Fin Tubes Dealers in Mumbai

• Brand Name: Indigo
• Type: Finned Tubes
• Place Of Origin: Umbergaon, Gujarat
• Variety: Copper, cupro-nickel ,admiralty brass, aluminium-brass, aluminium, etc.
• Height: From 0.889 mm up to 4.00 mm
• Maximum Length: 20 meters

We are offering copper alloys finned tubes.  turbo chill tubes in straight form are available in various metals like: copper, cupro-nickel (70:30, 90:10), admiralty brass, aluminium-brass, aluminium, etc.  turbo chill tubes in straight form are manufactured out of: 15.875 mm and 19.05 mm od tubes. width: 1) 11 fins per inch (fpi), 13 fpi,14 fpi, 15 fpi, 16 fpi, 19 fpi, 23 fpi, 26 fpi, 28 fpi, 30 fpi & 40 fpi, having fin height ranging from 0.889 mm up to 4.00 mm. 2) turbo-chill tubes can be manufactured up to a maximum length of 20 meters, with any number of intermediate landings (plain portion) for baffle supports, in addition to side landings. indigo metalloys specializes in the production of various types of finned tubes applicable in heating or cooling transfer systems.  we have gained great reputation from our clients due to our stringent quality control standards and constant product innovations.  finned tubes are available in straight length with plain end on both sides and also available with interim skip, as per requirement.  fin tubes get improved heat transfer over plain tubes, thus allowing reduction in size and weight of the heat exchanger and condensers.

Low fin tubes are formed by passing the tube through a set of rollers which forms the fins from the parent material of the tube by making it flow in the desired way.

We are a prominent Manufacturers, Suppliers, and Exporters of Integral Finned Tubes. These Integral Finned Tubes come with superior dimension accurateness, sturdy construction, and fine finish. Integral Finned Tubes can improve the thermal performance of a heat exchanger without the changing shell size, flow arrangement or the repositioning of piping. We offer Integral Finned Tubes in different specifications to meet divergent demands of the clients.Integral Finned Tubes are suitable to be used in such applications where extended surface is required, but lack of space or heat exchanger type dictates otherwise. The external surface of the Integral Finned Tubes is enhanced by the formation of ''low fins'' by direct extrusion from the material of the base tube. Highlights : Smooth finish Accurate dimensions Sturdy construction Corrosion resistance surface Availability : Available materials are stainless steel (304L, 316L, 321(H), 304H, 310 etc.), duplex, copper alloys, nickel alloys, hastelloy and titanium Size range / Dimensions : Tube size : 12,7mm, 15,88mm, 19,05mm and 25,4mm Fins per inch : 16, 19, 26, 28, 30, 32, 36, 40 and 43 fins/inch dependant on material Qualities : Non-destructive eddy current examinationAir under water testingHydrostatic testing (with fluorescent dye)Fin profile examination at 50x magnificationDimensional & ring gage checks In specifying finned tubes you should advise : Number of finned tubes requiredOutside diameter of tubeTube thickness or thickness required under root of finLength of finned tubeNumber of fins per inchUnfinned endsSkipped portions and dimensions from one endMaterial of tube In specifying U-tubes you should advise : Tube diameter, thickness and materialStraight leg lengthCentre line radius (or diameter) and number off per rowWhether post bend heat treatment is requiredWhether hydraulic testing is required

• Size: 0-15mm
• Material: Metal
• Thickness: 0-5mm
• Application: Automobiles
• Color: Metallic
• Surface Finishing: Polished
• Feature: Accuracy Durable, Auto Reverse, Corrosion Resistance

