Back Back
Stainless Steel Powder Based Fire Extinguisher
Get Price Quote
10 Piece (MOQ)
Fire Extinguishers
Get Price Quote
As quality is our topmost concern, we give maximum priority to the stringent checking of the entire range of products. In order to deliver a high quality lot of products, we make use of the best available resources and raw material. Also, we make sure that the material is sourced from the genuine vendors only. Product Details: Easy To Use Durability Unmatched quality Industry approved designs Light weight Leak proof
Best Deals from Fire Fighting Equipments
Grate Cooler Water Spray System
Get Price Quote
1 Piece (MOQ)
VEL Cooler water spray system comprises of complete set of skid mounted pumping & valve train system along with spray nozzles & relevant accessories. All necessary instruments, control valves etc are provided. All closed loop controls, sequence of operation, alarms & Safety interlocks are provided. The system may be interfaced to your existing PLC/DCS or may be provided with a standalone control panel. DESIGN CRITERIA The purpose or application, dimensions of the Grate Cooler, the height of the clinker bed, the overall gas flow, the gas temperature, the clinker temperature profile, number of nozzles needed and the height at which the lances are to fixed in the cooler compartment, the degree of cooling required put together determines the type of is spray system to be used,that is: Compressed air atomized water spray system Spillback water spray system Fogjet / Multicone water spray system Flatjet water spray system Application In Cement Industries, VEL Grate Cooler Water Spray System is used for cooling the vent gas for any of these purposes: To increase the efficiency of ESP by reducing fugitive dust emission. To reduce the power consumption of the vent outlet fan. To maintain a slightly more negative pressure at vent outlet thus contributing in reducing fugitive emission. To reduce the temperature so that the upstream conveying equipments could be designed for lower temperatures thus reducing the capital cost. To cool the clinker directly so that the inlet temperature to cement mill is within controllable limits. To control the depth of the clinker bed both to avoid grate burn-out due to low bed depth, and to avoid stalling the cooler fans due to excessive bed depth. To limit fluctuations in the secondary air temperature as this can upset the kiln temperature profile and adversely affect clinker quality. Principle Of Operation In VEL Grate Cooler Water Spray System, the temperature of the stream of gas / clinker is cooled in three stages: Heating of the injected liquid to the boiling point temperature corresponding to the system pressure. Conversion of part of the liquid into a gaseous state by evaporation of the liquid. Superheating of the evaporated liquid. We can also provide Grate Cooler Water Spray System especially for Direct Cooling of Clinker bed. This is normally required when the cooler is operated above its designed capacity. We design, manufacture, supply to achieve your ultimate goal.
Fire Extinguisher Wall Bracket
Get Price Quote
We are the reliable Supplier of Fire Extinguisher Wall Bracket. The Fire Extinguisher Wall Bracket, we offer, is wide on demand in the market for its efficient performance. These Fire Extinguisher Wall Brackets are used for providing the safety and security of people. Fire Extinguisher Wall Bracket is extensively used in residential as well as commercial sectors. We are offering the Fire Extinguisher Wall Bracket at cost effective solutions. Features Easy to use Offers complete safety Durable Cost effective Other Details Payment Mode : Cash/DD Shipment Mode : By Road
ABC Fire Extinguisher
Get Price Quote
Co2 33 gram 33g Cartridge for inflatable life jacket
600 - 601 Per Piece
10 Piece (MOQ)
Co2 33 gram 33g Cartridge for inflatable life jacket 150N 160N 170N
Stand Metal Detector
195,000 - 250,000 Per Piece
1 Piece (MOQ)
Fire pendent Sprinkler
65 Per Piece
100 Piece (MOQ)
Inline Foam Inductor
Get Price Quote
Vehicle Fire Suppression System
50,000 - 55,000 Per Piece
2 unit (MOQ)
Fire Sprinkler
Get Price Quote
Fire sprinkler.
