards in case of pyophoric catalysts High efficiency candles result in very low losses, which are often below measurable limits The filtration system pays for itself through high rate of catalyst recovery CATALYST FILTERS FOR HYDROGENATORS AND AUTOCLAVES: Catalyst filtration is an important aspect of a Hydrogenation system. Omega ‐ Kemix supplies a cost effective system, which incorporates complete filtration, operational safety, full backwash, as well as minimal holdup of the reaction mass. OPERATING PRINCIPLE AND PROCEDURE: At the completion of hydrogenation reaction, balance Hydrogen gas in reactor headspace is vented, and the Reactor is purged with Nitrogen, to eliminate all traces of remaining Hydrogen. Subsequently, the Reactor is pressurized to about 1 bar with Nitrogen, through Valve V1 Valves V2, V3 and V4 are opened. All othe valves (V5 to V8) are in closed position. Nitrogen is continuously fed through Valve V1, so that Reactor pressure is maintained around 1 bar. Typically, if the catalyst is noble metal on a carrier, e.g., Pd/C, the entire mass is filtered. In this case, it is advisable to stir the reaction mass at around 50 RPM, and the dip pipe or blow leg should extend to the lowest possible point in the Reactor. For heavy metal catalysts like Raney Nickel, the bulk of the catalyst settles within a very short time, typically 30 minutes after cessation of stirring. In this case, a common practice is to filter the supernatant liquid (through a dip pipe terminating just below the lower tan line of the Reactor). Nitrogen pressure in the Reactor headspace forces the liquid‐catalyst slurry into the Main Filter through Valve V₃. This filter is fitted with sintered SS 316 L candles, suspended from a tubesheet. These candles also have a 0.2 micron thick vapor deposited Stainless Steel membrane, of the desired micron size, typically 1 to 3 μ. Initially, the Filter body fills up with Liquid‐catalyst slurry. When it is full, filtration commences. Catalyst cake accumulates outside the candles. Clear filtrate enters the candles, and flows out through Valve V4. Filtrate flow can be observed through Sight Flow Indicator (FI). Once the Reactor contents are entirely displaced by Nitrogen, gas will flow into the Filter through V3. The Filter Candles are fitted with an inner Siphon Tube. Gas entering the Filter displaces the slurry, so that clear liquid is siphoned out through Valve V4, due to action of siphon tubes in the candles. Due to this action, slurr level in the Filter falls to the lower end of the candles. In effect, the filter cone and lower parts are full of unfiltered slurry (also known as "Heel"), and candles are coated with wet cake. At this point, only gas flows through the Sight Flow Indicator. A Zero Holdup Filter is fitted at the lower end of the Main Filter, below the conical portion. This is a Jacketed Sintered pipe (or Lower Candle), around 125 mm inside diameter, suitable for inside to outside filtration. The sintered pipe has a similar 0.2 micron thick vapor deposited Stainless Steel membrane on the inside, to facilitate surface filtration. Please refer Drawing 2 for details of the Zero Holdup Filter. When gas flow (i.e., no liquid flow) is observed through the Sight Flow indicator as described above, Valve V4is closed, and V₉ is opened. Nitrogen gas entering the Filter cone forces filtrate through the Lower Candle, so that slurry in the Filter Cone and lower parts is filtered through the Zero Holdup Filter. Heel filtrate is observed flowing through the Sight Flow Indicator FI. Once the entire heel slurry is filtered, no further liquid flow is observed through the Sight Flow Indicator. All the slurry has been filtered. At this stage, outer surfaces of the upper candles, and inner surface of the lower candle are covered with wet cake. Valves V9, V3 and V2 and V1 are now closed, and the Reacto vented to atmospheric pressure, by opening Valve V10. Solvent/feed for the next batch, or Nitrogen at 1 to 5 bar is introduced at Valve V5, located at the top of the Filter. Keeping Valve V10 open, Valve V8 and then Valve V6 is opened, so that catalyst adhering to candle surfaces gets back‐flushed into the Reactor. For best results, Valve V6 should be a Solenoid operated ball valve, so that there is a pressure pulse while opening this valve. This ensures effective dislodgement of catalyst cake from the Candles. This procedure ensures a safe procedure for catalyst filtration from the Autoclave. There is no spillage of expensive catalyst. The closed circuit operation avoids fire hazards, as many catalysts are pyrophoric, and can spontaneously ignite when exposed to air. High efficiency candles result in very low losses, which are often below measurable limits. The filtration system pays for itself. After several batch cycles, it may be necessary to remove catalyst from the system, and send it for disposal or regeneration. In this case, Valve V7 is opened instead of V8, during back flushing operation, and spent catalyst collected in the Recycle Drum.

