Back Back
Lap Joint Flanges
Get Price Quote
We are instrumental in providing excellent quality Lap Joint Flange which is practically identical to a slip-on flange except it has a larger radius at the intersections of the bore and flange face. It is used with their associated stub end. High Nickel Alloys : Monel 400 , Monel K 500 , Incoloy 600 , Incoloy 625 , Incoloy 800H , Incoloy 825, Incoloy 718, Inconel X - 750, Alloy 20 (CB 20) , Hastelloy C 276 , Hastelloy C 22 , Hastelloy C4. Other Alloys : Titanium Gr 2 , Titanium Gr 5, Aluminium Bronze (AB 2) , Phosphorous Bronze (PB).
Reducing Flanges
Get Price Quote
Reducing Flanges Grade: Stainless Steel Reducing Flange: ASTM A182 Grade : F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L Duplex Steel Reducing Flange: ASTM ASME ASA 182 UNS F 44, F 45, F51, F 53, F 55, F 60, F 61 Alloy Steel Reducing Flange: ASTM SA 182 F1F5F9F11F22F91 Carbon Steel Reducing Flange: ASTMA 105 Gr. F42465256606570 Low Temperature Carbon Steel Reducing Flange: A350 LF2A350 LF3 Reducing Flanges Standard: ANSI: ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 DIN: DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673 B.S: BS4504, BS4504, BS1560, BS10
Best Deals from Pipe Flanges
Threaded Flanges
Get Price Quote
Threaded Flanges are confined to special applications. Their chief merit lies in the fact that they can be assembled without welding this explains their use in extremely high pressure services, particularly at or near atmospheric temperature, when alloy steel is essential for strength and where the necessary post weld heat treatment is impractical. Threaded Flanges are unsuited for conditions involving temperature or bending stresses of any magnitude, particularly under cyclic conditions, where leakage through the threads may occur in relatively few cycles of heating or stress; sea welding is sometimes employed to overcome this, but cannot be considered as entirely satisfaction. Key Features: Can be attached to the pipe without welding (sometimes an additional seal weld is used as well) Ideal for higher pressure and temperature applications for small pipe sizes Not recommended for larger loads, especially when subjected to higher torque Uses of threaded flanges: Threaded flanges can be fitted to pipes of various sizes without welding and this is one chief benefit for which these flanges are highly demanded. They can be used in extremely high pressure applications, particularly at or near atmospheric temperature, where the necessary post weld heat treatment is not possible. They are ideal for small diameter piping applications. They are economical and time saving devices. These threaded flanges are normally designed for non-cyclic applications. The flanges are suitable to be used in applications where welding is hazardous. They can be used in highly explosive areas.
Stainless Steel Plate Flanges
Get Price Quote
• Forged Flanges • Screwed Flanges • Threaded Flanges • Spectacle Flanges • Weld Neck Flanges • Ring Type Joint Flanges • WNRF Flanges • RTJ Flanges • Long Neck Weld Flanges • Socket Weld Flanges • Lapped joint Flanges • Reducing Flanges • Blind Flanges • SWRF Flanges • BLRF Flanges • Plate Flanges • Slip On Flanges • Raised face Flanges • SORF Flanges • Orifice Flanges
Ring Joint Flanges
Get Price Quote
Ring Type Joint Flange is a method of ensuring leak proof flange connection at high pressures. A metal ring is compressed into a hexagonal groove on the face of the flange to make the seal. This jointing method can be employed on Weld Neck, Slip-on and Blind Flange.
