Fluid Heater Dealers in Mumbai

TECHNICAL SPECIFICATION i - Type – Vertical/Horizontal, 3 pass, Coil Type Thermic Fluid Heater ii - Capacity – 50000 kcal/hr to 2500000 kcal/hr and above iii - Temperature - Up to 300°C and above iv - Fuel - Gas / Diesel/Heavy Oil/ Dual Fuel v - Thermal Efficiency - 88% + 1% based on N.C.V. of Fuels vi - Heat Recovery Unit – Economiser (Optional) vi - Air Preheater - In-built     OPERATION i - Fully automatic operation with BURNER ON-OFF modulation for units up to 40 Lac kcal/hr and HIGH-LOW ON-OFF modulation for higher capacity units keeping FUEL CONSUMPTION in proportion with heat demand in the plant ii - The Burner is pressure atomizing type and is centrally located at the top of the unit iii - Burner is self igniting and maintains CLEAN and SMOKELESS COMBUSTION all throughout the operation iv - Preheated combustion Air gives highest Combustion efficiency maintaining high CO2 % and Low Smoke Index v - Hot Oil circulation pump is of centrifugal type maintaining the circulation of Hot Thermic Fluid through heating coil vi - A Digital Temperature Controller senses the heat demand in the plant and controls the Burner ON-OFF/HIGH-LOW modulation maintaining minimum fuel consumption vii - In case of any abnormal operating condition the SAFETIES provided stop the unit and put the same to SAFETY LOCKOUT CONDITION by giving AUDIBLE ALARM and VISUAL INDICATION     SAFETY FEATURES i - Flame failure device ii - Thermic Fluid low flow tripping iii - Overriding temperature tripping iv - Blow down valve v - Single phasing prevention cum over load for control circuit vi - Miniature Circuit Breaker for control circuit vii - Thermic Fluid level switch on expansion tank (optional) viii - High stack temperature Annunciation/Alarm (optional) ix - Fail Safe Instrumentation x - Control circuit logic ensures Heater going to lock out safety in case of any abnormality in operating condition as well as monitoring instrument failure

ENERGYPACK gas fired thermic fluid heater are designed with unique liquid sealing arrangement to prevent oxidation of thermic oil, which increase the life of oil. Gas fired thermic fluid heater are fabricated in both vertical & horizontal design as per the client requirement & availability of space. Standard Operating Temperature up to 300 C.

The Thermic Fluid Heater that we offer our clients is sourced from trusted vendors. Our fuel fired thermic fluid heater is easy and safe to handle, as it is incorporated with various safety measure equipment. They need low maintenance and provide long lasting brilliant performance even in tough weather conditions. Salient Features Fully automaticEasy operation & fail proof systemOutside the purview of IBR100% depreciation in the first yearHigh efficiency Technical Specifications Capacities from 50,000 Kcals/hr to 10,00,000 Kcals/hrMaximum operating temperature of 300oCOver all efficiency of 88%± 1% on N.C.VFour heat transfersEfficient combustion, forced circulation, liberal heat transfer areas & large furnace volume Specifications DetailsUnitNT-50NT-100NT-200NT-300NT-400NT-600NT-1000Operating Parameters CapacityKCals/Hr.500001000002000003000004000006000001000000Max. Operating Temp. (At the outlet of the unit)0C300300300300300300300Fuel Oil Consumption At full load LDO FOKgs/Hr Kgs/Hr.5.410.821.522.632.433.942.94564.367.5107.2112.5Efficiency (GCV)%86+/-186+/-186+/-186+/-186+/-186+/-186+/-1Burner Contro-------------------------ON-OFF------------------Electric SupplyAC-3 Phase - 415V +/- 6% 50 Hz 4 WireThermic Fluid Pump Motor(HP)357.510102025Blower Motor(HP)11.5223510Fuel Oil Preheater (For F.O. Fired Unit Only)KW--34.54.569Total Elec. Load For LDO Fired Units For FO Fired UnitsHPHP + KW46.59.59.5+31212+4.51313+4.52525+63535+9Length(Mts)2344444Width(Mts)2344455Clear Height(Mts)2.52.545556Fuel Gas Outlet(MM)25025025030030400500Cross Dry Weight(Kgs)1000135017502400290035005250PARAMETERSUNITNTC : 200NTC : 300NTC : 400NTC : 600NTC : 1000--Heat OutputKcal/hr2,00,0003,00,0004,00,0006,00,00010,00,000--Outlet temperature (max)0C300300300300300--Temp rise ( T) in the heater0C2525252525--Pressure at heater outletKg/cm22.22.22.52.52.5--Flue gas duct diametermm250300300350450--Inlet / Outlet connection of heatermm50506565100--FUEL CONSUMPTIONCoalKgs/hr6496128192320--WoodKgs/hr87130174260435--ELECTRICAL LOADThermic Fluid Pump MotorKw5.55.57.511.015--I.D. fan motor + F.D. fan motorKw1.5+0.3752.2+0.752.2+0.753.7+1.55+2.2--Total Connected LoadKw7.3758.4510.4516.222.2-- Designs and Specifications subject to changes due to constant research and developmentThe efficiency is guaranteed on the test bay with commercially clean internal and external heat transfer surfaces

