Fire Fighting Equipments Dealers in Kalbadevi, Mumbai

• Usage: Fire Extinguisher
• Pressure: 27 Bar
• Diameter: 30/37mm

Developed as a Halon replacement, FM-200® is the best people-compatible, clean agent fire protection for vital facilities. It extinguishes fire through a combination of chemically-based fire inhibition and cooling. It is environmentally acceptable, safe to use with sensitive equipment, fast acting, efficient and effective.   Benefits of Using FM-200® Fast Acting - FM-200® can stop fires just in seconds. Extinguishing fires quickly means less damage, repair costs and extra safety Safe For People - FM-200® has been tested extensively to ensure safe exposure to people No Collateral Damageg - FM-200® does not leave oily residues, particulates, water, or corrosive material. This eliminates collateral damage to delicate equipment Environmentally Responsible - FM-200® has a low environmental impact because it has a low atmospheric lifetime. It also has zero potential to deplete the ozone layer Small Space Requirement - Other fire suppression systems, such as Co2 and inert gases require as much as seven times more storage space Globally Accepted - FM-200® is the most widely accepted clean agent in the world. It is used in tens of thousands of fire suppression systems

The S2351E photoelectric smoke detector forms part of the Series 300 range of conventional detectors. This range of detectors has been produced using the latest in manufacturing and design techniques, pushing out the boundaries of existing conventional detector technology. With it’s multitude of innovative features, the Series 300 is a detector which ‘acts conventionally, thinks intelligently’. The S2351E photoelectric detector incorporates an Application Specific Integrated Circuit (ASIC). Combined with the latest state of the art optical chamber the detector provides efficient and accurate detection of fires with a high level of resilience to non-fire environmental influences. The S2351E and other detectors in the Series 300 range are backward compatible with the Series 100 detector bases, thus providing the capability to upgrade, extend and maintain existing Series 100 installations.   Features :   Low profile design Low current draw Backward compatible with Series 100 detector range of bases Wide operating voltage 8 to 30V Bi-colour LED detector status indicator Automatic drift compensation Programmable sensitivity Addressable feature Advanced maintenance features via remote hand-held test unit Range of detector bases available Tested and approved to EN54 part 7 (2000) Extended warranty

We offer a range of FIRE HYDRANT SYSTEM and YARD HYDRANTS with all required accessories. Some of the feature of this systems are as follows - Pipe work from the fire water pump set.

We are offering water spray system is a special fixed pipe system connected to a reliable source of pressurised water supply and equipped with water spray nozzles for application on area equipment to be protected. The system can be operated automatically by connection to an automatic detection and alarm system or manually, or both. Water spray nozzles are designed to spray water directly onto the hazard surface via a series of nozzles with a carefully predetermined spray pattern. They are suitable for a variety of special hazards including transformer, turbines and combustible liquid hazards and systems can be individually tailored to your needs. Water spray systems are generally used for fire protection of flammable liquid and gas storage tanks, piping, pumping equipment, electrical equipment such as transformers, oil switches, rotating electrical machinery etc. And for protection of openings in fire walls and floors. Types of water spray system: medium velocity water spray systems (mvwss) high velocity water spray systems (hvwss) high velocity water spray systems (hvwss) are used for extinction of fires in flammable medium and heavy oils or similar flammable liquids having a flashpoint above 65 degree c. High velocity systems are often used to protect equipment that incorporate heavy or medium oils; equipment such as transformers, circuit breakers, diesel engines and fuel oil storage tanks, turbo alternator lube oil systems and oil fired boilers.

The Fire Entry Suit should have High level Protection and High Comfort using proper membrane Fabrics and Respirators for the fire extinguishing purpose.We are quality Aluminized Fire Proximity Suits Manufacturer services. The suit shall be suitable for human height from 165 cms to 175 cms. The fire entry suit should be made of 9 Layers of specialized Aluminized para-aramide fabrics and other insulation Fabrics. The suit also be composed of uninflammable polyrentene membrane. The inner isolated part of the suit should be stitched with Nomex and Aramid felt fabric. The combination of polyurethane fabric along with Aramid felt shields in filtrations of liquids into the suits and enables to check away the steam out of the suit. The polyurethane membrane should not allow the outside heat to enter the body premises. The suit shall be a two piece item covering complete human body consisting of hood integrated with the Coat as one piece and a Trouser having harness belt with shoulder straps. The suit shall be capable of being used over normal clothes. The entire Suit should be made of the Fabric assembly as mentioned above. The full detailed Features of the Garment should be as below : Coat with Hood should be sewed fastly together. The Hood should have visor with golden reflexive and unsweaty modification, double protective glass, double fastening, metal zip and Velcro being located into the are of hood, which enables a very comfortable wearing andputting up and down. The Coat should have a provision of wearing a Breathing Apparatus. Trousers should be having regular braces, the belt for making the waist slimmer in the lower parts of trouser, a metal zip for more comfortable putting up the shoes on the feet. Leggings - Steel in lay on the in step, the lower steel support for fasting the shoes and protecting against getting up the leggings. Gloves - 5 fingers with membrane against liquid at the wrist with knitting, to use over where over the gloves for protection against heat. Shoes, Overcoat - The shoe should have back side double fasting, metal zip and Velcro fasting belt for shoe inside the aluminised overcoat. The entire Fire Entry Suit should be provided with Gloves, Leggings, Shoe Overcoat and Breathing Apparatus pouch The suit shall be having enough space to accommodate inside a self-contained breathingapparatus in complete protected manner. The weight of total suit shall not be more than 8 kgs.   The entire Suit should be Certified as per EN 1486 standards and should achieve Level III with the weight not exceeding more than 8 Kgs. Shelf life (shall not be less than 5 years under specified storage conditions) TEMPERATURE PARAMETERS : The following temperature parameters should be met by the Suit certified by the manufacturer: (a) The highest direct flame temperature protection offered by the suit: ( i) 1500 deg. C for a continuous period of 10 seconds. ( ii) 1400 deg C for a continuous period of 30 seconds. (iii) 1200 deg C for a continuous period of 3 minutes. (b) The highest direct radiant temperature protection offered by the suit : ( i) 1500 deg C for a continuous period of 10 seconds. ( ii) 1420 deg C for a continuous period of 30 seconds. (iii) 1220 deg C for a continuous period of 3 minutes. (iv) 1200 deg C for a continuous period of > 7 minutes at a distance of 1.5 meters from the flame wall.