• Usage: Liquid Filter,Centrifuge Filter Bags,solid-liquid separation
• Type: Mesh Filter Bag
• Pay Mode Terms: T/T (Bank Transfer)
• Dimension(L*W*H): 330x330x690MM

We among the most trusted firms, indulge in manufacturing, supplying and exporting Sparkler Filter Press. Used in several industries like automobile, automotive and textile, these products are made using quality material and latest technology. Our Sparkler Filter Press is also thoroughly checked by expert quality controllers on various parameters to ensure flawlessness. We further conduct regular researches for improvising these products. Working :The liquid is directed with the help of pumps through the centre channel of the cartridge from the bottom of the body. Suspended particles get retained on the fitter medium resting on the filter plates and the clear filtrate emerges from the side holes of the plates inside the tank and flows out from the bottom outlet. The filter tank does not come into contact with the liquids and hence remains clean. The cake filtrates and solids remain completely inside the fully closed filter plate cartridge. Complete recovery of the filtrate is possible by passing of air or an inert gas through the bottom inlet to dry the cakes and get a clean empty tank.   Features: • Enclosed construction.• Cake holding capacity.• High production rate.   Further Details : • Available in variety of plate size options.• Comes with horizontal filter plate.• Deliver optimum filtrate quality.• Enclosed construction.• Has large cake holding capacity.    SALIENT FEATURES:• Maintenance can be easily carried out just by lifting the dome i.e., without lifting the cartridge.• Quick and easy removal of filter plate cartridge for cleaning of cake.• Filtrate is obtained without scavenging agents.• Liquid does not remain between the tank or the cartridge.• Possibility of high working pressure.• Uniform distribution of cake and filtrate.

Principle of Operation   Liquid is pumped through the central channel of the cartridge from the bottom of the body. Suspended particles are retained on the filter media resting on the filter plate. Clean filtrate emerges out from the peripheral holes of the plate, into the tank and comes out from the bottom outlet. Filter tank wall does not come in contact with the un-filtered liquid, hence remains clean.     Feature of Reverse Flow Model     Zero Hold Up of filtrate with out scavenging operation. Tank does not come in contact with unfiltered liquid, hence remains clean. Fast & easy removal of filter plate cartridge due to top dome design. Hence easy removal of cake.Uniform filter cake & aid distribution. Higher working pressure possible.     Horizontal Plate Sparkler Filters     The horizontal sparkler type filter is the most versatile filtration system for solid – liquid separation. It can also be used apart from filtration, with the help of filter aids for giving a sparkling effect to the liquids filtered. The filters are most suited for the filtration of products for the pharmaceutical, chemical, distillery, beverage, ink, oil and other allied industries. It is available in different output capacities with a variety of pumps to suit individual requirements. Horizontal Plate Sparkler Filters:- horizontal sparkler type filter is the most versatile filtration system for solid – liquid separation and available in different output capacities.   Horizontal Plate Sparkler Filters   Construction The filters are made out of Stainless steel in S.S. 304, 316 & 316 L qualities. The cartridge assembly consists of a number of disc type filter plates with perforated support screen, filter media and interlocking cups placed one on top of the other and supported at the bottom by a cartridge plate. The entire assembly is held together with the help of side tie rods which are of ‘T’ type construction for longer life. The filter together with the pump and interconnecting piping is mounted on a sturdy base cladded with S.S. sheets and provided with castors for movability. The filter can also be supplied without pump, where external positive pressure is available.     Operation         The liquid to be filtered is passed into the vessel by means of the pump or other external means. The liquid then passes through the top of the filter plates from the holes provided at the side of the plate and onto the filter media. The liquid flows simultaneously and individually through all the member plates. Hence the output of the filter depends on the diameter and the number of plates. The filter media then retains the impurities in the liquid and the filtered liquid passes through the central channel to the outlet at the bottom. The filters are optionally available with steam jacket for filtration of difficult liquids that solidifies at lower temperatures. These types of filters are generally used for obtaining clear filtrate, but it can also be used to obtain the cake that is retained on the filter media, between the plates.   Salient Features     The complete filter plate is manufactured by cold process. The sealing of the filter plate is done by the spinning process for better sealing. The cartridge assembly is provided with ‘T’ type side bolts for longer life. The filters are provided with gear/centrifugal/lobe pumps fitted with mechanical seals as per requirement.  Optionally available with steam jacket for heating of liquids at the time of filtration.       Scavenging Operation   The unfiltered liquid remaining inside the shell at the end of filtration can be filtered by scavenging operation, opening the single plate valve and applying pressure from the vent using compressed air or nitrogen / inert gas, so that even the last drop of unfiltered liquid passes through the bottom plate. It is available in 14” & 18” Dia models as a standard and can be provided in 33” Dia model on request.    