Ours is one of the most respected names involved in the manufacturing, exporting and supplying of high quality Integral Finned Tubes. Made using high-grade raw materials, our Integral Finned Tubes are highly accredited for their optimum strength, dimensional accuracy, excellent finish, etc. Our Integral Finned Tubes are helpful in improving the thermal performance of heat exchangers without repositioning the pipes or changing shell size or flow arrangement. We make available these Integral Finned Tubes in different lengths and thicknesses. These are widely used in such applications where extended surface is required.   Highlights Smooth finish Accurate dimensions Sturdy construction Corrosion resistance surface. Availability : Available materials are stainless steel (304l, 316l, 321(h), 304h, 310, ), Duplex, Copper Alloys, Nickel alloys, Hastelloy and Titanium.Size range / Dimensions Tube size : 12,7mm, 15,88mm, 19,05mm and 25,4mm. Per inch : 16, 19, 26, 28, 30, 32, 36, 40 and 43 finsinch dependant on material Qualities Non-destructive eddy current examination. Air under water testing Hydrostatic testing (with fluorescent dye) Fin profile examination at 50x magnification Dimensional & ring gage checks In specifying finned tubes you should advise Number of finned tubes required Outside diameter of tube Tube thickness or thickness required under root of fin Length of finned tube Number of fins per inch Unfinned ends Skipped portions and dimensions from one end Material of tube   Norms - ASME pressure vessel code Sec.8, UG-8 and Div. 1 appendix 23 ASTM B891 : Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes With Integral Fins ASTM A1012 : Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser And Heat Exchanger Tubes with Integral Fins ASTM B924 : Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins ASTM A498 : Standard Specification for Seamless and Welded Carbon, Ferritic and Austenitic Alloy Steel Heat Exchanger Tubes with Integral Fins ASTM B359 : Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins

Copper finned tubes Instead of smooth tubes. The corrugation generates high turbulence in Media, Vastly enhancing Heat Transfer co-efficient for a given Reynolds number. Copper & Cupro Nickel Fin tubes offers more surface area compared to plain tubes& increases heat exchange capacity of the tubes. Fin tubes are manufactured as per the customer’s specific requirements. We have the skill & necessary know-how for the production of integrated fin tubes & can manufacture the same as per your requirements.

We are an esteemed manufacturer, exporter and supplier of Supreme quality Copper Alloy Fin Tubes from Mumbai, Maharashtra. We offer Low finned Tubes and Enhanced Surface Finned Tubes with 19 & 26 fins per inch respectively. The products comprises of alloys of Alloys Copper, Copper, Nickel 95/5, 90/10, 70/30 Admiralty Brass Aluminum Brass. Available with Quality Control Chemical analysis as per specifications, these Copper Alloy Fin tubes are used in Heat Exchangers, Condensers & Chillers Condensers and General Heat Exchanging Units. As one of the reputed suppliers of this industry, we undertake bulk orders also.

Fins are basically external surfaces on tube for increasing the surface area of the bare tube, resulting in a compact Heat Exchanger.  The method of attaching the fins over tube is of prime importance, since even a slightest air gap between the tube and fins will defeat the whole purpose of fins over the tube. Considering the above facts Heft has indigenously designed and developed a special purpose tube fining machine capable of producing following types of finned tubes. HEFT was formed in 1994 to provide the service to petrochemicals, power generation, chemicals, pharmaceuticals industries with high quality HELICAL WOUND FINNED HEAT EXCHANGERS tubing used in the maintenance and manufacture of the air cooled heat exchangers, air heaters & other related heat exchangers. Finned tubes are able to even out the heat transfer between the inside of the tube and the outside. When the heat transfer coefficient on the outside of the tube is significantly lower than the heat transfer coefficient on the inside of the tube, there is a major advantage to incorporate fins on the outside tube surface to take full advantage of the high heat transfer rate on the inside of the tube. By using a finned tube with eight times as much surface on the outside of the tube, the total length of the tube required for heating the viscous oil can be reduced by one sixth, Fins are basically external surface on tube for increasing the surface area of the bare tube, resulting in a compact heat exchanger. 

Copper Fin Tubes are produced using high quality copper alloy. These Copper Fin Tubes are offered in different dimensions as per the client’s specifications. We are a premier Manufacturer and Exporter of Copper Fin Tubes from India. Advantages : High flexibilityConsumes less energyEasy to installEasy joining Used in : Air conditioningRefrigerationFluid distributionAir pressure linesPlumbing Technical Specifications: Finned Tubes -Intergroove Integrally Finned TubesNo. of startsTriple startNo. of fins/ inch19 & 26Type of finLow & highPlacement of finsOD or ID or OD + IDDia19.05mm & 15.77mmWall 16SWG, 17SWG, 17.5SWG & 18SWGLength6 MTRSLandsAs per customer needs

We are dealing in wire wound fin tubes, Wire wound turbulators are excellent tube heat transfer enhancement devices that increase the tube side heat transfer coefficient several fold at not too high pressure losses. Wire wound fin tubes for use in air cooled oil coolers are provided with internal fins selected from wide variations in configuration. We also manufacture double pipe wire wound fin tubes for use in refrigerated air dryers and heat exchangers for viscous and small streams.