Alloy Steel Threaded Flange
150 - 350 Per Piece
100 Piece (MOQ)
Like Slip-on except bore of this flange is threaded to match the pipe size. Used for low pressure systems and where welding could be hazardous. Grades: Alloy Steel ASTM A182 F5 Flanges Alloy Steel ASTM A182 F9 Flanges Alloy Steel ASTM A182 F11 Flanges Alloy Steel ASTM A182 F22 Flanges Alloy Steel ASTM A182 F91 Flanges
Threaded Flanges
Get Price Quote
1 Ton (MOQ)
Highly acclaimed Manufacturer & Supplier of Threaded Flanges, Carbon Steel Threaded Flanges, Stainless Steel Threaded Flanges, Alloy Steel Threaded Flanges, Inconel Threaded Flanges, Monel Threaded Flanges, Hastelloy Threaded Flanges in IndiaWe are largest manufacturers of Threaded Flanges & have huge stock of 304 Threaded Flanges, 316 Threaded Flanges, astm a105 Threaded Flanges, astm a182 Threaded Flanges as per asme / ansi B16.5 Threaded flanges, ansi B16.47 Threaded flanges, Din Threaded flanges, jis Threaded flanges & uni Threaded flanges Standards.We offer high quality Threaded Flanges in all size, classes & dimensions like Class 150 Threaded Flanges, Class 300 Threaded Flanges, Class 600 Threaded Flanges, Class 900 Threaded Flanges, Class 1500 Threaded Flanges & Class 2500 Threaded FlangesWe are a largest Manufacturer, Supplier and Exporter of Thread Flanges, ASME 16.5 Threaded Flanges. Threaded Flanges (Screwed flanges)are similar to slip-on flanges in outline, but the bore is threaded, thus enabling assembly without welding. This obviously limits its application to relatively low pressure piping systems. Threaded Flanges may be welded around the joint after assembly, but this is not considered a satisfactory method of increasing the flanges’ pressure applications. Threaded flange use in low press condition usually. These flanges are normally designed for low pressure, non-cyclic applications. They are also used in applications where welding is hazardous. Threaded flanges are widely demanded as pipe flanges i.e called as threaded pipe flanges used in different industrial applications. Threaded Flanges are available in following specifications:
Stainless Steel Butt Weld Flanges
220 Per Piece
1000 Piece (MOQ)
Lap Joint Flanges
Get Price Quote
Made from premium steel and other metal alloys, our Lap Joint Flanges are highly demanded in the national and international market. The Lap Joint Flanges are used to help with bolt alignment for erection of piping with large diameter of unusually stiff structure. We take the utmost care to ensure integrity in the designing and manufacture of our Lap Joint Flanges that are made as per the clients specific requirements. Features : High metallurgical strength Easy installation Reliable performance Long service life Resistance to rust Application Areas : Petroleum industry Processing industry Steel plants Refineries Ship building Chemical industry Range : ½ (15 NB) to 48 (1200NB) in 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS ASA 150, ASA 300, PN 6,10,16,25, 40,64,100,160 ETC. Available with NACE MR 01-75 Availability : Stainless Steel : Grade : 304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 L, 317, 317L, 321, 347, 347 H, 409, 410, 410S, 420, 430L Duplex Steel : Grade : 2205 (UNS No. S31803), 2507 (UNS No. S32750) Nickel Alloy : Grade : Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II) Copper Alloy : Grade : UNS No. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500, UNS No. C 70600 (Cu -Ni- 90/10), C 71500 (Cu -Ni- 70/30) Standard : ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673 B.S : BS4504 , BS4504, BS1560, BS10 Other : Plate, Plate Blank What we offer : Hot Dipped Galvanizing Heat Treatment CNC Machining Threading
Slip On Flange
Get Price Quote
10000 Piece (MOQ)