Dry Powder Fire Extinguisher
Get Price Quote
fire entry suits
Get Price Quote
The Fire Entry Suit should have High level Protection and High Comfort using proper membrane Fabrics and Respirators for the fire extinguishing purpose.We are quality Aluminized Fire Proximity Suits Manufacturer services. The suit shall be suitable for human height from 165 cms to 175 cms. The fire entry suit should be made of 9 Layers of specialized Aluminized para-aramide fabrics and other insulation Fabrics. The suit also be composed of uninflammable polyrentene membrane. The inner isolated part of the suit should be stitched with Nomex and Aramid felt fabric. The combination of polyurethane fabric along with Aramid felt shields in filtrations of liquids into the suits and enables to check away the steam out of the suit. The polyurethane membrane should not allow the outside heat to enter the body premises. The suit shall be a two piece item covering complete human body consisting of hood integrated with the Coat as one piece and a Trouser having harness belt with shoulder straps. The suit shall be capable of being used over normal clothes. The entire Suit should be made of the Fabric assembly as mentioned above. The full detailed Features of the Garment should be as below : Coat with Hood should be sewed fastly together. The Hood should have visor with golden reflexive and unsweaty modification, double protective glass, double fastening, metal zip and Velcro being located into the are of hood, which enables a very comfortable wearing andputting up and down. The Coat should have a provision of wearing a Breathing Apparatus. Trousers should be having regular braces, the belt for making the waist slimmer in the lower parts of trouser, a metal zip for more comfortable putting up the shoes on the feet. Leggings - Steel in lay on the in step, the lower steel support for fasting the shoes and protecting against getting up the leggings. Gloves - 5 fingers with membrane against liquid at the wrist with knitting, to use over where over the gloves for protection against heat. Shoes, Overcoat - The shoe should have back side double fasting, metal zip and Velcro fasting belt for shoe inside the aluminised overcoat. The entire Fire Entry Suit should be provided with Gloves, Leggings, Shoe Overcoat and Breathing Apparatus pouch The suit shall be having enough space to accommodate inside a self-contained breathingapparatus in complete protected manner. The weight of total suit shall not be more than 8 kgs. The entire Suit should be Certified as per EN 1486 standards and should achieve Level III with the weight not exceeding more than 8 Kgs. Shelf life (shall not be less than 5 years under specified storage conditions) TEMPERATURE PARAMETERS : The following temperature parameters should be met by the Suit certified by the manufacturer: (a) The highest direct flame temperature protection offered by the suit: ( i) 1500 deg. C for a continuous period of 10 seconds. ( ii) 1400 deg C for a continuous period of 30 seconds. (iii) 1200 deg C for a continuous period of 3 minutes. (b) The highest direct radiant temperature protection offered by the suit : ( i) 1500 deg C for a continuous period of 10 seconds. ( ii) 1420 deg C for a continuous period of 30 seconds. (iii) 1220 deg C for a continuous period of 3 minutes. (iv) 1200 deg C for a continuous period of > 7 minutes at a distance of 1.5 meters from the flame wall.
Water Co2 Fire Extinguisher
Get Price Quote
We use superior-grade packaging as barrier protection for our products against dust, moisture, mechanical damages and logistical jostling. Our products packaging is premium. Advanced shipping services, well-planned and organized facilities; we are flexible in presenting the product range with utmost safety.
Fire Proximity Suit
Get Price Quote
In any industry a fire fighter has to work under conditions of very high temperature especially in case of aircraft fires, chemical fires etc. We supply alluminised fire proximity suits which exactly suit all the requirements in the above circumstances. These alluminised fire suits are made up of kevelar fabric. These suits are also useful in petrochemical plants.
Fire Retardant
Get Price Quote
You can opt to make payment by LOC, COD, Cash / Bank transfer, etc. according to the suitability of patrons. We are familiar with all and we make sure the transactions are secure. One of the foremost Suppliers, we are a known for the exceptional Fire Retardant in the market.
KANEX FE 36 CLEAN AGENT (SS BODY) Power SP 2 KG MAP 90
Get Price Quote
KANEX Dry Chemical Powder Stored Pressure Fire Extinguishers are specially designed for high performance and to achieve rapid Fire knock down capability for protection of light ordinary and high Hazards. These compact and portable extinguishers are suited for industrial, commercial and Domestic Fire protection needs. Dry Powder Stored Pressure Fire Extinguishers filled with specially fluidized and Siliconized mono ammonium phosphate dry chemical with MAP 90% as per standard requirements. It chemically insulates Class A fires by melting at approximately 175 °C and coats surface to which it is applied. It smothers and breaks the chain reaction of Class B fires and will not conduct electricity back to the operator.
