Back Back
Flanges
Get Price Quote
We supply Stainless Steel flanges, High Nickel alloy Flanges and backup stainless pipe flanges. Our pipe flanges come in a wide selection of dimensions and alloys. Flanges are available in Slip On, Blind, Weld neck, and Socket weld, Threaded, Lap Joint, Orifice and Spectacle Blinds, Tongue & Groove & Ring Joint Types, Vacuum Flanges, Exhaust Flanges, Profile Flanges.
Nickel Alloy Flanges
Get Price Quote
Nickel Alloy ASTM B 564 Flanges | Nickel Alloy Socket Weld Flanges | Nickel Alloy Ring Joint Flanges | ASME SB 564 Nickel Alloy Threaded Flanges Speco Alloys Inc are dominant manufacturers of superior quality of Nickel Alloy Flanges. At Speco Alloys Inc, a significant emphasis is laid on ensuring of service delivery and quality. We at Speco Alloys Inc provide Nickel Alloy according to national and international standards of ASTM B 564 / ASME SB 564, ASTM A 403 / ASME SB 403. with grades such as UNS 2200 (Nickel 200), UNS 2201 (Nickel 201), UNS 4400 (Monel 400), UNS 8020 (Alloy 20/20) Cb 3, UNS 8825 Inconel (825), UNS 6600 (Inconel 600), UNS 6601 (Inconel 601), UNS 6625 (Inconel 625), UNS 10276 (Hastelloy C 276). We exports Nickel Alloy ASTM B 564 - Forged Flanges, Nickel Alloy Blind Flanges, Nickel Alloy Reducing Flanges, Nickel Alloy Orifice Flanges, Nickel Alloy Socket Weld Flanges, Nickel Alloy Slip On Flanges, Nickel Alloy Flat Flanges, Nickel Alloy Lapped Joint Flanges, Nickel Alloy SWRF Flanges, Nickel Alloy Square Flanges, Nickel Alloy Threaded Flanges, Nickel Alloy ASTM B 564 -Weld Neck Flanges Series A Or B, Nickel Alloy WNRF Flanges, Nickel Alloy Expander Flanges, Nickel Alloy High Hub Blinds Flanges, Nickel Alloy Spectacle Blinds Flanges, Nickel Alloy Loose Flanges, Nickel Alloy ASTM B 564 - RTJ Flanges, Nickel Alloy Screwed Flanges, Nickel Alloy Weld Neck Flanges, Nickel Alloy Flange Facing Type & Finish, Nickel Alloy SORF Flanges, Nickel Alloy Groove & Tongue Flanges, Nickel Alloy ASTM B 564 Long Neck Weld Flanges, Nickel Alloy Spades Ring Spacers Flanges, Nickel Alloy Ring Type Joint Flanges, Nickel Alloy ASTM B 564 - Weldo / Nipo Flanges. At Speco Alloys Inc, We provide Extensive varities of Flanges like Weld neck Flanges (WNRF), Slip-on Flanges (SORF), Blind Flanges (BLRF), Lap Joint Flanges (SOLJ), Socket-weld Flanges (SWRF), Screwed (Threaded) Flanges, Long weld neck Flanges (LWNRF), Spectacle Blind Flanges, Spacer and Blind Flanges, Ring Type Joint Flanges (RTJ), Reducing Flanges, Raised Face (RF) Flanges, Orifice Flanges, Custom Flanges, Drawing Flanges, Forged Flanges, Plate Flanges, Flat Face Flanges, and so on.
Best Deals from Flange Guards
Flanges
Get Price Quote
Offering flanges.