A Flange is a method of connecting pipes, valves, pumps and other equipments to form a piping system. It also provides easy access for cleaning, inspection or modification. Flanges are useally Welded or Screwed. Flanges joints are made by bolting together two flanges with a Gasket between them to provide a seal. DIAMENTION . STD :- ASME B16.5/B16.47. GRADE :- ASTM/ASME A105, A350 LF2 & A182 Gr.F5,F11,F22,F51,F52,F91,F92,F 304, F304H,F304L,309H, 309S, F310,F316, F316L,F317, F317L,F321 & F347H CLASS :- 150#, 300#, 600#, 900#, 1500# & 2500# RANGES :- 1/2”NB TO 24”NB
Stainless Steel Threaded Flange
Get Price Quote
To cater to different requirements, our Stainless Steel Threaded Flange is offered in ample of specifications. Our manufacturers make use of the highest quality Stainless steel for their production. Rely in us! Details : Stainless Steel - ASTM A 182, A 240 Carbon Steel - ASTM A 105, ASTM A 181 Alloy Steel - ASTM A 182, GR F1, F11, F22, F5, F9, F91 Nickel Alloys - Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276 Copper Alloys - Copper, Brass & Gunmetal Size - 1/8" NB TO 48"NB Class - 150, 300, 400, 600, 900, 1500 and 2500 Features : Durable Reliable Long service life Low maintenance Corrosion free For SS Threaded Flange Feel Free to Email Us
Ring Joint Flanges
Get Price Quote
10 Piece (MOQ)
Lap Joint Flanges
400 Per Piece
100 Piece (MOQ)
Ring Type Joint Flanges
Get Price Quote
Hot Dip Puddle Flange
180 Per Kilogram
Hot Dip Puddle Flange We have gained vast industry experience in this realm for offering a wide array of Hot Dip Puddle Flanges for our valued clients.Developed by trained professionals the offered flanges are thoughtfully processed after anticipating the thickness, hardness and quality standard requirements of our randhir Metal And Alloys Pvt Ltd
Stainless Steel Plate Flange
Get Price Quote
1000 Piece (MOQ)
Stainless Steel Slip On Flange
Get Price Quote
100 Kilogram (MOQ)
Ring Type Joint Flange
Get Price Quote
10 Piece (MOQ)
Ring Type Joint Flange Standard Specifications : Standards/Dimensions : ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, BS, GOST, MSS SP-44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605 Flange Face Types/Connection Type : Flat Face Flange (FF), Raised Face Flange (RF), Ring Joint Flange (RTJ), Lap Joint Flange, Male and Female Flange (M&F), Large and Small Tongue-and-Groove Flange (T&G) Material Test Certificates (MTC) : As per EN 10204 3.2 and EN 10204 3.1, Test Certificates certifying NACE MR0175, NACE MR0103 Test Certificates : 100% Radiography Test Report, EN 10204/3.1B, Raw Materials Certificate, Third Party Inspection Report, etc Tests : Hydrostatic testing machine, Direct-reading Spectrograph, UI trasonic flaw detector, X-ray detector, Magnetic particle detector Equipment/Machines : Press machine, Pushing Machine, Bending machine, Sand-blasting machine, electric bevelling machine, etc. Details : Ring Type Joint Flange Material Grades Ring Type Joint Flange Standards ASME B16.5 Ring Type Joint Flange Class 150 Dimensions ASME B16.5 Ring Type Joint Flange Class 300 Dimensions ASME B16.5 Ring Type Joint Flange Class 400 Dimensions ASME B16.5 Ring Type Joint Flange Class 600 Dimensions ASME B16.5 Ring Type Joint Flange Class 900 Dimensions ASME B16.5 Ring Type Joint Flange Class 1500 Dimensions ASME B16.5 Ring Type Joint Flange Class 2500 Dimensions How To Order Ring Type Joint Flanges? Ring Type Joint Flange Industries and Applications Ring Type Joint Flanges Supply and Export Network Ring Type Joint Flange Price and Other Flange Types Weld Neck Flange Long Weld Neck Flange Slip On Flange Spectacle Blind Flanges Socket Weld Flanges Blind Flanges / Dummy Flange Screwed / Threaded Flanges Orifice Flanges Lap Joint Flanges ANSI B16.5 Square Flanges Ring Type Joint Flanges Tongue and Groove Flange Expander Flanges Reducing Flanges Male & Female Flanges Weldolet Flange Nipolet Flange Backing Ring Flanges Ring Spacer Flanges Paddle Blind Flanges Plate Flange High Hub Blind Flange Custom Flanges Swivel Ring Flange