INSULATED AXE
Get Price Quote
2 Piece (MOQ)
Pendent Sprinklers
Get Price Quote
fire retardant suit
Get Price Quote
Flame 100% Cotton fabric is teated with chemicals to impart Durable Flame Retardant (FR) properities as per Textiles Comittee's process. Chemicals react with Cellulose to form a permanent bond. There is no adverse effect to wearer's skin or comfort. Self extinguishing property avoids further damage. FR Fabric is used for the work wear like overall, Coats, & Trouser. Flame Retardant Overall is an insustrial Garment with full body and long sleeves, Five Pockets, Heat Proof Buttton or Zipper are used as Front Closer. Sizes available as required.
Fire Extinguishers
Get Price Quote
100 Piece (MOQ)
We manufacture all type of fire extinguishers like a b c type dry powder fire extinguisher, co2 fire extinguisher, dry powder fire extinguisher, mechanical foam fire extinguisher,modular automatic fire extinguisher, water co2 type fire extinguisher, clean agent fire extinguisher and all kind of fire fighting equipments. We provide complete fire extinguisher products range and after sales services on all india bases. With our commitment for quality and well developed manufacturing facility, we ensure to develop our range in tandem with the latest technological advancements in the market. This has enabled us in standardizing our products and meeting the specific requirements of the industry. Further, we constantly utilize our expertise for providing innovative solutions during the production processes. This assists us to present better and cost effective range of fire extinguishers that is at par with the set industry standards. Our organizations functions under the visionary guidance of our young and dynamic team of professionals. With their support and the collective expertise we are successfully meeting the varied standard and customized fabrication requirements of our clients. Moreover, oweing to their dedication towards their work we have emerged as one stop solutions for providing quality end products and service. With the assistance of our proficient technical team, we hold expertise to provide reliable maintenance basic and extended services required for all types of fire extinguishers. Our services includes labels which are checked for legibility, dip tubes, hoses and mechanisms checked for clear free operation and percentage tested according to total number of units in any given area to name a few.
Smoke Density Detector
5 Per Units
Fire Sprinkler System
Get Price Quote
Sprinkler is thermo-sensitive quarzoid liquid glassbulb burst actuated type and be standard products from an established firm of repute and standing and approved by an appropriate authority for fire fighting duty. It should be imported only. All sprinklers is brass castings polished / chrome OR white (polyester) unless stated otherwise and rated for 12.0 KG/CM2 WG and factory tested for 34.0 KG/CM2. Sprinklers is pendant OR side wall type as specified and shown on drawings. All sprinklers shall be provided with an adjustable OR Rosettes escutcheons finished same as the sprinkler head. Temp. classification of sprinklers in each space shall be as shown on the drawings. Sprinklers shall be selected for the coverage shown on the drawings and ordinarily be 15 MM. Wherever the specified sprinkler is not adequate. The tenderers may offer appropriate size required. Tenderers are free to suggest alternatively other suitable sprinklers with its justification.
Flame Retardant Coverall
Get Price Quote
We use quality-approved raw materials as inputs for the production of our finished goods. The selection procedure of the raw materials is conducted by our expert quality auditors. One stop destination for the best in class and exceptional assortment of Flame Retardant Coverall; we are a reliable Supplier amidst the customers. The Flame Retardant Coverall, delivered by us, is available in different sizes and colours.
frp 9l capacity red color durable fire safety equipment
Get Price Quote
1 Piece (MOQ)
CO2 Fire Suppression Systems
Get Price Quote
Fire Extinguisher Cylinder
Get Price Quote
Fire extinguisher cylinder is lighter and thus more portable. So you spend fewer minutes in carrying the extinguisher to the fire and fighting it successfully.There’s more to it than meets the eye. The new aluminum cylinders are produced by the extrusion method, rather than the spinning of steel pipes. This leaves no room for leakage or tampering. The result is an extinguisher that is not only lighter, but also sturdier and corrosion free.
BC Cartridge Operated Type Fire Extinguisher
Get Price Quote
Fire Proximity Suit
15,000 - 60,000 Per Piece
1 Piece(s) (MOQ)
Fire Equipment
4,600 Per Piece(s)
5 Box (MOQ)
Filter by Localities
