Food Grade Epoxy Paint Dealers

Avail from us Food Grade Epoxy Paints that have low viscosity. The Food Grade Epoxy Paints result in 100% volume solids epoxy coating. Our specially formulated Food Grade Epoxy Paints comply with SSPC paint 42 specification. They are applicable over variety of substrates including Aluminum, Concrete, Glass, FRP, GRP etc.When used as part of approved scheme, this material has following certifications Food Contact  -  Carriage of Grains ( NOHA ) Food Contact   - FDA Compliant : Dry Foodstuffs Tested for non-contaminations of grain cargo  at the Newcastle Occupational Health, Great Britain Theoretical Spreading Rates 3.9 m²/litre - 200 micron 3.9 m²/litre - 200 micron 154 sq.ft./US gallon - 8 mils 154 sq.ft./US gallon - 8 mils Flash point : 35°C/95°F 35°C/95°F Introduction to Food Grade Epoxy A low viscosity,  100% volume solids epoxy coating Compliant with SSPC paint 42 specification Applicable over variety of substrates including Aluminum, Concrete, Glass, FRP, GRP etc. Flexibility in application – can be applied directly over tightly adherent rust, old coating, oily, condensed & splash zone surface. Can be used underwater for wrapping of piling, jacket legs & variety of substrates Properties of Food Grade Epoxy 100% Solid Epoxy Coating '0' Volatile Organic Compound Food-grade certified '0' Flame spread Applicable directly on difficult surfaces, viz. Stainless Steel, Aluminum, Galvanized Iron etc. Examples of Applications As a protective coating for structures in harsh environment Condensation structure / piping Online high heat application (≤ 150°C) Underwater piling, jacket legs, risers GRE/GRP piping FRP strengthening As a Metal Filling Compound (MFC) (≤5mm) Oily bilge wells / pump rooms / engine room Concrete & concrete repairs As a floor-coating – also for "Clean Room" applications "Happy to inform you that we stock and trade in this Food Grade Epoxy Paints, we have observed visually and found satisfactory paint which was applied on condensate surface lines at our premises”Food Grade Epoxy Paints – an innovative 100% solid multipurpose epoxy coating : Meets & exceeds the requirements enlisted in SSPC Paint 42 specification 100% solid epoxy – no solvents added – “0” VOC Specially formulated for multipurpose use in offshore environment No stringent requirements for surface preparation – can be applied on tightly adherent rust Equally good performance even when applied on oily or damp surfaces Applicable directly underwater without any modifications Can be used along with wrapping tapes underwater for extra protection to risers, piling, structure etc. Along with Zirconium (added externally), can be used as a Metal Filling Compound Food grade coating – DNV certified – applicable for internal lining of Potable water tank Class “0” rated fire retardant Applications Crude, product & potable water storage tank linings Ballast tank coating where surface preparation may be an issue Bilges, pump rooms etc. where there is a high possibility of oily substrate High temperature application (up to 150 deg. C) Engine shell coating Sweating lines – can be applied directly without shutdown Risers, jackets, piling – for underwater application GRE & FRP repairs & restoration Self-levelling floor coating – Sterile grade

• Packaging Size: 20-25 L
• Brand Name: Berger
• Country of Origin: India
• Finish: High Gloss

Epoxy flooring is useful in many industries like manufacturing industry, engineering industry and is widely used in shopping malls, big hotels etc. It is abrasion resistant and has a very good finishing look. These epoxy flooring are available in all major colours like gloss and mat finish.

• Type: Epoxy
• Grade: Food Grade
• Features: 100% Solid Epoxy Coating, '0' Volatile Organic Compound
• Flash point: 35°C/95°F 35°C/95°F
• Durability: Long Life
• Viscosity: Low

