Flow Meter Dealers in Mulund, Mumbai

• Certification: ISO 9001:2008 Certified
• Condition: New
• Frequency: Flow Reading
• Automatic Grade: Automatic
• Feature: Easy To Use
• Feature: Strong Construction, Minimal Maintenance, Optimum Functionality
• Use: Used for Evaluating the Flow Properties of Molten Plastics
• Quality: Optimum Quality

We offer a wide range of Melt Flow Index Tester widely used to determine the melt flow index of plastic material. This system is structured with a heated extruder tube, an interchangeable jet and a piston with dead weights. This piston is used to apply the required pressure on the material inside the carbon steel extruder tube. A Bend Heater is affixed around outer circumference of the extruder tube and is used as an effective heating material. This heater is covered with a mineral wool insulation. The extruder tube is installed with a PID controller to indicate & control the temperature. Manufactured in accordance to the ASTM D 1238 & equivalent standards, this range of testers is available in various models with different parameters.Construction of the metal flow index tester: The assembly is fixed on a rigid stand. The bottom of the tube is lagged with an insulation of PTFE to prevent sticking of the extrudate The jet through which the extruder is pushed out is made from hardened and ground die steel The piston made from silver steel relieved at the upper end is provided to push the extrudate out of the jet. The piston moves inside the cavity of tube. A sleeve to provide to guide the relieved portion of the piston The plate-form is thermally insulated from the load. The extruder tube assembly is mounted on a metal box. A sheet metal control panel is mounted on the side of the equipment & houses the PID Controller, digital preset timer & other electronic components. Cleaning tools for tube cavity, jets, stoppers and cutters for the extrudate are also available with the equipment. The top of the piston carries a plate-form for keeping the load on.

Oxygen Flowmeter with Rotameter and Humidifier bottle

We offer a wide range of Melt Flow Index Tester widely used to determine the melt flow index of plastic material. This system is structured with a heated extruder tube, an interchangeable jet and a piston with dead weights. This piston is used to apply the required pressure on the material inside the carbon steel extruder tube.

SIGMA's Sight Flow Indicator (Flow Glass) are designed to facilitate instant visual indication of liquids flowing through pipes even from a distance. Visual inspection and proper control of vital areas are important in processes for proper operation of well-designed plants. These are available in various types such as Flapper, Drip Lip, Full View, Elbow etc. with Double or Single windows in Flanged or Screwed and other end connection. For ease of installation, Flanged Type for sizes 3" and above are preferred

We are offering electro magnetic flow meters. Haris electromagnetic flow measurement system, takes care of all your flow measurement and monitoring needs with maximum efficiency. The system comprises of a magnetic flow tube and an electronic flow converter. Specially designed flow coils, generate a magnetic field in the flow tube. As the conductive fluid moves in this field, voltage proportional to the the velocity of fluid is generated in the electrodes. This voltage is received by the flow convertor, and digital signal processing is done before the flow value is displayed in the illuminated alphanumeric lcd.

• Usage/Application: industrial
• Packaging Type: standard
• product: digital orifice flow meter
• Features: Uses solid state pressure sensors and Temperature sensor, Microprocessor based electronics

A flow meter is a device used to measure the flow rate or quantity of a gas or liquid moving through a pipe. Flow measurement applications are very diverse and each situation has its own constraints and engineering requirements. You can measure flow through a variety of different devices such as Coriolis and positive displacement meters.  

• Material: Plastic, Metal
• Application: Industrial
• Color: Black
• Voltage: 220 V, 240 V, 24
• Display Type: Analouge
• Frequency: 50 Hz, 60 Hz
• Packaging Type: Box, Carton
• Power Source: Electric
•  Type: Impulse Counters
• Product Name: MEM 201

Model: fr1118p10 the sotera in-line digital meter is an economical choice for metering the transfer of water, diesel exhaust fluid (def), or detergents. It's easy to handle and easy to use. It can be installed in line or at the end of the hose. using a turbine measuring system, the fr1118p10 provides the ability to dispense liquids with convenience and accuracy, and the five-digit lcd readout is a consistent performer under the toughest conditions. when you need a value priced meter, look no further than the fr1118p10. features and benefits 3 - 26 gpm (11 - 98 lpm) 70 psi (4,8 bar) 1 in. Npt inlet and outlet five digit readout with resettable totalizer +- 1% accuracy turbine measuring system one year warranty install either in-line or at the end of the delivery hose made out of nylon 66 measures in gallons, liters, quarts and pints compatible with water, diesel exhaust fluid (def), or detergents documents

Quick and easy powder flow analysis is now possible with the Powder Flow Tester provided by us. Whether you need to predict powder flow in R & D for new formulations, or perform a QC check on incoming materials and final products, the Powder Flow Tester offered is best in terms of both quality and pricing. We have established a track record for supplying top quality Powder Flow Testers.