Alloy Flanges
Get Price Quote
We supply Stainless Steel flanges, High Nickel alloy Flanges and backup stainless pipe flanges. Our pipe flanges come in a wide selection of dimensions and alloys. Flanges are available in Slip On, Blind, Weld neck, and Socket weld, Threaded, Lap Joint, Orifice and Spectacle Blinds, Tongue & Groove & Ring Joint Types, Vacuum Flanges, Exhaust Flanges, Profile Flanges. Pressure rating class of 150, 300, 600, 900, 1500 & 2500 and size from 12” NB to 64” NB sizes Flanges are manufactured as per ANSI B 16.5, B16.47, MSS SP 44, API, BS, AWWA, DIN standards
Blind Flange
Get Price Quote
10000 Piece (MOQ)
A Flange is a method of connecting pipes, valves, pumps and other equipments to form a piping system. It also provides easy access for cleaning, inspection or modification. Flanges are useally Welded or Screwed. Flanges joints are made by bolting together two flanges with a Gasket between them to provide a seal. DIAMENTION . STD :- ASME B16.5/B16.47. GRADE :- ASTM/ASME A105, A350 LF2 & A182 Gr.F5,F11,F22,F51,F52,F91,F92,F 304, F304H,F304L,309H, 309S, F310,F316, F316L,F317, F317L,F321 & F347H CLASS :- 150#, 300#, 600#, 900#, 1500# & 2500# RANGES :- 1/2”NB TO 24”NB
Cf Flanges
Get Price Quote
We are offering cf flanges & fittings cf vacuum flanges manufactured by applied vacuum technology are compatible with conflat® style flanges produced by other ultra high vacuum system manufacturers and are available in sizes from 1.33" od to 16.5" od in both rotatable and non-rotatable configurations. Vacuum flanges 4 1 2" od and larger are made from specially processed 304l plate stock. We do not use plate which has sulfur and calcium injected to improve machinability as these impurities manifest themselves as slag pools when the material is welded. Further, we use type 304l for our vacuum flanges to minimize carbon precipitation at weld joints. Cf vacuum flanges are suitable for use from atmosphere to 1 x 10-13 torr and can be baked to 500°c. All vacuum fittings are thoroughly cleaned before packaging and are ready for use as received. Copper gaskets are made from ofhc copper and are individually packaged ready for use. Bolts are made from high tensile strength stainless steel which have thermal characteristics matched to those of the vacuum flanges. Screws for 2 3 4" od flanges and larger have external 12 point heads and are silver plated to eliminate the need for thread lubricant. Washers are not required for 1.33" and 2 3 4" od flanges.
Blind Flanges
Get Price Quote
Our Blind Flanges feature proper bolt holes with a round plate having no center hold. Extensively employed for proper closure of the ends in the piping systems, the range of Blind Flanges is also useful in accessing a line even after its sealing has been done. Blind Flanges are offered by us in varying sizes and dimensions as per the specific requirements of the clients and in standards sizes as well. Useful for standard sized pipes that have to be reduced by threading or welding.Materials of Construction : Stainless Steel Nickel Alloy Carbon Steel Titanium Aluminum Cast Iron Brass Bronze Polypropylene Silicone PVC Information : When used with NPT Fittings, these are useful for testing pressure Blind Flanges handle the highest stress in terms of internal pressure and bolt loading Blind Flanges can be placed at a greater height than other flanges because the maximum stresses in them are the bending stresses at the centre Why our Blind Flanges? Dimensionally accurate Robust construction Smooth finishing Corrosion resistant High stress bearing capacity Hard-wearing Ideal for : Pipes Valves Equipment nozzles Range : ½ (15 NB) to 48 (1200NB) in 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS ASA 150, ASA 300, PN 6,10,16,25, 40,64,100,160 ETC. Available with NACE MR 01-75Availability : Stainless Steel Grade - 304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 L, 317, 317L, 321, 347, 347 H, 409, 410, 410S, 420, 430L Duplex Steel Grade - 2205 (UNS No. S31803), 2507 (UNS No. S32750) Nickel Alloy Grade - Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II) Copper Alloy Grade - UNS No. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500, UNS No. C 70600 (Cu -Ni- 90/10), C 71500 (Cu -Ni- 70/30) Standards : ANSI - ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 DIN - DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673 B.S - BS4504 , BS4504, BS1560, BS10 What we offer : Hot Dipped Galvanizing Heat Treatment CNC Machining Threading
Round Carbon Steel Flange
100 Per Kilogram
100 Kilogram (MOQ)
Socket Weld Flanges
Get Price Quote
10 Piece (MOQ)
Flange
Get Price Quote
Our range is demanded by our clients due to features like durability, sturdy construction, dimensional accuracy and high tensile strength. We are linked with well established vendors to procure high quality material that are used in the fabrication of tools. Moreover, we also possess proficiency in offering customized range to match the exact requirements of our clients.
