Flareless Fittings Dealers in Mumbai

Both ends are tube and the assembly is with ferruleweld nipple. The joint is made by assembly of fittings with ferrule. A weld nipple can be used instead of a ferrule when it is required to join two pipes of an equal size. Tube to tube (equal fittings) : these fittings are generally known as “stud” couplings. Tube to threads (malefemale) : during installation, when a swiwelend is needed to fit with a fixed line, a special swiwel nut is provided which can revolve around the body but will not disengage. Swiwel connections are also available. Tube to swivel : these are used for high pressure applications an provide a 360º rotation facility. These fittings are mainly used for positioning the tube fitting line. The perforated hollow shaped bolts directly on the end pass through the spherical union body for fluid transfer. Banjo fittings : used to connect fittings with instruments. Tmi has a wide range of adaptors with different threads - metric, bsp, bspt, npt. Adaptors : port reducers, closing plugs, ferrules, nuts, o rings, u rings, elastomeric rings. Tmi fittings are available in light series: 4mm-8mm, medium 6mm-42mm and heavy series:6mm-38mm depending on the pipe size. Fittings with weld nipples are available only in heavy series.

• Material: Steel IS 226 Phosphate, Brass, SS304, 316.
• Pressures: Up to 10000 PSI.
•  : Size Range
• 4mm OD to 50 MM OD and in Inches 1/8” OD to 2” OD and 2” NB Size.:  

We bring forth a quality range of Flareless Tube Fittings in the market. Our range of Flareless Tube Fittings includes Flareless Tube Connectors, Flareless Tube Cross, Flareless Tube Elbow, Flareless Tube Tee, and Flareless Tube Union. Available in several styles, sizes, and shapes, these Flareless Tube Fittings offer very effective seal between the fittings and the flared tube. Also, these Flareless Tube Fittings are well known for their low torque operation and good vibration resistance.

   Dimension L1 is approximate length with tightened nut.•   The above part numbers are for complete fittings including Nut, Bite Ring and Body.•   Only body without Nut and Bite Ring are available on request.•   If you have requirements other than above size and Dimensions,    please contact us with complete details•   Dimensions are for reference only and are subject to change without notice.

Our expertise lies in successfully designing and manufacturing of Flareless Tube Fittings. We can deliver these in different designs as per the specific application demands. The range include Flareless Fittings, Flareless Bite Type Fittings, Union Fittings, Connectors, Elbow Fittings, Adapter Fittings, Tee Fittings, Nipple fittings, End Closure fittings, Cross Fittings and Nut & Ferrule fittings.

• Brand Name: FAV (TM)

We offer flareless tube fittings. introduction pioneer flareless tube fitting provide secure, tough, and reliable tube connection that provides exceptional leak-tight application. These flareless fittings are also known as jis bite type tube fittings or sae flareless fitting variety flareless tube fitting as per din 2353 are available in wide array of configurations are available such as straight connectors, elbows, union, tees, and crosses , adapters and various customized machined components of various styles , shapes and sizes. If you have special drawings flareless tube fitting send us to pionlace@vsnl.com how does pioneer flareless tube fitting work? pioneer flareless tube fitting consists of three-piece machined components (nut, ferrule, and body) .this system works by forcing the ferrule to cut into the tubing wall to create a leak tight seal. The ferrule is harder than the tubing to form the bite . Thus resulting in a very effective leak proof joint, full flow connection in process tubing .it is used in virtually every application that uses fluid power for motion control & automation. materials available flareless tube fitting or jis bite type tube fittings are available in stainless steel, brass, steel, monel, high duty bronze, hastelloyc, incoloy, inconel 600. manufacturing process flareless tube fitting are manufactured from cold drawn bar stocks and all angular fittings from neat forgings. Our focus on forged construction results in close grain structure and also gives extremely high reliability to our hydraulic fittings .the ferrule is slightly discolored because it has been heat-treated to give extra hardness for biting. The finishing on flareless tube fitting nuts is a dark graphite color. The fitting nut is designed to reduce torque and prevent galling. application flareless tube fitting is used in almost all application that involve fluid power for instrumentation and process control. However it is an excellent fitting system for higher vibration hydraulic systems where tube protection is critical pioneer flareless fitting has been specifically designed for use on instrumentation, process and control systems, together with equipment employed in chemical, chromatography, petroleum, power generation and pulp & paper plants. advantages of pioneer flareless tube fitting? variety of styles , shapes and sizes. Low torque operation. Very effective seal between the fittings and the flared tube good vibration resistance.