• Material: Mild Steel
• Certification: CE Certified
• Application: Industrial
• Orientation: Vertical
• Usage/Application: Heating
• Quality: Optimum Quality

Fluidtherm, Thermic fluid heater, consists of two concentric coils in which inner coil acts as a radiation zone and outer coil act as a convection zone.Flue gas velocity is generally higher between the 2 coils and between the coil and the outer shell, so higher the velocity higher will be the convective heat transfer between the flue gas and fluid.Thermic fluid heaters can be made either 3 pass or 4 pass depending on the design of thermic fluid heater and the type of fuels to be burnt. The efficiency of the heater increases with an increase in the number of passes.Working Process Of Thermic Fluid Heaters :The maximum temperature of 350℃ of thermal fluid can be achieved in a Fluidtherm although the higher temperature of the thermal fluid can be achieved provided the temperature of fluid does not exceed the auto-ignition temperature. Thermic Fluid Heater also consists of a deaerator and expansion tank.The density of fluid decreases with increase in the temperature of fluid so a tank is generally installed in a process to help accommodate the extra volume of fluid which is increased due to increase in the fluid temperature. For every 100℃ rise in the fluid temperature, the volume of fluid increases by 7% so expansion tank is added to take care of that extra volume.Deaerator tank is combined with the expansion tank and is generally used to vent out air from the fluid which acts as resistance in transferring heat to the fluid. Industrial Thermic Fluid Heater Fuels.Fluidtherm, Thermic heating system made by used to burn the different type of fuels such as:-Solid Fuels : Wood, Coal, Petcoke, Rice husk, etc.Liquid Fuels : Light Diesel Oils, Heavy Oils, etc.Gaseous Fuels : Natural Gas, Liquefied Petroleum Gas, etc.Advantages of Thermic Fluid Heaters: High Capacity Heating System Fully automatic unit – Maintains the desired temperature of the thermic fluid High System Efficiency – Reduced operating cost. Best applicable for High-Temperature Heating Can attain temperatures upto 300 o C Minimum site work and ease of installation Can operate on the variety of fuels as per local availability Failsafe design and dependable safety instruments Rugged design and superior construction High flow rate ensures the higher life of thermic fluid and heater coil Backed by prompt and efficient after sales service Deaerator/Expansion Tank Integral Arrangement type Fluidtherm Capacity Fluidtherm is available in capacities from 1 Lac Kcal/hr to 10 Lac Kcal/hrQuality:Our Thermic Fluid Heaters and Steam Boiler has best Quality of inputs like Seamless Pipes for coil, High Tensile Fasteners, SS Reflector Shell, and other components are bought from best of the brands like Siemens, Bharat Bijlee, Finolex, English Electric, fenner, Indofoss. Thereby making these units very strong and long lasting.

• Type: Thermic Fluid Heater
• Material: Alloy Steel, Metal, Mild Steel
• Application: Domestic, Industrial, Machinery
• Weight: 100-1000kg
• Automatic Grade: Automatic, Fully Automatic, Semi Automatic
• Feature: Double Chamber, Noiseless Operation
• Temperature: 100-150°C

Being one of the prominent Industrial Thermic Fluid Heater Exporters, we seek to provide Thermic Fluid Heater at extremely economical rates. Our superlative Thermic Fluid Heater is available in the capacity of 100000 kcal to 10,000,000 kcal. Our Thermic Fluid Heaters are made up of high quality raw materials, which add durability. Compact in design, our Thermic Fluid Heater is widely demanded in Tanzania, Oman, and Malaysia. Our Electric Thermic Fluid Heater assists in the fuels such as LDO, Furnace Oil, HSD, Natural Gas, Coal, Agro Waste, Wood, etc.