Tube Tech is well equipped to manufacture integral finned U - Bent tubes, fabricated according to various heat exchanger standards or to customer's own specifications. We generally produce Finned U Bent Tubes in outer diameters 15.9 mm & 19.05 mm with wall thickness 1.32 mm and above. However, bigger sizes can also be accommodated on request. Bending radius of 1.25 X Diameter and above can be achieved on these integrally finned tubes. The Bend portion is left unfinned during finning operation to accommodate bending operation. The Finned U Tubes are produced, controlled and measured in accordance with SB 395 & TEMA standards. We are capable of producing Finned U Bent Tubes in the Leg Length of up to 5 mtrs. These Finned U Tubes are hydro tested after fabrication against any surface defects / leakages. We have in house stress relieving facility and these tubes can be heat treated for stress relieving, if required by the Customer. All tubes are cut to the specified leg lenght, ends deburred and the bores are internally cleaned with dried air before final inspection & packing. Each bundle is protected with plastic sheets. Detailed packing lists are attached to boxes to give quick and clear identification of contents.

These tubes are manufactured using wire in place of strip and wound helically over the tube with root soldering at foot to avoid air gaps between fin and the tube resulting in to higher heat transfer efficiency, reliability and longer service tube.

• Material: Carbon Steel
• Application: Construction
• Shape: Round
• Nominal Pipe Size: 6 meter
• Appearance: Modern
• Finish: Polished

• Hallow Sections: Circular
• Tube Range: 12.77mm OD to 25.4mm OD
• Features: Highly suitable for use in heat exchangers, Optimum tubing designs, Stress resistant
• No. of Fins/inch: 11 to 26

unraj Industries Exports wire wound Fin Tubes or Turbulators made of loops of wire wound helically on a central rod or tube and soldered to the inner surface of the tube. The internal turbulators are made of stainless steels, copper and galvanized steel wire. Sunraj make wire wound turbulators for tubes of inner diameter as low as 8 mm. There being no limit on higher diameters and lengths.Wire wound turbulators are excellent tube heat transfer enhancement devices that increase the tube side heat transfer coefficient several fold at not too high pressure losses. Wire wound fin tubes for use in air cooled oil coolers are provided with internal fins selected from wide variations in configuration. We also manufacture double pipe wire wound fin tubes for use in refrigerated air dryers and heat exchangers for viscous and small streams. Wire wound fin tubes can withstand temperature up to 180ºC with standard solder wire. However for high temperature application it can withstand temperature up to 290ºC. This is with the use of special silver content solder wire.Wire wounded tubes can be manufactured by using various base tube material such as Carbon Steel, Copper, Cupro—Nickel, Brass and Alu. / Adm. Brass, Stainless Steel with fins of Copper, SS 304, SS 316, C.S & G.I

• Type: Fin Tube
• Certification: "U"and R"Stamps, TUV Stamp
• Packaging Details: Wooden Packing , Crate Packing
• Supply Ability: Custom Built
• Brand Name: EMHT

• Features: Easy to fix, Low maintenance, Excellent performance, Long working life, Safe installations

We are offering premium quality Copper Finned Tubes to the clients. The Copper Finned Tube is an integral extended surface tube having helical fins on the outside. The Copper Finned Tubes offered by us are designed primarily for Shell and Tube heat Exchanger application, for increasing the efficiency and reducing the case. The Copper Finned Tubes are available in variety of combination like copper finned tube over a steel liner, Admiralty finned tube over cupro-nickel liner, Aluminum finned tube over an admiralty liner, etc. Available In Helical Fins192640CombinationsCopper finned tube over a steel linerAdmiralty finned tube over Cupro-Nickel linerAluminium finned tube over an Admiralty liner »Chemical Requirement No. of startsTriple startNo. of fins/ inch19 & 26Type of finLow & highPlacement of finsOD or ID or OD IDDia19.05mm & 15.77mmWall 16SWG, 17SWG, 17.5SWG & 18SWGLengthUp to 6 MTRS

• Thickness: 1.6mm to 1.2mm
• Application: ACR, Heat Exchangers, Naval Industries
• Type: Intergroove integrally Finned Tubes Internally Grooved Tubed, Outer Grooved Finned Tubes, Sprial Finned tubes.
• Sizes: 5/8 “ (15.8mm) OD & 3/4 “(19.044mm) OD(19/26 finns per inch) Length : Specific length or up to 10 mtr.
• Temper  : HH

