Fire Suit Dealers in Trombay, Mumbai

We have brilliant logistics network owing to which safe and timely deliveries are guaranteed with us. We manufacture full-body Fire Fighting Suits which are highly Flame Retardant & Anti-Static, in different sizes (S-XXXL). The company shares glorious credentials with the leading Suppliers of Fire Fighting Suit and offers the best deal.

Fire Proximity Suit is made out of 16 oz imported aluminized glass fibre fabric with dual mirror having 90% reflection of heat as a outer layer and with woollen fabric lining. Additional layer (Vapour Barrier) is also used for higher temperature. Outer fabrics tested and approved by Defence Institute for Fire Research New Delhi & field tests performed by Defence-Indian Navy NBCD School, INS Shivaji. Lonavla Maharashtra

ALUMINISED FIRE PROXIMITY SUIT Manufacturers, Suppliers & Exporters Alugen® Aluminised Fire Proximity Suits are manufactured in compliance to meet stringent ISO 9001 standards. The fabric used to produce Alugen® suits are from GENTEX's proprietary Dual Mirror® / Flexir®Aluminized Fabrics, Imported from USA, which reflects 95% of heat and ensures superior protection and performance in the extreme work environments faced by civilians, emergency service, homeland defense and military personnel. Alugen® Aluminised Fire Proximity Suits offer an efficient solution to working in high-temperatures with superior durability.The most critical part about the Aluminised Fire Proximity Suit is the intactness of Aluminium on the outer layer of the suit as it reflects 95% heat, thereby allowing the wearer to remain much longer in proximity to heat & fire. The durability of Aluminisation on fabric can be confirmed by conducting a test named “Wet Flex” test. The procedure goes as follows,  The fabric is dipped in 60°C hot water for 15 mins and then 1000 machine abrasion cycles are conducted. There should be no delamination, or peeling off on any part of the fabric. All 'Alugen' Suits are made from fabrics which pass Wet Flex test. Most of the fabrics available in market do not pass this critical test. As a user one should be careful about this. GENTEX's proprietary Dual Mirror® / Flexir® Aluminized Fabrics offers an exceptionally high level of abrasion resistance - the result of its unique, five-layer fabric structure. This proven system ensures that the suit remains highly reflective even after repeated use and proper care and cleaning.   The five layers consist of an outer skin of 1. Aluminum, 2. Protective film, 3. Second layer of Aluminum, 4. Heat-stable adhesive and 5. Base fabric. These individual layers are then combined to form a single fabric. The five layers consist of an outer skin of aluminum, a protective film, a second layer of aluminum, heat-stable adhesive and a base fabric. These individual layers are then combined to form a single fabric (As below).  

• Material: Nomex
• Size: Large
• Color: Blue
• Gender: Unisex
• Country of Origin: Made in India
• Brand: Milan Safety
• Usage/Application: Fire Safety
• Model Name/Number: FFS01
• Wear Type: Reflective
• Number Of Layers: 3 layers
• Sleeves Type: Full sleeves
• Wash Care: Machine wash
• I Deal In: New Only 
• Heat Resistance: Yes
• Product Type: Jackets & Coats

Series NA2K & Series A3K developed and manufactured by Modern Apparels are engineered to the highest levels of protection to the Firefighters & Rescuers against extreme temperatures. These Fire Entry suits can be used in preparation for possible fire eruption or for stand-by operations should a rescue or evasive action require passage through a fire zone. The Series 2K can withstand temperatures to 1093oC (2000oF) against heat and fire while Series A3K, having Aluminized outer shell can withstand high radiant heat to 1650oC (3000oF).  Applications : Fire Entry Suit are used in various industries like Petroleum, Oil & Gas, Electricity Generation, Steel, Defence, Petrochemicals & Refining and all places where there is hazard of fire eruption and extreme heat generation.  Specification:-Suit made of multiple layers for maximum heat protection. Breathing apparatus required. Suit consist of :- HOOD: Designed to be used with air mask. Inner drape flame seals. Underarm adjustment straps. Built in shell for structural support. Hard cap with ratchet headgear. Speedy clip for hard cap support. Hardened aluminum window frame with 2 tempered glass lenses plus 2 gold plated Lenses for thermal protection. COAT: Designed to be worn with breathing apparatus. Double storm fly Front : Flame seal with drawstring at coat bottom. PANT: High waist design. 2 inch wide adjustable suspenders. Adjustable Straps on leg bottoms. BOOTS: Designed to fit over work shoes. Rear entry with overlap snap closure and adjustable take-up straps. Insulated wire reinforced sole of flame resistant neoprene fiberglass riveted to boot cover. MITTS: Heavy weight construction made with Aluminised fabric.WEIGHT: weight of complete suit will be approximately 25 kgs. CERTIFICATIONS : Made Out Of Fabric Which Are Tested & Passed EN ISO 11612.

