Fitco Engineers Pvt. Ltd. Andheri, Mumbai, Maharashtra

Fitco wiper seals are used to protect seals preventing from dust, mud, water particles etc. They are made of nitrile rubber generally 90 shore a, for press in fitting in open housing

Fitco wiper seals are used to protect seals preventing from dust, mud, water particles etc. They are made of nitrile rubber generally 90 shore a, for press in fitting in open housing  

Fitco bearing rings is mainly used on piston rods,it provides guiding & bearing surfaces between rod and housing and prevents metal to metal contact between them.

Fitco V-Ring seal is a single lip seal rotary aplication is an all elastomer axial seal for shaft and bearing, It seals axially against a counterface. They are generally made in NBR,VITON(FKM)

V-Ring Seals is a single lip seal rotary aplication is an all elastomer axial seal for shaft and bearing, It seals axially against a counterface. They are generally made in NBR,VITON(FKM)  

Thrust bearings are a particular type of rotary bearing that allow rotation between parts used but they are designed to support axial loads like vertical shafts for which spherical, conical or cylindrical rollers are used. They are used in gear sets like in car transmissions between gears and between the housing and the rotating shafts. Thrust bearings are of different varieties. Ball thrust bearings are composed of ball bearings supported in a ring. They are used in low thrust applications where the radial load is very small. Thrust roller bearings are made of small tapered rollers arranged so that their axes converge at a point on the axis of the bearing.

Tapered roller bearings use conical rollers that run on conical races. Both the inner and outer raceways are segments of cones and the rollers are also made with a taper. Unlike other roller bearings, they support both radial and axial loads, and are able to carry higher loads. The conical geometry of tapered roller bearings provide a larger contact patch, which allows greater loads to be carried as compared to spherical (ball) bearings. The geometry ensures that the tangential speeds of the surfaces of each of the rollers are same as their raceways along the whole length of the contact patch and no differential scrubbing occurs. This greatly reduces rolling friction and avoids rapid wear. Taper roller bearings are used in the wheel bearings of most trucks, buses, cars, and so on. Due to manufacturing complexities, tapered roller bearings are generally more expensive than ball bearings.  

APPLICATIONS Automotive Power Generation Petrochemicals Fluid Power Instrumentation Chemicals & Fertilizer Plants Electronics Filtration Pharmaceuticals Hydraulic Fittings Hydraulic Cylinders Pneumatic Cylinders Valves and Pumps Plumbing Products Dairy/Food Processing Earthmoving & Construction Equipment

Rotary Ring(Plastic Carbon/Carbon/Sic/TC) Stationary Ring(Ceramic/Sic/Tc) Secondary Seal(nbr/Epdm/VITON) Spring & Other Parts(SS304/SS316)

Fitco sealing solutions specializes in the manufacturing of precision rubber extrusions and extruded rubber profiles in all shapes, sizes and lengths in a wide range of solid and sponge rubber materials. The majority of these rubber extrusions can be produced in a solid or hollow inside form.

Our O Ring Kit is industry standard. The kit contains a total of 382 o rings, in 30 of the most often used AS568 Standard sizes. The outside top cover has detailed, labels indicating the sizes and quantities of the o ring seals in each compartment , and the highly attractive red styrene box features both post and recess styles of o ring retention.

FITCO Rubber Cord is an O Ring Profile available in running lengths and in various cord diameters. The cord can be profile cut to required angle and both ends joints with the help of an adhesive to form a circular ring.

APPLICATIONS Automotive Power Generation Petrochemicals Fluid Power Instrumentation Chemicals & Fertilizer Plants Electronics Filtration Pharmaceuticals Hydraulic Fittings Hydraulic Cylinders Pneumatic Cylinders Valves and Pumps Plumbing Products Dairy/Food Processing Earthmoving & Construction Equipment

Fitco maintains a portfolio of individuallly customisable, high performance speciality products for hydraulic sector. The seal design and materials used make it particularly suitable for most vigorous application. The seals are made for sigle acting & double acting cylinders.

Ring joint gaskets are manufactured in different solid metal types such as Soft iron/SS304/316/321 metals and similar other alloys. These ring joint gaskets are ideal for the industrial use due to their enhanced performance and reliable durability. These ring joint gaskets stop leakage that causes corrosion around manholes and hand holes in steam boilers, water heaters and air tanks.  

Fitco sealing solutions specializes in precision machined custom materials and custom parts in wide variety of polymer products in ptfe, ptfe filled compounds, peek, delrin, pvdf, nylons ,uhmwpe , acetal pom (derlin)and many combinations of high-performance materials ideally suited for use in original equipment and industrial maintenance.

Pneumatic Seals range including lip seals for rod or piston, cushioning seals, also some multifunction seals which combines sealing-wiping-fixing.  

FITCO maintains a portfolio of individually customisable,high performance speciality products for hydraulic sector.the seal design and materials used make it particularly suitable for most vigorous application.the seals are made for single acting & double acting cylinders.

Fitco sealing solutions is a leading supplier of oe quality aftermarket oil seals for automotive, industrial and agricultural applications in highly resistant oil seals that support the performance of equipment.

We produce o-rings in any custom size , standard and metric sizes in special grades of elastomer which can withstand low & high temperature in wide range of materials; viton fkm, silicone, nitrile nbr, ethylene-propylene epdm, fluor silicone, neoprene rubbers.

We supply standard size of O-Rings as per AS 568 (USA size standard), BS 1516 (UK size standard), JIS B 2401 (Japanese size standard), ISO 3601/1 (ISO size standard), DIN 3771/1 (German size standard), GB 3452.1 (Chinese size standard) and other custom size of Metric, Imperial sizes of O-rings on order in wide range of materials : NBR / FKM / EPDM / HNBR / VMQ (Silicone) / PTFE / PU  

Pressure: ≤2.1MPa Speed: ≤25 m/s Temperature: -20℃~+200℃ Rotary Ring (SiC/Carbon/TC) Stationary Ring (SiC/TC) Secondary Seal (VITON/Encapsulated Ring/PTFE) Metal Bellows (SS316L/AM350/Inconel 718/Titanium/Hastelloy-C/ALLoy-20) Other Parts (SS304/SS316/Titanium/Hastelloy-C)

We manufacture industrial cut gaskets tailored as per the needs and requirements of our customers Our clients can provide us with the required specification in the form of a drawing standard as per ASA, BS, DIN, etc. They can also detail us with the specifications with regard to size, sample and drawings from any essential gasket material such as CAF, cork, graphoil, oil paper, vegetable fiber, felt, PTFE, rubber and non asbestos sheet.  

APPLICATIONS Automotive Power Generation Petrochemicals Fluid Power Instrumentation Chemicals & Fertilizer Plants Electronics Filtration Pharmaceuticals Hydraulic Fittings Hydraulic Cylinders Pneumatic Cylinders Valves and Pumps Plumbing Products Dairy/Food Processing Earthmoving & Construction Equipment