flocon industries Kandivali, Mumbai, Maharashtra

Softening is an ion exchange process used to remove ions from the water that contribute to alkaline scale formation, primarily calcium and magnesium. As water containing these ions passes through the softening resin bed, the ions are exchanged with sodium ions residing on the surface of the resin. When no more sodium ions are left for this exchange process, the resin must be regenerated. Regeneration is accomplished with a brine solution of sufficient strength to cause an exchange between the sodium ions in the brine and the calcium and magnesium ions on the resin. Once regeneration is complete, the resin is ready to begin the softening cycle again. Flocon Industries Water Softeners are designed for the removal of hardness, ammonia or both. The softeners are designed based on your effluent water quality required and the feed water analysis. Softeners can be provided individually or as part of a total water treatment solution. The control system for the water softener can be dedicated to the softener or part of a total system. Softener systems are designed specifically for your application using either fiberglass, PVC, lined carbon steel or stainless steel in the materials of construction.

The MGF works on principle of retention and removal of physical impurity in a graded manner through Voids of the filtering media. It is a kind of a deep filter bed with adequate pore dimensions for retaining both large and small suspended solids and un-dissolved impurities like dust particles. This arrangement produces a filter bed with adequate pore dimensions for retaining both large and small suspended particles. This filter performs at a substantially higher specific flow rate than conventional filters.It is also a low cost pre-treatment system for ion exchangers (deionizer and softener) and membrane systems such as reverse osmosis etc. With high throughputs, high dirt-holding capacity and capacity to reduce turbidity and TSS (< 5ppm) from water, it protects ion-exchange resins and membranes from physical fouling due to suspended impurities present in the water. Our company is a prominent manufacturer of multi grade filter in India and provides engineering services from designing, manufacturing to installation and commissioning. Our Multigrade sand filtration plants are designed to meet specific requirements of our customers; no matter what quality of water you use and what your flow rate requirements are, our engineering team is capable of configuring the same accordingly. From 1000 LPH to 50,000 LPH, we can manufacture and supply any capacity you need. MGF can be provided individually or as part of a total water treatment solution. The control system for the water softener can be dedicated to the softener or part of a total system. Softener systems are designed specifically for your application using either fiberglass, PVC, lined carbon steel or stainless steel in the materials of construction.

EDI systems remove ionized and ionizable species from water using electrically active media and electrical potential (DC power) to affect ion transport. By using this type of purification technology, caustic and acidic types of chemicals are not required. The water which has been treated by RO-EDI has typically exceeded customer's high-purity standards. Electrodeionization system is a continuous electro-chemical process of water deionization where ion specific membranes, mixed bed resin and a DC voltage across them, replace the standard hazardous acid-caustic chemical regeneration process. Electrodeionization (EDI) systems from Flocon Industries offer a cost-effective and sustainable solution for Generating High purity water with conductivity of less than 1 uS/cm. Our product range for EDI systems comprise of a large variety of reputed EDI manufactrers and flow rates. We provide EDI Modules of Ionpure / Snowpure / Qua / GE. Flow rates ofered are from 80 lph to 8000 lph with a single module and can achieve upto 20,000 lph by installing multiple EDI modules in parallel.

RO-EDI systems from Flocon Industries offer a cost-effective and sustainable solution for Generating High purity water with conductivity of less than 1 uS/cm. To suit the requirements of clients required product quality, Flocon Industries can design a system based on Hot water or chemical Sanitization RO-EDI. We also provide a wide range of flow rates from 80lph for laboratory and R&D Centres to 5000 lph required at large scale production facilities. Standard Features Complete system designed to meet current USP/BP/EU pharmacopoeia standards and cGMP requirements. Unit is completely piped, wired, and assembled on skid(s) at the factory Reduces installation costs and startup time. Highly effective cleaning system. 0.5 Ra SS316L Electro-polished permeate piping. Premium valves and instruments All required safety interlocks. Complete DQ/ IQ/OQ validation package with protocol execution support. Customizable to meet customer's specification requirements for Valves, Instrumentation and Mechanical devices. Heat sanitizable: hot water or steam arrangements available. Durable stainless steel construction. PLC based controls 304 Stainless Steel Skid Reliable Pretreatment solutions as per feed water parameters