We hold expertise in offering a gamut of copper finned tubes, which are widely used in API heat exchangers.Manufactured using premium quality raw material such as copper, our copper finned tubes is available in various sizes. Our tubes are used ideal for heat exchanging in commercial units for cooling and heating of liquid and gas, including water, oil, steam and air as well as for condensation, evaporation and others. Copper Finned Tube Application in Refrigeration HVAC System Gas Line Air Conditioning Condenser Heat Exchange Cooler Freezer Medical Purpose Sugar Industry General Engineering Power Plants Refineries Ship Building & Ship Repairs Evaporators Copper Coil Application in Furniture  

We are offering finned tube.tubes for boiler and economiser, with ms/ss fins attached, ibr approved.

• Range: OD 9.52 TO 19.05 mm
• Thickness: 0.7 to 1.6 mm
• Application: Industrial Heat Exchangers, Chillers, Condensers, Cooling System

• Brand: MBMTUBES
• Country of Origin: Made in India
• Material: Carbon Steel, Stainless Steel, Aluminium, Copper, Brass, Cupronickle
• Size/Dimension: 5/8" 0.D to 4" 0.D
• Type: Crimped Type
• Integral / Low Fin: 5/8" 0.D to 1" 0.D tube length upto 30 feet long
• Material Grade: 304 | 304L | 316 | 316L | 316TI | 904L | 321 | 347H | 310S | 317L
• Fin height: 2mm to 40mm
• No. of fin/in: 2 to 12 FPI
• Thickness of tube: 14 SWG | BWG to 20 SWG | BWG
• Number of Fin/Inch: 11 FPI, 19 FPI, 26 FPI
• Fin thickness: 0.2 mm to 2.5mm

We have our fining capacity for manufacture of “L” and “G” fined tubes of upto 40 ft long. Aluminium fins are mechanically bonded to tubes provides more surface area for heat transfer. Aluminium has low cost, less weight & good thermal conductivity compared to other metals hence now a days these tubes are taking place of conventional copper finned tubes. For more details contact us:- Enginemates Heat Transfer Pvt Ltd. Contact:- 91 22 25919293/94/95

integrally finned tubes by low finning / integral fin tube: type low fin:integral low fin tube for use in situations where extended surface is required, but lack of space or heat exchanger type dictates otherwise.available materials are stainless steel (304l, 316l, 321(h), 304h, 310, …), duplex, copper alloys, nickel alloys, hastelloy and titaniumintegral low fin tube has the advantage that it can improve the thermal performance of a heat exchanger without the necessity for changing shell size, flow arrangement or the repositioning of piping. finned heat exchanger bundle the external surface of the tube is increased by the formation of ''low fins'' by direct extrusion from the material of the base tube.size range / dimensions:- tube size: 12,7mm, 15,88mm, 19,05mm and 25,4mm- fins per inch: 16, 19, 26, 28, 30, 32, 36, 40 and 43 fins/inch dependant on material quality test capabilities :- non-destructive eddy current examination- air under water testing- hydrostatic testing (with fluorescent dye)- fin profile examination at 50x magnification            - dimensional & ring gage checks . .

We are offering spiral finned tubes. While it is not necessary to tell engineers what finned tubes are, or that their use is mandatory in cases of gas-liquid heat exchange where the film coefficient ratio is above 2, it is essential to tell the engineers that m.j.patel's finned tubes are backed by not only engineering excellence of manufacture, but also by our zealously guarded reputation for the finest quality of all our products.

• Unit Length: 12 m
• Hallow Sections: Circular
• Tube Dia: 12.70-19.05 mm
• Wall Thickness: 1.24-2.11 mm
• Features: Resistance to vibration, Sturdy construction, Excellent heat transfer

Amardeep steel centre is into supply & export of copper & copper alloys, aluminum, carbon steel, low alloy steel, high corrosion resistant alloy steel, ferritic & austentic stainless steel, nickel, titanium & other non-ferrous metal finned tubes. Amardeep steel centre is into supply & export of copper & copper alloys, aluminum, carbon steel, low alloy steel, high corrosion resistant alloy steel, ferritic & austentic stainless steel, nickel, titanium & other non-ferrous metal finned tubes.