Viscon Fluid Heaters  High performance fluid heatersProvides excellent temperature conditioning for high solids coatings and high viscosity materialsGraco's Viscon heaters maintain optimal temperatures to provide consistent control of fluid viscosity. With a wide temperature operating range, Viscon heaters are excellent for any coating, sealant, adhesive or lubricant you need to pump.Viscon HF High Flow Fluid Heaters- Designed for high flow rates, with more power for faster material heatingViscon HF Fluid Heaters for Explosive Atmospheres- Developed to handle the highest viscosity coatings such as 100% solids epoxies coatings and epoxy fireproofing materialsViscon HP High Output Fluid Heaters- Offers high pressure (7250 psi/500 bar) for use with most pumpsFeatures:Viscon HF High Flow Fluid Heater:Spiral passages provide three times the flow rate of standard Viscon heatersEfficient and powerful for faster material heating - gets the job done fasterAvailable in manual thermostat or externally controlled versionsExcellent for high solids coatings and protective coatings materialsEasy to clean and maintain7250 psi (500 bar, 50 MPA)Temperature operating range: 84 to 219°F (29 to 104°C)Viscon HF Fluid Heaters for Explosive Atmospheres:The patent-pending design has a triple-path spiral core that can be easily disassembled for cleaning.Increased flow capacity: The Viscon HF has over three (3) times more flow capacity compared to the standard Viscon HP heaters.  Increased heat capacity: The Viscon HF heaters have 35% more wattage; 5400 watts compared to 4000W for the standard Viscon HP heaters.Available in manual thermostat or externally controlled versions.Cleanable and replaceable fluid core – repair instead of replace.7250 psi (500 bar, 50 MPA) pressure rating – handles the highest pressure rating of Graco protective coating sprayers.Temperature operating range: 84 to 219°F (29 to 104°C)Same mounting configuration as standard Viscon HP heaters – Easy to retrofit onto existing equipment.Viscon HP High Output Fluid Heater:Higher pressure for use with most pumpsExcellent for high solids coatings, adhesives or resins7/16 in (11 mm) diameter fluid passagesStainless steel designAvailable in standard or explosive atmosphere versions7250 psi (500 bar, 50 MPa)Temperature operating range: 84 to 219°F (29 to 104°C)

Energypack external furnace horizontal coil type fored circulation with id & fd fan for solid fuel firing sysytem having higher furnace volume & grate area to burn low calorific fueal.      

We are looked upon as the most reliable Manufacturer of Thermic Fluid Heaters in India. We specialize in manufacturing Oil Fired Thermic Fluid Heaters. Moreover, our Gas Fired Thermic Fluid Heaters are extensively demanded in the market as the product is competent to handle temperature over 300ºC, in liquid or vapor or both combined phase. Some of the notable features of the Thermic Fluid Heaters are as mentioned below: Low Temperature Differential : It is an important parameter in achieving higher temperature. It minimizes user equipment cost and boosts production. Maximum Fluid Life :Our superior design offers large heat transfer area, high thermal fluid velocity & generous furnace volume. The fluid film temperature is restricted close to the bulk temperature. High Efficiency :Our exclusive design leads to effective and controlled combustion, low exit gas temperature cuts down the energy consumption / energy costs substantially : Prime material & components used in our TFHs pass through uncompromising quality checks. Thus, they are rugged & perform to the optimum level. Dependable : Prime material & components used in our TFHs pass through uncompromising quality checks. Thus, they are rugged & perform to the optimum level. Safe & Simple : A range of controls & safety devices ensure risk - free operation. The equipment starts up with the flick of a switch. Standard Operating Capacity Range : 10,000 – 20,00,000 kcal/hr Fuel : Light / Medium / Heavy Oil, Natural Gas, Solid Fuels. For Solid Fuels, a special furnace is provided Applications Chemical Process Heating Converters, Calendering, Hot Presses Hot water / Steam generation Paints & Resin kettle heating / cooling Petroleum Refining Rubber, Plastic & Paper Processing Space heating for hotels, public buildings Surface curing, coating & drying / baking ovens Tankers, Barge, Tank farm heating Waste Heat Recovery Plant

• operating temperature: 300°C
• range of capacities: 50,000 Kcals/hr to 15,00,000 Kcals/hr

Neotherm is an oilsolid fuel fired thermic fluid heater in vertical horizontal design having four heat transfer to ensure optimum efficiency. It ensures that maximum of its heating surface is exposed to radiant heat there by ensuring excellent thermal efficiency. Efficient combustion, forced circulation, liberal heat transfer areas & large furnace volume ensures over all efficiency of 88%± 1% on N.C.V.NEOTHERM is available in wide range of capacities from 50,000 Kcalshr to 15,00,000 Kcalshr at maximum operating temperature of 300°C.

This design gives highest efficiency ever. The Thermic fluid heater is of VERTICAL construction with Two concentric large diameter helical coil & shell assembly, placed directly on top of the combustion furnace. This ensures that the intense luminous heat of the flame is fully utilized. This is the first, Radiative section comprising of the first 3 passes of hot flue gases.   These gases from radiant coil are then made to pass through a second, convective heat exchanger. This is again made of twin concentric helical coils, placed inside a sturdy M.S. shell having two more distinct passes of hot gases, making the total passes of Flue gases inside the TFH to FIVE. Thus maximum amount of heat is extracted from the flue gases. The gases are then made to pass through the Air prehater & Mechanical dust collector, on way to the chimney through I.D.Fan. A generously designed refractory lined external furnace is provided to ensure high furnace volume and grate area and can ensure rated output on low-grade coal and can easily burn most other fuels such as Lignite, Paddy husk, Fire wood, Bagasse, etc, without any modifications.   The Safety controls and instrumentations provided ensure completely safe operation and provide Audio Visual Alarm and cuts off the combustion in case of abnormal operating Conditions.