Candle Filter is a cylindrical shape filtering element mainly arranged vertically for handling applications that require efficient low moisture cake filtration or high degree of polishing.  

• Type: 0 - Woven
• Material: Stainless Steel
• Length: 0 - 20 inch
• Hole Shape: Square, Diamond, Hexagonal
• Layers: 1 to 8 layers
• Features of Metal Mesh Filter: Supreme Strength, Thrifty prices , Superior quality

We are one of the renowned and reliable manufacturers, supplier, stockist and exporter of Metal mesh filter in Mumbai, India.   Considering our enormous experience and knowledge in this domain, we are well known for offering Metal Mesh Filter. These metal mesh filter are made by using supreme quality raw materials and state-of-art technologies under the monitor of adroit professionals. Our offered Metal Mesh Filter is blending with attributes like high performance, low maintenance, and long durability.   Types of Metal Mesh Filter : Filter mesh types are according to its material used and weave type Popular types of Metal mesh Filter i.e. Stainless Steel Metal mesh Filter, 1 to 8 layer metal mesh filter, Square Metal mesh Filter, Diamond Shape Metal mesh Filter, Hexagonal Metal mesh filter, Woven Metal Mesh Filter.

• Size: Customize
• Type: Cooling Tower Parts, Filtration
• Material: Metal, Stainless Steel
• Certification: ISO 9001:2008 Certified
• Application: Water Treatment
• Weight: TON
• Color: Black, Green, Red
• Condition: New
• Surface Finishing: Polished
• Country of Origin: India
• Flow Rate: 5 m3/hr to 750 m3/hr

• Type: Drawing Paper
• Country of Origin: India
• Brand Name: Sundaram
• Size: 21 x 29.7 Cms
• Product Name: Cartridge Drawing Paper
• Number of Pages: 40
• Inner Package: 1
• Outer Package: 100
• HSN Code: 48025720
• GST: 12%

• Material: Glass
• Country of Origin: India
• Capacity: 20 - 30 ml
• Application: Lab Research
• Is It With Copper Base: With Copper Base
• Width: 20.5cm

• Type: Air Compressor, Air Compressor Filter
• Color: Blue
• Feature: High Performance, Low Maintenance, Stable Performance
• Condition: New
• Power Source: Electric
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Warranty: 1Year
• Configuration: Air Compressor
• Flow Rating: 18 - 1589 Cfm
• Country of Origin: India
• Brand Name: CompAir
• Max Pressure: 250 Psi

• Diameter: Custom
• Packaging Type: Wooden Box
• Overall Height: Custom
• Particle Size: 100 Micron
• Pore Size: 0.22
• Filter Length: 10 Inch
• Overall Weight: 5000
• Filtration Capacity: 10 Microns
• Usage: Textile Industry, Pharma Industry, Air Filter
• Specialities: Hassle-Free Functioning, Ease Of Install, High Quality, Durable
• Flow Capacity Range: Any
• Filter Thickness: 50cm
• Filter Dimensions: 70X70X60cm
• Type: Cartridge Filter
• Brand Name: Deepti
• Material: Stainless Steel
• Shape: Rectangular
• Certification: ISO 9001:2008
• Color: Customised
• Voltage: 440V
• Condition: New
• Finishing: Powder Coated
• Power: 25Kw
• Motor Power: 2HP
• Warranty: 2 Year
• Country of Origin: India
• Corrosion Resistance: Yes
• Operating Type: Automatic
• Is It Washable: Yes

• Application: Power, Fertilizer, Chemicals, Petrochemicals
• Material: Mild Steel, Carbon Steel, Stainless Steel

• Material: Stainless Steel
• Shape: Rectangular
• Thickness: 0-50cm
• Application: Industrial
• Warranty: 1yr
• Flow Range: 0-200cfm

• Operating Temperature: 1.5
• Efficiency: 99%
• Operating Pressure: 16 bar
• Porosity: 3 um

• Pattern: Plain
• Application: Laboratory
• Thickness: 0.25mm
• Material: Paper
• Type: Filter Paper
• Brand Name: Whatman
• Diameter: 10-12inch