• Material: SS, MS, Brass
• Size: 1/8 to 2 in. (6mm– 38mm)
• Temperature Rating: Stainless: -425° to 1200°F

Flare-type fittings, were developed as an improvement over pipe fittings many years ago and probably remain the design used most often in hydraulic systems. Tightening the assembly's nut draws the fitting into the flared end of the tubing, resulting in a positive SEA l between the flared tube face and the fitting body. The 37° flare fittings are designed for use with thin-wall to medium-thickness tubing in systems with operating pressures to 3,000 psi.Because thick-wall tubing is difficult to form to produce the flare, it is not recommended for use with flare fittings. The 37° flare fitting is suitable for hydraulic systems operating at temperatures from -65° to 400° F. It is more compact than most other fittings and can easily be adapted to metric tubing. It is readily available and one of the most economical.

• Application: Structure Pipe, Gas Pipe, Hydraulic Pipe, Chemical Fertilizer Pipe
• Material: SS, MS, Brass
• Size: 1/4 inch-1 inch, 1 inch-2 inch, 2 inch-3 inch, 3 inch-10 inch, 10 inch-20 inch

ACE ALLOY LLP is one of the leading Flareless Nuts & Ferrule Fittings Manufacturer, Exporter & Supplier. We offer Nuts and Ferrule Fittings in different sorts, thickness, arrangement, strings and sizes. Our expertise lies in successfully designing and manufacturing of Flareless Tube Fittings. We can deliver these in different designs as per the specific application demands. The range include Flareless Fittings, Flareless Bite Type Fittings, Union Fittings, Connectors, Elbow Fittings, Adapter Fittings, Tee Fittings, Nipple fittings, End Closure fittings, Cross Fittings and Nut & Ferrule fittings.   Stainless Steel 304/304L Flareless Nuts & Ferrule Fittings, Stainless Steel 316/316L Flareless Nuts & Ferrule Fittings, Stainless Steel 904L Flareless Nuts & Ferrule Fittings, Inconel 600 Flareless Nuts & Ferrule Fittings, Inconel 625 Flareless Nuts & Ferrule Fittings, Incoloy 800/800H Flareless Nuts & Ferrule Fittings, Monel 400 Flareless Nuts & Ferrule Fittings, Monel K500 Flareless Nuts & Ferrule Fittings, Nickel 200 Flareless Nuts & Ferrule Fittings, Nickel 201 Flareless Nuts & Ferrule Fittings, Hastelloy C22 Flareless Nuts & Ferrule Fittings, Hastelloy C276 Flareless Nuts & Ferrule Fittings, Duplex Steel 2205 Flareless Nuts & Ferrule Fittings, Brass Alloy Flareless Nuts & Ferrule Fittings

"VIRGIN" makes single and double compresion tubes fittings which are designed manufactured for process and Instrumentation tubing which provides a leak proof torque free seal at all the tubing connections, thus eliminating hazardous and costly leaks.

• Thickness: 20-30 mm, 40-50 mm
• Type: Seamless, Welded, Fabricated, ERW
• Finish: Polished
• Usage: Industrial
• MOQ: As Per Customer Needs
• Condition: Cold Drawn & Polished Cold Drawn, Centreless Ground & Polished

Flareless Tube Fittings, Hydraulic Equipments, pneumatic equipments

flareless bite type fittings, PVDF Products, Boron carbide

Flareless Fittings, Bushings, Clamp Fittings, Oil Removal Filter

Flareless Tube Fittings, Manifold Valves

Flareless Tube Fitting, Seal Fitting

Flareless Fittings, instrumentation manifold valves

Flareless Fittings, Pipe & Tube Caps, cast flanges, Pn Flanges, Tube Flange