Orifice Flanges
Get Price Quote
We are a leading Orifice Flanges Exporter and Supplier from India, providing premium Orifice Flanges to various industries. Designed in different sizes, dimensions and shapes, our Orifice Flanges are made as per international standards and are highly useful in pipeline applications. Their main use is in the measurement of gas and liquid flow rates in the pipelines.Speciality : High endurance Long-lasting construction Corrosion resistant body Dimensionally accurate design Protective finishing Application Areas : Natural gas plants Petroleum industry Beverage industry Water treatment plants Distilleries Chemical industry Range : ½ (15 NB) to 48 (1200NB) in 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS ASA 150, ASA 300, PN 6,10,16,25, 40,64,100,160 ETC. Available with NACE MR 01-75Availability : Stainless Steel Grade - 304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 L, 317, 317L, 321, 347, 347 H, 409, 410, 410S, 420, 430L Duplex Steel Grade - 2205 (UNS No. S31803), 2507 (UNS No. S32750) Nickel Alloy Grade - Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II) Copper Alloy Grade - UNS No. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500, UNS No. C 70600 (Cu -Ni- 90/10), C 71500 (Cu -Ni- 70/30) Standard : ANSI - ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 DIN - DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673 B.S - BS4504 , BS4504, BS1560, BS10 What we offer : Hot Dipped Galvanizing Heat Treatment CNC Machining Threading
Stainless Steel Slip On Flanges
100 - 1,000 Per Piece
10 Piece (MOQ)
puddle flange
Get Price Quote
Threaded Flange
Get Price Quote
2 Metric Ton (MOQ)
Material Stainless Steel Alloy Steel Carbon Steel Aluminum Brass Special Grades 2205 Duplex CUNI 90/10, 70/30 Copper Nickel 904L Stainless Steel Monel 400 Inconel Alloy 20 201/201 Stainless Steel 304/304L Stainless Steel 310S Stainless Steel 316/316L Stainless Steel 317L Stainless Steel 321/321H Stainless Steel 347/347H Stainless Steel
Mild Steel Spectacle Blind Flange
Get Price Quote
1 Metric Ton (MOQ)
Round Slip On Flanges
65 Per Kilogram
CARBON STEEL ASTM A694 HIGH YIELD CS PIPE FLANGES
Get Price Quote
Carbon steel astm a694 high yield cs pipe flanges, bs10 table d, table e, din standard flanges, high yield cs f52 flanges, a694 high yield cs flange, stockist of high yield carbon steel slip on flanges, ansi b16.5 high yield f46 cs orifice flanges, global supplier of a694 high yield cs weld neck flange, carbon steel a694 high yield blind flanges dealer in india. High yield cs astm a694 threaded flanges supplier, ansi b16.5, ansi b16.47, b16.48, bs4504, bs 10, en-1092 high yield cs forged flanges, manufacturer of a694 high yield f60 cs plate flange, high yield f65 cs a694 socket weld flanges, carbon steel astm a694 f70 high yield lapped joint flanges in mumbai, india.
Slip On Flanges
300 - 75,000 Per Piece
1 Pc (MOQ)
We are one of the supreme manufacturers and exporters of Slip On Flanges in the market. Fabricated using optimum quality raw materials procured from trusted vendors our Slip On Flanges are extremely durable and easy to fix. Used in a large variety of industries for low pressure applications the Slip On Flanges are easy to weld and join. Attributes : Strong build Easy to use User friendly Corrosion resistant Abrasion resistant Resistant to chemicals Best for : Oil and Gas Inds Petroleum Inds Chemical Inds Pharmaceutical Inds Our Main Sales Location Australia, Belgium, Canada, France, Germany, Italy, Netherland, Saudi Arabia, Singapore, Spain, Turkey, UAE, United Kingdom, USA.