When used as part of approved scheme, this material has following certifications Food Contact - Carriage of Grains ( NOHA ) Food Contact - FDA Compliant : Dry Foodstuffs Tested for non-contaminations of grain cargo at the   Theoretical spreading rates : 3.9 m²/litre - 200 micron 3.9 m²/litre - 200 micron 154 sq.ft./US gallon - 8 mils 154 sq.ft./US gallon - 8 mils   Introduction to Food Grade Epoxy A low viscosity, 100% volume solids epoxy coating Compliant with SSPC paint 42 specification Applicable over variety of substrates including Aluminum, Concrete, Glass, FRP, GRP etc. Flexibility in application – can be applied directly over tightly adherent rust, old coating, oily, condensed & splash zone surface. Can be used underwater for wrapping of piling, jacket legs & variety of substrates   Properties of Food Grade Epoxy 100% Solid Epoxy Coating '0' Volatile Organic Compound Food-grade certified '0' Flame spread Applicable directly on difficult surfaces, viz. Stainless Steel, Aluminum, Galvanized Iron etc.   Examples of Applications As a protective coating for structures in harsh environment Condensation structure / piping Online high heat application (≤ 150°C) Underwater piling, jacket legs, risers GRE/GRP piping FRP strengthening As a Metal Filling Compound (MFC) (≤5mm) Oily bilge wells / pump rooms / engine room Concrete & concrete repairs As a floor-coating – also for "Clean Room" applications   "Happy to inform you that we stock and trade in this Food Grade Epoxy Paints, we have observed visually and found satisfactory paint which was applied on condensate surface lines at our premises”   Food Grade Epoxy Paints – an innovative 100% solid multipurpose epoxy coating Meets & exceeds the requirements enlisted in SSPC Paint 42 specification 100% solid epoxy – no solvents added – “0” VOC Specially formulated for multipurpose use in offshore environment No stringent requirements for surface preparation – can be applied on tightly adherent rust Equally good performance even when applied on oily or damp surfaces Applicable directly underwater without any modifications Can be used along with wrapping tapes underwater for extra protection to risers, piling, structure etc. Along with Zirconium (added externally), can be used as a Metal Filling Compound Food grade coating – DNV certified – applicable for internal lining of Potable water tank Class “0” rated fire retardant   APPLICATIONS Crude, product & potable water storage tank linings Ballast tank coating where surface preparation may be an issue Bilges, pump rooms etc. where there is a high possibility of oily substrate High temperature application (up to 150 deg. C) Engine shell coating Sweating lines – can be applied directly without shutdown Risers, jackets, piling – for underwater application GRE & FRP repairs & restoration Self-levelling floor coating – Sterile grade

A two component Epoxy Bitumen based paint with Aluminium Pigmented. For D.I.Pipes, Chemical Plants, Petrochemical Plants, Refineries, Pipelines, Fertilizers Plants, Pharmaceutical Units, Marine Installation Etc.

A Two component, light colored, solvent free pure epoxy coating Confirming to BS-6920 & IS:3589-2001 & AWWA-C-210 & Tested as per ASTM procedures. To be applied by spray brush &to give desired D.F.T. Recommended for potable water pipelines and containers, ship ballast tanks, void spaces, cofferdams and wet spaces. etc.

Concrete is today’s main building material. Modern infrastructure, road and bridge construction would be inconceivable without concrete as would skyscrapers and industrial buildings. Concrete is a versatile building material used especially in civil engineering in combination with steel. Concrete and reinforced concrete are building materials that have significantly changed construction. Despite concrete’s durability, serious concrete damage that endangers a building’s existence frequently occurs. The main cause of concrete damage is reinforcement steel corrosion due to environmental influences.

Chromapoxy HB CTE 355 is high build, high solid two component amine cured specially pigmented, water resistant coal tar epoxy coating with superb and unparallel performance in highly saline, chemical and corrosive environments. It is absolutely unaffected by alkalinity or sulphates in soil water. It is also very suitable for varied use in conjunction with cathodic protection.

• Type: Food Grade Epoxy Paint
• Application: Brush, Roller, Spray Gun
• Color: Dark Brown / Light Yellow
• State: Liquid
• Categories: Industrial
• Country of Origin: India
• Finish: Soft Sheen
• Packaging Size: 1-5 L, 10-15 L, 15-20 L, 20-25 L, 5-10 L
• Adhesion to Steel (psi): > 2000

Food Grade Epoxy Paint, Acid Resistant Epoxy Paints, Industrial Greases