• Material: Metal
• Application: Hospital
• Tube: Polycarbon
• Accuracy: 100%
• Capacity: 0-15 ltr/min

Ultrasonic flow measurement is among the best & most accurate technology available these days. It is widely accepted & prominently used across the industries due to its non-cohesive nature with the flow media. It is also non-effected in high magnetic field zones, where other technologies like electromagnetic & Boltzmann’s turbine technologies might have a challenge.Our Shenitech ultrasonic flow meters work on Transit time principle which ensures high accuracy. Our ultrasonic flow meters  are   used  not  only  for  domestic water application but also in dirty water having high TDS, in Sewerage treatment & effluent treatment application.   Transit time principle is annotated as below.   “It is the time difference taken by two UH frequency pulses to reach the diametrically opposite ends of the pipe, which is related to the velocity of the fluid media inside pipe in direct proportion”Suppose ‘T1’ is the time taken by pulse to travel downstream to the flow of media & ‘T2’ is the time take by the pulse to travel upstream of the flow media moving unidirectional with velocity ‘v’ , then time difference ‘δT’ is related to velocity as   Benefits & Features:   Low maintenance as no moving parts High Accuracy as high as ± 1% OIML R49 standard. CE Approval Low pressure drop Tamper Proof Design Low Cost Over long run We have all types of sensors option available as far as mounting is considered. The sensor selection is generally depend upon the application & site conditions. We recommend to take our expert advice before making selection of appropriate sensor.

We are offering argon gas flow meter, acrylic panel gas rotameter flow meter for argon. Rushila make high accuracy, clear acrylic plastic body low flow acrylic flowmeter uses tapered tube drilled directly in acrylic plastic body itself, acrylic plastic is highly stabled and chemical resistant and gives glass like clearness which enables clear visualization of flow. In acrylic body rotameter, flow range is calibrated, engraved and coloured with black on body itself for long lasting durability. Acrylic body low flowmeter are generally used for purging and used for chlorination of gases

Calibration, TEAR CUTTER, Izod Impact Tester, Inclined Impact Tester

Double Window type Sight Flow Indicator provides durable, quick reliable & economical way to verify the flow of liquids through industrial process lines. The round glass window area is large enough to provide better visibility.  These are available in single window or double window constructions,   Investment Casted or fabricated body & cover plate & the use of the toughened soda lime glass windows combined with selected seals which fit correctly in to properly machined seats which results in unusually high pressure ratings for double window sight flow indicators. This can also be used on vacuum applications. The glasses can be individually removed & replaced in this design. It's smooth internal passage offers very little registrance to flow These are available in plain models, rotator, flapper, drip tube types. Jacketed type also can be provided for heating & cooling applications. Available sizes 15 MM to 200 MM in all types of flanged & threaded process connections. Toughened borosilicate or Plexi glasses can be supplied optionally. Max. op. Temp. 200°C .     Features : * Light weighted investment casting body aliminates the need of heavy pipe support and also reduces stress corrosion. * Blow hole free investment casting body.  * Electo polish finish for better registance to sarface corrosion.

• Brand Name: Flowtech
• Material: Brass
• Packaging Type: Box
• Display: Digital
• Color: Blue
• Accuracy: Perfect
• Application Media: Any Liquid
• Usage/Application: Automotive
• Power Supply: Standard

For all types of Flow Measurements TEMP TECH manufactures Flow elements to suit to the requirements of the clients. The Bore diameter (Sizing) calculations are computerized and done in house as per ISO-5167 BS- 1042. Flow elements wherever required are individually calibrated and supplied. The calibration is done at FCRI IIT and calibration certificates are provided.

• Type: Squid
• Application: Cooking
• Type: Poultry
• Feature: Frozen
• Condition: Frozen
• Packaging Type: 5kg, Customized
• Part: Cutting

We are the main supplier of this product.

This meter is more suitable for effluents,slurries, pulps, molasses & other highly corrosive liquids   Line Size:Between 15 NB TO 100 NB   Flow Ranges:600 TO 60000 LPH OF WATER   Output: 4 - 20 mA LEVEL SWITCHES & CONTROLLERS

Oval gear flowmeter , with an accuracy better than Suitable for MDO,LDO,LSHS,Blended Oils for temperatures upto 150°C Optional Pulse / analog signal outputs ( Exia IIC T5 rated ) available for remote monitoring. Available for various viscosity ,specific gravity, flowrate & pipeline sizes.

The inline flow meter EE771/EE772, based on the measurement principle of thermal mass flow, is ideally suited for the measurement of flow in pipelines DN15 (1/2”) up to DN80 (3”). Measurement of for instance the usage of compressed air, nitrogen, CO2, oxygen, helium or other non-corrosive, non-flammable gasses. The flowmeters are setting new standards in terms of measurement accuracy and reproducibility thanks to their applicationspecific adjustment during production. As such, the EE771/EE772 is adjusted under a pressure of 7 bar. The unique mounting concept with a mounting valve permits rapid installation and removal of the device for periodical calibration. It simultaneously ensures high measurement accuracy through exact and reproducible positioning in the pipe. Features high accuracy ± 1.5% of reading exceptional reproducibility quick sensor exchange at line pressure broad working range of 1 : 400 very service friendly Bus interface for Modbus RTU or M-Bus Applications Measurement of consumption of compressed air Compressed air counter Mass flow measurement of industrial gases

flow transmitters, Speed Governor, flow measurement systems, RPM Indicators

Magnetic Flow Meters, Temperature Transmitters

Sight Flow Indicators, flame arrestors, flange guards, Level Indicators

Sight Flow Indicators, Rotameters, Bolts, Thermocouple, Hydraulic Fittings

Flow Meter, Dew Point Meter, moisture measurement products

f sight flow indicator, f level indicator, Rotameter

Coriolis Mass Flow Meter, electronics services, PLC- Mitsubishi

flow measurement, Liquid Analysis, Digital measuring cable