Flow Meter Dealers in Bhandup West, Mumbai (22 products available)

• Brand Name: All Make
• Model Number: ALL
• Packaging Details: WOODEN & STANDARD
• FLOWMETER: 0.4-6lack

• The ideal instrument for IQ/OQ/PQ and troubleshooting• Accurate to 1% of reading with guaranteed linearity from 0.05 to 25.00 ml/min• Durable and easy to use with any HPLC pump• Easy diagnosis of leaking piston seals or malfunctioning check valves• Automatic Data Transfer- Dramatically simplify liquid flow rate data collection for HPLC IQ/OQ/PQ- Collect flow rate data via RS232 or with a new optional battery powered mini printer or with software• Specially design software converts data received in to pdf file. Average set of data & gives average reading, mean valuestandard deviation & many more PCI is pleased to introduce the FlowCal 5000 ​Models Availible-  Name - LFM-01 Calibration Point - Single Calibration at - 1.0 ml / min Name - LFM-02 Calibration Point - Three Calibration at - 0.5, 1.0, 2.0 ml / min Name - LFM-03 Calibration Point - Four Calibration at - 0.5, 1.0, 1.5, 2.0 ml / min  **Five Point Calibration Also Avalible The new instrument measures liquid flow over a wide range, from 50μl/min to 25ml/min. You can see the working flow ranges and accuracy in the table below. Flow rate is measured by volume and is independent of the liquid type up to a viscosity of 10 centipoise.The unit uses a single chip micro-controller, the flow rate (rounded to four digits) is displayed on a large four digit back-lit Liquid Crystal Display (LCD) and data can be conveniently output via the built-in RS232 interface to the full 6-digit reading. No user calibration is required; the unit is generally supplied gravimetrically calibrated at 1.0 (+10%) ml/min. Calibration at multiple points is available. All wetted parts are made of PTFE , PEEK, DAI-EL PERFLOUR or Pyrex glass. There are no wetted metallic parts. Three modes of operation are available:• Printer Mode: liquid flow readings are displayed on the LCD and output to a printer if one is connected. A running average option is available in this mode• Terminal Mode: in this mode the liquid flowmeter is controlled by the terminal or PC. Extra commands for averaging any number of readings are included.• Test Mode: this mode allows the user to test the display, valve and RS232 interface and also display the calibration date. The RS232 output allows the flowmeter to output data to any device fitted with an RS232 serial interface e.g. printer, terminal or personal computer. The unit is supplied with an RS232 cable fitted with a nine way female plug to connect directly to the COM port of a PC. By using the Terminal or Hyper-Terminal program supplied with MS Windows results can be collected and displayed or pasted into Excel or other programs to produce graphs or statistical analysis. The baud rate is internally switch selectable for 19200, 9600, 4800, 2400, 1200, 600, 300 baud with the option of sending a CR/LF after each reading. X-on / X-off handshaking is used. All instruments are supplied with the following:• Mains ‘wall block’ power supply with a choice of 240v 3 pin UK, 230v 2 pin European or 100v 2 pin USA/Japan.• RS232 input/output cable: 8way mini-din plug to PC COM port 9 pin female.• UKAS traceable single point flow calibration certificate is supplied as standard (UKAS is the UK equivalent of NIST)• Universal mounting kit: allows free standing mount, wall mounting, ‘stack system’ mounting and bottle top mount.• Black plastic carrying case with foam inserts. All parts of the mounting kit are packed within the carrying case.• Cleaning kit now supplied with the flow meter. FlowCal 5000 Specifications• Reading Update Time- 15 sec @ 2 ml/min- 25 sec @ 1 ml/min- 45 sec @ 0.5 ml/min• Measuring Volume - 140 μl• Priming Volume - 250 μl• LCD Display - (12.7mm)- 4 digits and 3 status symbols• RS232 output - (6 digits) XX.XXXX ml/min• Size - 138mm x 76mm x 45mm• Weight - 320g, 12 oz

Specification: Microcontroller with alpha numeric key pad having built-in temperature controller with temperature range up to 400 degree centigrade, resolution of 0.1 degree Centigrade and accuracy of +/- 0.1 degree Centigrade similarly built-in timer with range 999.9 seconds. Piston Travel: Up to 25 mm & resolution of 0.02 mm. Specimen cutting: Motorized. Specimen Weighing: Automatic up to 60 gm and resolution of 1 mg. Weight: 0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg & 21.6 kg hard chrome plated weights. Digital Display: Individual MFI, MVR, Melt Density results & average results. PC output: Through serial port with Window 7 compatible software. Accessories: Standard accessories*. Paint: Powder Coated. Power Supply: 230 Volts, 50 Hz, Single Phase.