Alloy 20 Flange
Get Price Quote
Alloy 20 (UNS N08020) is an austenitic, nickel-iron-chromium based super alloy with additions of Copper and Molybdenum which provide resistance to hostile environments, pitting, and crevice corrosion. It is also stabilized with Columbium to minimize carbide precipitation during welding. Alloy 20 appears to fall between both the stainless and nickel categories as it contains characteristics of both. It was designed for maximum resistance to acid attack and demonstrates superior resistance to stress-corrosion cracking in boiling 20% to 40% sulfuric acid, and also has excellent general corrosion resistance to sulfuric acid and to chloride stress corrosion cracking. Alloy 20 has good mechanical properties at both ambient and elevated temperatures, up to approximately 930°F (500°C) and is readily fabricated by usual industrial processes.
Stainless Steel Sheet
Get Price Quote
We Avail Of This Opportunity To Introduce Ourselves As One Of The Leading India Base Importer, Stock Holder & Supply Of Wear Abrasion Resistant Steel Plates ( Hardox Plate) , Nickel Alloys Materials & Stainless Steel Materials & MN STEEL , Sail Hard Plates , Boiler Quality ( BQ ), MS Plates, Alluminium, Brass , Copper, & All Item In Ferros & Non Ferros Materials Etc. In Sheets , Plates, Pipes, Pipe Fittings ( In Bends, Reducers, Couplings, Nipples , Collers Etc) Tubes, Rod, Flat, Circles, Wire, Angle, Flanges , Nut & Bolt Etc. Even The Material Is Supplied With Excise Modvat Benefit. In Grades Of Stainless steel 904L , 304, 304L, 316, 316L, 316 TI, 309, 310, 317, 321, 410, 420, 430, 430C, 2205 ( DUPLEX ) & Also Nickle Alloys Materials Etc. SIZES : THIKNESS : 0.10 MM TO 50MM THK WIDTH : 1000MM / 1250 / 1500 / 2000. LENGTH : 3000 / 4000 / 5000 / 6000 & CUT LENGTH ALSO PROVIDE.
Industrial Flanges
Get Price Quote
For the production of our finished products, we source the raw materials only from the certified and trusted vendors after checking against numerous quality parameters. We are tagged as a prominent name for supplying Flanges in the national market. Application : Automobile Parts, Valve Parts, Construction, Oil and Piping Industry.
Copper Bars
750 - 900 Per kg
As we are much more concerned about the safety of the products, we keep them under a secured environment of our capacious and well-structured warehousing unit that is supervised by experts. We work in close coordination with the team members and packaging professionals; they ensure that the products are packed sternly using the finest quality packaging materials.
Weld Neck Flanges
Get Price Quote
Spectacle Blind Flange
Get Price Quote
M P Jain Tubing Solutions LLP welcome small and large quantity orders and are capable of manufacture Spectacle Blind Flanges according to drawings provided by customers. An ISO / OHSAS / PED Certified Stockist and Exporters of Spectacle Blinds Manufactured with the finest quality raw materials (Stainless Steel, Duplex, Super Duplex, Nickel Alloys, Cupro Nickel, Alloy 20, Carbon Steel, etc.) results in High-Quality End Products. With the quality, we also guarantee On-Time Delivery of ASME B16.5/B16.47 Spectacle Flange. If clients have any query regarding purchased products they can chat with our support team live on a website (24/7 support service) or they can mail us on exports@mpjainco.com. Our state-of-the-art infrastructure is located in the industrial hub, Mumbai India and we possess a team of highly qualified as well as experienced professionals. We continuously keep on upgrading our machinery to meet the challenges of fiercely competitive and ever changing market demands.
MS Asa 150 Class A 105 Flanges
Get Price Quote
Stainless Steel Sheet
Get Price Quote
2 Ton (MOQ)
1) Product Name:- Stainless Steel Plate(Sheet) 2) Stardard:- AISI, GB, JIS, ASTM, DIN etc. 3) Grade:- 200, 300, 400 Series, 201, 202, 301, 304, 304L, 309S, 310S, 316, 316L, 410, 430,etc. 4) Specification:- According To Client's Requirement 5) Technology:- Hot Rolled, Cold Drawn. 6) Packing:- Kraft Paper, Plastic Bags, Wooden Pallets 7) Payment Term:- 30% Advance By TT & Bal 70% Against Invoice, Packing List or TC . 8) Quality:- MTC 9) Application:- Machine-Made Industry, Chemical Industry, Shipping Industry Architecture, Food Industry, Household Products, and so on.