Lap Joint Flanges
Get Price Quote
Backed by a group of professionals, we are involved in providing an all-inclusive range of Lap Joint Flanges to our valued patrons. This is again similar to a slip-on flange, but it has a radius at the intersection of the bore and the flange face to accommodate a lap stub end. Lap joint flanges are always used with either a stub end or taft which is butt welded to the pipe with the flange loose behind it. Lap Joint Flanges have all the same common dimensions as any other flange, however it does not have a raised face, they used in conjunction with a “Lap Joint Stub End”. These flanges are also used in applications where there is a need to facilitate bolt alignment. Super Duplex Lap Joint Flanges Manufacturers, Copper Nickel Lap Joint Flanges, Nickel Alloy Lap Joint Flanges Exporter in India. These flanges are offered at custom-made sizes and shapes to our valued patrons.We Export Lap Joint Flanges in Qatar, Kingdom Of Bahrain, Saudi Arabia, Indonesia, United States, Singapore, Malaysia, Turkey, UAE, Russia, Ukraine, South Africa, Australia, etc. Specialist of Manufacturing Lap Joint Flanges, Inconel 600 Lap Joint Flanges, BS-4504 Lap Joint Flanges, Hastelloy Lap Joint Flanges. ASME B16.5 Lap Joint Flanges Specification : Standard: ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings Size: 1/2″ (15 NB) to 48″ (1200NB) Class: 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc. Flange Face Type: Raised Face (RF), Ring Type Joint (RTJ),Large Tongue & Groove, Small Tongue & Groove BS: BS4504 , BS4504, BS1560, BS10 DIN: DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673 ANSI B16.47 Lap Joint Flanges Material & Grades: Stainless Steel Lap Joint Flanges: ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L Duplex & Super Duplex Steel Lap Joint Flange: ASTM / ASME A/SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61, 2205 (UNS No. S31803), 2507 (UNS No. S32750) Carbon Steel Lap Joint Flange: ASTM / ASME A/SA 105 ASTM / ASME A 350 , ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F70, ASTM A350, LF2, LF3 Alloy Steel Lap Joint Flange: ASTM / ASME A/SA 182 & A 387 F1, F5, F9, F11, F12, F22, F91 Copper Alloy Steel Lap Joint Flange: UNS No. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500, UNS No. C 70600 (Cu -Ni- 90/10), C 71500 (Cu -Ni- 70/30) Nickel Alloy Lap Joint Flange: ASTM SB564, SB160, SB472, SB162 Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020). Leading Manufacturers of Lap Joint Flanges & Other Ready Inventory of Lap Joint Flanges We Manufacture a wide range of Lap Joint Flanges (ANSI B16.5, ANSI B16.47), SS Lap Joint Flanges Exporter in India, Stainless Steel Lap Joint Flanges, ANSI B16.5 Lap Joint Flanges, Duplex Steel Lap Joint Flanges, Class 150 LBS Lap Joint Flanges, MSS SP-44 Lap Joint Flanges, DIN-2527 Lap Joint Flanges, BS-4504 Lap Joint Flanges, Super Duplex Steel Lap Joint Flanges, Lap Joint Flanges, Lap Joint Flanges, ANSI B16.47 Lap Joint Flanges, Carbon Steel Lap Joint Flanges Stockholder, Alloy Steel Lap Joint Flanges Dealers, Lap Joint Flanges Distributors, Inconel 600 Lap Joint Flanges in Saudi Arabia, Nickel Alloy Lap Joint Flanges Suppliers, Lap Joint Flanges Exporter in Qatar, Lap Joint Flanges Stockist, Steel Lap Joint Flanges in United States, Lap Joint Flanges in Malaysia, Hastelloy Lap Joint Flanges, Manufacturer of Comprehensive Range Monel 400 / K500 Lap Joint Flanges, Titanium Lap Joint Flanges in UAE, Copper Nickel Lap Joint Flanges are Available in Different Dimensions and Specifications. We are Leading Manufacturer of Alloy 20 Lap Joint Flanges in INDIA.
Orifice Flanges
Get Price Quote
We provide wide range of orifice flanges that is designed as per the international standards of ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP and NACE. We also provide these flanges with mill test certificate as per EN 10204 / 3.1B.
Alloy Steel Lap Joint Flanges
Get Price Quote
Alloy Steel Lap Joint Flanges of lap joint flanges. Lap joint flanges are used in those piping, which are fitted with the lapped pipe or with the stub end lap joint flanges. The lap joint flanges are highly suitable for those systems, which require dismantling for inspection and cleaning. Swivel flanges and align bolt holes have the ability in easing the erection of large diameter.
Mild Steel Round Flange
150 Per Piece
Filter by Localities