Capacities available from 1,00,000 Kcals/hr to 40,00,000 Kcals/hr. Thermodynamically optimized, high efficiency, low maintenance/operation cost Fuel firing - light/heavy oil, gas, dual fuel.

  We are one of the leading  Electric Thermic Fluid Heater Manufacturer in India. Our Electric Thermic Fluid Heaters are fully automatic in mode and thus very easy to operate and control. They are offered in both vertical as well as horizontal coil types. Our Thermic fluid heaters are highly efficient because the elements are totally immersed in thermal fluid and the jacket is fully insulated with high density insulation. The ETFH is designed and manufactured using high quality heating elements, precise dimensions in a state-of-the-art manufacturing facility. Our quality control guarantees highest safety and long life span. The main difference between this heater and a gas or steam boiler is the energy source which used to heat the thermal fluid upto the required temperature. While a gas, oil or diesel boiler has a burner which sprays or injects the fuel, in case of electric thermal fluid heaters, there is no flame as the heat is provided by electrical resistors.  Use of low Watt density flanged electric heaters maintain low heat flux densities. The surface area provided is generously sized to keep thermic fluid film temperatures low, which protects the thermic fluid from carbonizing.   Our electric thermal fluid heaters are supplied as a compact unit on a platform containing all equipment components like Heater unit , thermic circulating pump, various isolating valves, its interconnecting piping etc including the expansion tank. These heaters are suitable for upto a maximum temperature of 300 deg centigrade.They are available from a range 6 KW to 120 KW.

• Fuel: Coal, Wood, Briquette etc.,
• Type: Vertical 4 Clear Pass
• Capacity: 100 Kgs/hr to 1000 Kgs/hr
• W.P.: 10.54, 15 & 17.5 KG/CM²
• Thermal Efficiency: 75 ± 2% on NCV
• Features: Fully automatic, Instant steam, Compact, Light weight, High thermal efficiency, Low operating cost  

SALIENT FEATURES • Low intial & operational cost. • Beyond perview of IBR • Quick start up and stopage • No explosion Hazard • System piping is NON IBR & Low pressure so less expensive • Higher thermal Efficiency 4 pass design • Dependable parts, longer life • Easy trouble free operation • Smokeless combustion • Wide temp. setting range • Available in Horizontal/Vertical versions   CONTROLS • Electrical control pannel box mounted on the boiler cell consists of contactors, relays and cut outs for blower, circulating pump and fuel pump. Burner programmer prepurging timer, ignition transformer, indicating lamps, temperature controler, pressure gauges, low flow Diff. pressure switche, control switches and power ON/OFF main switch   SAFETY • Boiler shuts down giving an audio visio alarm in the event of low liquid lflow , high outlet temperature, low liquid level, erratic flame or flame failure.Dead wt.safety damper for venting off pressure build up inside combustion chamber.   BURNER • Fully automatic down /side fire forced draught pressure jet ON/OFF /High Low control with audio visual alarm device in the event of flame failure or safety lockout.

thermal fluid heaters

Oil Fired Thermal Fluid Heaters, Oil & Gas Fired Steam Boilers

The General Trading & Mfg. Co. based in Mumbai is manufacturing and supplying of a wide range of thermic fluid heater in India.

thermal fluid heaters, gas fired boilers, Oil Fired Burners

Gas Fired Thermic Fluid Heater, Thermic Fluid Heater

Thermic Fluid Heater, Drum Flakers, Oil / Gas Industrial Steam Boilers

Thermic Fluid Heater, non ibr boilers, modulating motors, burner guns

Thermic Fluid Heater, Boilers, Air Heater, chemical equipments

Thermic Fluid Heaters, Air Heaters, Boilers, Electric Boilers

Thermic Fluid Heater, Industrial Boiler, Fired Steam Boiler, fired boiler

Thermic Fluid Heaters, Air Heaters, Boilers, boilers accessories

Thermic Fluid Heaters, hot air stenter, Rotary Screen Printing Machine

Thermic Fluid Heater, Boilers, Hot Water Generator, Air Heaters

Thermic Fluid Heater, Hot Water Boilers, Dal Mill Dryer, electrical boiler

Thermic Fluid Heaters, eurotech concrete plants, eurotech concrete mixers