Our manufactured fire entry suits are designed in such a way so as to provide maximum personal fire protection. They are useful in fire fighting as well as while passing through a passage affected by fire . These fire entry suits have been provided with minimum 8 layers of insulation.

• Size: Large
• Material: Aluminum
• Pattern: Plain
• Closing Type: Zipper
• Gloves Size: 14 inches
• Layers: 2 -4 Layer
• Weight: 350 - 1600 GSM
• Fabric Quality: 430 g/sqm
• Zipper closer size: 7 to 9 inches
• Heat Resistant: 800-1000 degree C
• Product Type: Fire Suit
• Sleeve Type: Full sleeve
• Packaging type: Galvanized Trunk
• Stitching Type: Kevlar Thread
• Wear Type: Reflective
• Inner Layer: Thermal Barrier
• Middle Layer: Vapour Barrier
• Innermost Layer: Woolen, Flame Retardant Cotton

We offer high performance Aluminized Fire Proximity Suits that is widely applicable in intense heat, fire, steam and hot liquid. These Fire Proximity Suits are extensively used in the petrochemical plants, foundries, plant, steel, glass, ceramics and defence industry. The Fire Proximity Suit has been specially developed and field tested for rescue operations. The outer layer of these suits is made from 16 oz imported aluminized glass fibre fabric with dual mirror which has 90% reflection of heat.

Fire entry suit is specially designed for complete protection from fire. Fire entry suits are generally made up 8 layers of insulation In this case boots, soles and hoods are also completely insulated. We manufacture fire entry suits strictly adhering the standards of ISO 9001. Here fire fighter while performing his duty may come in contact with fires where temperature can be more than 2000 ° F. sometimes. Our fire fighting suits are manufactured taking into consideration all these aspects and we can confidently say that they are able to protect fully the user from heat up to 3000 ° F

Owing to our rich experience and proficient personnel, our company has emerged as one of the well known manufacturers and suppliers of Fire Proximity Suits. We bring forth a wide range of Fire Fighting Workwear which is designed as per the requisite norms and standards. Available in various sizes and colors, our Fire Fighting Suit are widely known for their smooth finishing, skin friendliness, tear resistance, seamless stitching and many other striking features. Features: Suitable for heat up to 1500°C KEVLAR Thread is used for Stitching Made from glass fiber cloth with vapor Shoes are made up with oil and heat resistant sole

Fire Proximity Suit is made out of 16 oz imported aluminized glass fibre fabric with dual mirror having 90% reflection of heat as a outer layer and with woollen fabric lining. Additional layer (Vapour Barrier) is also used for higher temperature. Outer fabrics tested and approved by Defence Institute for Fire Research New Delhi & field tests performed by Defence-Indian Navy NBCD School, INS Shivaji. Lonavla Maharashtra

• Brand Name: Ingress
• Color: Silver
• Gender: Unisex
• Weight: 12 Kg
• Features: Soft texture , Allowing air circulation , Fire retardant.
• Sleeve Type: Full Sleeves
• Heat Upto: 3000 Deg F (1650 Deg C)

AramidKevlar non woven laminated with PTFE membrane for maximum breathability and hydrostatic head (waterproof) performance. (EN 343 protection against foul weather)Constructed using non-woven ARAMIDE KEVLAR fibers laminated with NomexViscose innermost ling fabric for maximum protection.

Fire safety suit is also used for higher temperature. Outer fabrics tested and approved by Defence Institute for Fire Research New Delhi & field tests performed by Defence-Indian Navy NBCD School, INS Shivaji.

Fire Suit, Gas Mask

Fire Fighting Suit, Soil Testing Kit, Safety Shoes, DUST AND FIRE RESPIRATOR

Fire Fighting Suit, Fire Extinguisher, Road Safety Barrier

Fire Suit, Hand Protection Gloves, Fire Hoses

Fire Suit, Boiler Suits, portable fire pump, escape chute, Safety Products