We are the main supplier of this product.

• Brand Name: Maxell Steel & Alloys
• Size: 12"nb to 48"nb
• Material: Stainless steel, alloy steel and carbon steel
• Type: Elbow Pipe
• Place of Origin: Mumbai  
• Packaging: Bulk

We are one of the leading manufacturers, suppliers, and traders of elbow -90 pipe fittings that is manufactured in compliance with international quality standards and offered in various sizes as well as patterns in the market. We offer them at competitive prices. These are checked on various parameters to deliver a defect free range. size : 12"nb to 48"nb in schedule: sch20, sch30, sch40, std, sch80, xs, sch60, sch80, sch120, sch140, sch160,xxs type : seamless erw welded fabricated material type: stainless steel, alloy steel and carbon steel.

• Size: L, M, S, XL, XXL
• Type: Fire Suit
• Material: PE, PP, PVC
• Application: Constructional Use, Industrial
• Type: Safety Suit
• Color: Black, Grey, Orange
• Pattern: Plain
• Feature: Heat Resistant, Skin Friendly, Waterproof, Good Quality
• Sleeve Style: Full Sleeve
• Neck Type: Collar
• Closing Type: Non Zipper, Zipper

• Brand Name: newage
• Material: Stainless Steel
• Bulb Size: 5mm,3mm
• Temperature Rating: 68degree
• Mounting Type: Wall Mounted

Fire ‘Z’ Brand Automatic modular Fire Extinguisher operates automatically at 68 degree. This is because it consists of a temperature sensitive Quartzite bulb of 68 degree centigrade temperature rating

We are offering fire fighting suit. It is made out of nomex iii a it consist of three layer: outer layer – nomex, second layer – moister barrier, inner layer – carbon felt suit consist of coat & pant or coverall style ce en approved.

• Material: HDPE
• Feature: Anti-Wrinkle,Acid proof
• Application: Fire Fighting
• Working Pressure: 30 MPa
• Ambient Temperature: 500 Degree F (260 Degree C))

• Material: Stainless Steel
• Capacity: 5Kg
• Color: red
• Fire Class: A
• Certification: ISO
• Specialities: Corrosion resistance, Rugged, Reliable
• Usage/Application: Fire Fighting

• Brand Name: U Safe
• Material: MS
• Finishing: Polished
• Capacity: 100,150,200 Ltrs
• Country of Origin: Made in India
• Feature: Comes with foam making branch & foam inductor .
• I deal in: New Only
• Hose Length: 15mtrs

J.C. Enterprises ahs been leading the market as one of the well known manufacturer and supplier of an extensive range of Fire Fighting Equipments. We have been supplying our range of Fire Protection Equipment to various industries. All the government and private sectors have acclaimed our range of products. Our equipments are portable and ensure complete safety against fire and also show excellent performance. Fire Protection Equipments offered by us : Fire ExtinguishersDry Chemical PowderDry Powder ABC typeMechanical FoamFirst Aid Hose ReelFire Hose BoxSmoke DetectorManual Call Point with HammerFire BucketFire Axe and so on

• Application: Metallurgy
• Feature: Durable
• Type: Long Sleeve Reflective Coverall
• Material: 100% Cotton
• Brand Name: Solitaire FR Coverall
• Size: S-XXXL
• Packaging Details: Good Quality Export Packing Can be customised as per clients requirements
• Port: Mumbai
• Name: Protective Suit
• Lead Time: 10- 15 days
• Function: Heat Insulated

We are reckoned as one of the preeminent Clean Agent System Suppliers in India. The Clean Agent Fire Extinguishing System offered by us is sourced from well-reputed vendors ensuring no alternative in terms of quality and performance. Various industrial sectors are placing bulk orders for the Clean Agent Suppression System due to its efficiency and reliability. Some of the salient features of the Clean Agent Systems offered by us are as mentioned below: Salient Features HCFC blend from the US EPA, NAF P IV.Formulated to optimize both the physical and extinguishing characteristics closely to those of Halon 12111.Used when an inert, electrically non-conducting media is essential or desirableUsed for computer, data center, server. Epabx, critical software rooms.Evaluated by The Loss Prevention Council in UK.Fire ratings of 70B and 5A have been achieved in accordance with CEN standard EN3.Ingredients used evaluated under the PAFT chronic toxicity testing programme and confirmed to have no known chronic toxicity.LC 50 is 13.9% and therefore allows safe use on NAF p IV.Available in capacity: 1kg, 2kgs, 5kgs, & 5kgs modular & portable.

• Size: S-XXXL
• Color: Customized
• Type: Long Sleeve Reflective Coverall
• Application: Metallurgy
• Material: 100% Cotton
• Feature: Durable
• Name: Protective Suit
• Place of Origin: Maharashtra, India
• Supply Ability: 5000 Piece/Pieces per Month
• Function: Heat Insulated
• Lead Time: 10- 15 days