• Battery: 2-AA
• Operating Temp Range: 0 - 48 Degree Celsius

Open channel flowmeters measure the flow of liquids that are open to the atmosphere at some point in the measurement system.

• Accuracy: ±0.8%
• Repeatability: ±0.2%

A flow meter is a device used to measure the flow rate or quantity of a gas or liquid moving through a pipe. Flow measurement applications are very diverse and each situation has its own constraints and engineering requirements. You can measure flow through a variety of different devices such as Coriolis and positive displacement meters.  

Technical Specifications : * Flow Range : DFM-01 : 1 mlmin. to 50 mlmin. with least count of 0.1 mlmin DFM-02 : 5 mlmin. to 500 mlmin. with least count of 1 mlmin DFM-03 : 200 mlmin. to 2000 mlmin. with least count of 1 mlmin DFM-04 : 1 mlmin. to 500 mlmin. with least count of 0.1 mlmin (auto range) DFM-05 : 1 mlmin. to 1000 mlmin. with least count of 0.1 mlmin (auto range) DFM-06 : 10 mlmin. to 400 mlmin. with least count of 1 mlmin (auto range) * Accuracy : ±2% of Reading, ±1 Digit * Power Supply : 230 V AC, 50 Hz, 10W * Resolution : 0.1 mlmin. & 1 mlmin * Dimensions : DFM- 01 : 27 cm (H) x 13 cm (W) x 10 cm (D) DFM- 02 : 27 cm (H) x 13 cm (W) x 10 cm (D)

HPLC Liquid Flow Meter, Digital Rotameter, Halogen Lamp

• Power: 230 Volts, 50 Hz, single phase.
• Timer: Digital presettable with a range up to 999 seconds and having buzzer output.
• Sample cutting: Manual.
• Weights: 2.16 kg & 5 kg.
• Accessories: Standard accessories*.
• Paint: Powder coated.

Computerized Melt flow index tester As per ASTM D 1238 & ISO 1133 – (Test Method A & B) to check the melt flow rate (MFR) & melt volume rate (MVR) of thermoplastics and compounds with automatic result.

We offer Flow meters with accuracy & reliability for metering liquid viz. Water, Petroleum, Chemical, Liquids etc. *Various Connection Types and MOC available.

As per ASTM D 1238 & ISO 1133 – (Test Method A & B) to check the melt flow rate (MFR) & melt volume rate (MVR) of thermoplastics and compounds with automatic result. Specification: Microcontroller with alpha numeric key pad having built-in temperature controller with temperature range up to 400 degree centigrade, resolution of 0.1 degree Centigrade and accuracy of +/- 0.1 degree Centigrade similarly built-in timer with range 999.9 seconds. Piston Travel: Up to 25 mm & resolution of 0.02 mm. Specimen cutting: Motorized. Specimen Weighing: Automatic up to 60 gm and resolution of 1 mg. Weight: 0.325 kg, 1.2 kg, 2.16 kg, 3.8 kg, 5 kg & 21.6 kg hard chrome plated weights. Digital Display: Individual MFI, MVR, Melt Density results & average results. PC output: Through serial port with Window 7 compatible software. Accessories: Standard accessories*. Paint: Powder Coated. Power Supply: 230 Volts, 50 Hz, Single Phase.  

electronic flow meter, barrel dispenser, Pressure Tank, Vane Type Air Motors

Flow Meters, Membrane Filter Holder, HPLC Peek Tubing, filter flask

Oval Gear Type Positive Displacement Flow Meter, Piston Type Air Motors

Flow Meter, flow meter maintenance services, industrial pump installation

Flow Meter, Engineering Tools, Cable Connectors, Marine Chilling Compressor

flow transmitters, Transmitter, Flow Transmitter, dcs systems

Flow Indicators, Reflex Gauges, Transparent Gauges

Flow Measuring Transmitter, Sniffer Bc Gas Leak Detectors

instrument flow meter, pressure transformer

Gas Flow Meters, Gas Meters, Gas Regulators