Fire Extinguisher Spare Parts Dealers in Ghatkopar, Mumbai

• Model: SE FB 5X
• Range Mtrs (at 7 bars inlet pressure: 20
• Nominal Expansion: 1:10
• Lenght mm: 775

SE Low Expansion Jet Spray type Foam Branches give the operator the option of projecting foam in the form of a jet (to tackle fires from a distance) or Spray (for quick coverage of spills, etc). Ideal for use with AFFF in aircraft crash situations and areas where flammable liquid spill occurrences are likely. Available with nominal foam solution capacity of 450 lpm (FB 10X JS) at 7 bars pressure.

Fire Extinguishers (ABC Dry Powder Fire Extinguisher) are specially designed for high performance and to achieve rapid Fire knock down capability for protection of light ordinary and high Hazards. These compact and portable extinguishers are suited for industrial, commercial and Domestic Fire protection needs.

The Flame arrester protect storage, distribution and chemical process facilities containing Flammable gasses from fire and explosions. It is an effective device that isolate source of ignition and allows vapour to flow freely in venting and collection system. The most effective method of quenching flame is to install these. Flame arrester either at the strategic point along with pipe work system or at end of pipe line where gas/vapour are being vented into atmosphere.

• Type: Ceramic Disc
• Material: Ceramic
• Application: BATTERY
• Weight: 0-50gm
• Color: White
• Condition: New
• Driven Type: Battery

introduction zero-maintenance batteries have revolutionized the lead battery industry. One of the key components is a special ceramic filter disc. These are porous discs with perfectly tailored pore size and porosity, press fitted into the cap. key functions: flame arresting:  in an event of sparking outside a battery, they prevent the propagation/ ingress of flame from outside to inside by the use of a matrix of uniform openings that are carefully constructed   to quench the flame. This provides an extinguishing barrier to the ignited flame. zero top-up: small & uniform pores along with the water repellent properties prevents depletion of electrolyte through the pores. venting: tailored pore size and pore volume ensures controlled venting of gases, heat developed especially during charging, preventing the build-up of gases that can otherwise lead to explosion.

Inlet Connection : 2 ½" Instantaneous Material : Aluminum Alloy Or Stainless Steel Working Pressure : 145 PSI Max. Foam Expansion : 8 to 10 times Foam Induction : Available with foam inductor   Description Flow @ 100 PSI Throw Range in Meters In Aluminium Alloy Construction 60 GPM 18 In Brass Construction 60 GPM 18

fire extinguisher spare parts, Fire Fighting Equipment

Powered by our years of market experience and domain knowledge, we are betrothed in presenting Fire Fighting Foam Equipment that is used for fire fighting purposes. This equipment is precisely designed and manufactured by making use of supreme grade raw material and latest technology under the strict guidance of our professionals. The offered Fire Fighting Foam Equipment is available in different sizes and shapes to fulfill varied needs of clients. Our clients can purchase this range of equipment from us at reasonable rates.   Features: Ruggedness Corrosion resistance Light weight Durability

Teleflo ‘In Line’ And ‘End Of Line’ Detonation Type And Deflagrations’ Type Flame Arrestors Or Arresters, Teleflo Spark Arrestors, Teleflo Emergency Vents, Teleflo Free Vent, Teleflo Breathers PVRV, Teleflo Vent Head Caps, Teleflo End Of Line Vents, Teleflo Flame Banks, Teleflo Flash Arrestors, Teleflo Gauge Hatch, Teleflo Slot Dipping Devices , Etc.OperationFlame Arrestors, detonation flame arrestors, detonation arrestors, flame detonation arrestors stop the propagation of a flame by absorbing and dissipating heat through the large surface area of the bank sheets. Ignited vapor attempting to pass through the arrestor is forced through small passages within the bank assembly. Heat is absorbed, lowering the temperature of the gas below its ignition point and quenching the flame. Flame Arresters are typically used in the chemical, petrochemical and pharmaceutical industries on applications such as storage tank facilities, flare stacks, incineration systems, storage tank roofs or digester convertor to prevent the propagation of confined and unconfined deflagrations. Detonation flame Arresters additionally stop the high pressures and velocities that can result in detonations. Incase of ignition of vapors  they burn harmlessly at the flame arrestor, preventing ignition of vapors  in the tank and subsequent explosion. Design FeaturesThe main benefits of the Teleflo Atmos®. detonation flame Arrestor, flame arrestors, detonation arrestors, flame detonation arrestors are derived from ifs unique element design. The large channel openings provide excellent pressure drop to flow and enhanced flow characteristics often resulting in reducing overall size and cost of both Flame arrestor and piping. In addition to this the less restrictive nature of the larger channel openings result in less clogging and easier cleaning - both important maintenance considerations. Finally the element enables higher operating pressures to be achieved. The 'Teleflo Atmos®' Flame Arrestor after extensive research has been certified and type tested by FCRI, B.V. and other government agencies, and has also received the most stringent approval for Flame Arrestors, incorporating extended burn time performance, and have acceptance with B.P.C.L, I.O.C.L, H.P.C.L, L & T , REL , RIL & B.H.E.L., and many chemical, pharmaceutical , power industries and petrochemical industries. Configuration'Teleflo Atmos®' Flame Arrestors are available for all common gas groupings to IEC or NEC codes, and supplied in range of sizes/materials/options; Net Free Area - three to four times, Bank Assembly - extensible and removable. Special "off-set" housing design is not affected by condensate accumulation, even when installed in horizontal piping. The result is minimal pressure drop, increased flow capacity and heat dissipation. Ordering information given below 

carbon dioxide gas cartridge, Fire Extinguishers

• Color: Yellow
• Condition: New
• Automatic Grade: Automatic
• Application: Making Foam
• Country of Origin: India

TYPES OF FOAM MAKING EQUIPMENT Foam making equipment provides the necessary means for the production of mechanical foam, which is used for fighting B class fires (Flammable liquids), these fires present themselves as contained tank fires or spill fires. There are three things necessary to create foam. a. Water, b. Foam concentrate, c. Air There are two ways a foam can be created at foam making branch One way is by inducting the foam concentrate at the branch using pipe dipped into the foam concentrate cans and getting mixed along with the incoming water and aspiration of air through air inlets.  Instead of inducting supplying the premix foam concentrate and water using an inline inductor and then this premix is pumped to the foam making branch where the air is aspirated through air inlets  In the above situation’s venturi principle is used to induce foam concentrate into the water stream moving with pressure 

flame arrestors, Rotameters, Bolts, Thermocouple, Hydraulic Fittings

• Capacity: 50ltr.
• Discharge Time: 60 - 180Secs.
• Is Specification: 13385 / LATES
• Approval: Also Available in ISI Mark
• Operation: Upright
• JetRange: 8 - 10Mtrs.

Co2 Trolley Fire Extinguisher, Dry Powder Fire Extinguisher

Foam Equipments, ms chequered plates, Slit Coils, Mild Steel Flat Bar

LX Foam Making Branch Pipe, Fume Hood Fire Protection System

flame arrestors, flange guards, Level Indicators, magnetic trap

fire extinguisher spare parts, Abc Type Fire Extinguisher, Fire Alarm System