Stainless Steel Pipe Fittings
Get Price Quote
AmTex Enterprises has carved a niche for itself in the domestic markets as a Supplier of Stainless Steel Pipe Fittings. Our Stainless Steel Pipe Fittings is demanded for its matchless quality and anti corrosive feature. We offer only finely finished Stainless Steel Pipe Fittings that is ideal for a variety of industrial applications.
Stainless Steel Flanges
Get Price Quote
We are the leading supplier of this products.
copper flanges
Get Price Quote
we prashaant steel are exporting of a wide range of copper flanges offers you a supreme quality of copper alloy steel flanges. We are involved in making a resilient range of copper alloy steel flanges which can further be customized and standardized according to client specifications. grade: uns no. C 92200 uns no. C 83600 uns no. 70600, 71500 c 70600 (cu -ni- 90/10) c 71500 (cu -ni- 70/30) uns no c 10100 c 10200 c 10300 c 10800 c 12000 c 12200 specification:- astm / asme sb 61 / 62 / 151 / 152
Stainless steel pipe flange
80 Per Piece
Lap Joint Pipe Flanges
Get Price Quote
Our name figures in the list of the topmost suppliers and exporters of Lap Joint Pipe Flanges from Mumbai, Maharashtra, India. We pride in having a team of well-qualified workers, who work hard to cater to the requirements our esteemed clients. While we process the Lap Joint Pipe Flanges using optimum quality materials, we are appreciated for manufacturing the Lap Joint Pipe Flanges with maximum perfection, and clients can purchase the flanges at reasonable rates in the market. The offered Lap Joint Pipe Flanges have a precise design, and excellent finish and these are appreciated for having a lustrous shine, and intricate detailing. Details : This is again similar to a slip-on flange, but it has a radius at the intersection of the bore and the flange face toaccommodate a lap stub end. The face on the stub end forms the gasket face on the flange. This type of flange is used in applications where section of piping systems need to be dismantle quickly and easily for inspection or replacement..
Stainless Steel 316Ti Flange
Get Price Quote
We supply Stainless Steel 316Ti Flange.
Mild Steel Blind Flange
Get Price Quote
1 Metric Ton (MOQ)
Nickel Alloy Flanges
Get Price Quote
We are engaged in providing quality tested Nickel Alloy Flanges at the market leading prices. The Nickel Alloy Flanges can be availed from us in various grades as per the specific requirements of the clients. Soured from authentic vendors, these Nickel Alloy Flanges are appreciated for their corrosion resistance and excellent finish. Attributes Of Nickel Alloy Flanges Corrosion resistanceHigh durabilityExcellent finishDimensional accuracyChemical resistance Grades ASTM / ASME SB 564 UNS 2200 (Nickel 200), UNS 4400 (Monel 400), UNS 8825 Inconel (825), UNS 6600 (Inconel 600), UNS 6601 (Inconel 601), UNS 6625 (Inconel 625), UNS 10276 (Hastelloy C 276)ASTM / ASME SB 160 UNS 2201 (Nickel 201)ASTM / ASME SB 472 UNS 8020 (Alloy 20 / 20 CB 3)
Nickel Alloy Flanges
Get Price Quote
10 Kilogram (MOQ)
Carbon Steel Flanges
Get Price Quote
Due to a vast experience and in-depth knowledge, we have emerged as a prominent Manufacturer and Supplier of Carbon Steel Flanges. These are highly demanded by various industries for specific applications. We offer them in various sizes and specifications, to meet the technical requirements of our clients. We use the pristine grade materials and pioneering techniques for manufacturing them. Our offered Carbon Steel Flanges are known for their durability, perfect finish, accurate dimensions, and sturdiness.
Stainless Steel Sheet
Get Price Quote
100 Kilogram (MOQ)
Stainless steel sheet & plates - 1) checkered tear drop polka drop. 2) mirror no. 8 finish 3) no.4 hair line. 4) etch pattern. 5) ti color & etched.
Stainless Steel Flanges
500 Per Piece
10 Piece (MOQ)
Filter by Localities
