Flake Ice & Refrigeration Systems Private Limited Fort, Mumbai, Maharashtra

    Designed for marine application. Available with R 404A or R 22. Condensing units & Control panel assembled as an integrated unit. Needs only power & water supply. Work with fresh or sea water. Apacities ranging from 1 T to 5.5 T/day.

    Dry and sub cooled ice. A stationary and insulated cylinder. Few moving parts liable to wear and tear. Little mechanical constraints. Optimum thermal exchange. Compatibility with numerous refrigerants: R717, R404A, R22, etc. Available with flood bottle or suitable for Pump circulation. Capacities ranging from 0.3 to 50 Tons/day.

Can be used for + 5 to + 350 C (Ambient temp.),Can be available with R 404A or R 22.Condensing units & Control panel assembled as an integrated unit.Needs only power & water supply.Capacities ranging from 0.3 T to 15 Tday.

The Flaking surface of the drum is duly ground and hard chromed with superior finish for fast and uniform formation of Flakes and prevention of dried material being stuck on the drum surface after scrapping. The drum is provided with a Hollow shaft for entry of Cooling medium. Rotary joint is provided on the hollow shaft at the Intel and Mist of Cooling medium.

    Can be used for + 5 to + 350 C (Ambient temp.) Can be available with R 404A or R 22. Condensing units & Control panel assembled as an integrated unit. Needs only power & water supply. Capacities ranging from 0.3 T to 15 T/day.

  Can be ceiling suspended as well as floor mounted suitable for Freon as well as Ammonia. Ceiling suspended units in the range of 2 TR, 3 TR & 5 TR. Floor mounted units range from 5 TR, 7.5 TR, 10 TR, 15 TR & 20 TR. Coils can be in different configuration; SS tubes with Al. fins, Cu tubes with Al. fins. Al. tubes with Al. fins (imported coils). Coils provided with electric defrosting. Cabinets are made of 16 SWG CRCA duly treated zinc metalised (or) powder coated. Fans can be propeller or tube axial with TEFC Motors. Provision can be given for capacity control.

5 TR to 200 TR of induced draught forced draught design suitable for Freon & Ammonia design.Continuous serpentine coil made of seamless tube pneumatically tested to 375 psig, treated & zinc metallised.Tube axial fan with blades in Aluminium casting duly balanced for induced & blower for forced draught unit.

    5 TR to 200 TR of induced draught / forced draught design suitable for Freon & Ammonia design. Continuous serpentine coil made of seamless tube pneumatically tested to 375 psig, treated & zinc metallised. Frame work in M.S. duly treated & zinc metalised. Cabinet cover in 16 SWG CRCA duly treated & zinc metalised. Tube axial fan with blades in Aluminium casting duly balanced for induced & blower for forced draught unit. With TEFC Motor, provision can be given for different speeds.

Cold Rooms can be of Modular / Custom built. Puf Panel density 38 kg to 44 kg/ m 3 , optimum thermal insulation, light weight. Puf panel with galvanized finish / S.S. interior / Plain or corrugated finish available. Metallic Cam locks for firm joints between the panels. Puf panel thickness available from 40 mm to 200 mm. Puf slabs available for floor insulation. Doors can be of Hinged / Sliding with different thickness. Sliding can be automatic or manual.

Aesthetically Designed Construction.In-built Electrical & Safety Cut-Outs, Expansion Valves for Evaporators.Units designed for high ambient conditions.30 Different models of positive and negative temperatures.Easy access to all componets for installation and maintenance.Evaporator can be ceiling wall mounted

Aesthetically Designed Construction. In-built Electrical & Safety Cut-Outs, Expansion Valves for Evaporators. Units designed for high ambient conditions. 30 Different models of positive and negative temperatures. Easy access to all componets for installation and maintenance. Evaporator can be ceiling / wall mounted Inner grooved coils for efficient heat transfer.

For the continuous requirement of chill water in the process industry ranging from 2000 ltrs/hr to 20,000 ltrs/hr. Units will be Package Units in Freon as well as in Ammonia with chill water temperature ranging from 50 C to 100 C using S.S. plate heat exchangers

We are offering tube ice machine.