Pipe Flanges Dealers in Kumbharwada, Mumbai

• Type: HUB FLANGE
• Brand Name: HUB
• Material: FLANGE
• CNC Machining or Not: CNC
• Packaging Type: WILL B DISCUS TO BYER

We are offering hub flange, ss hub flange quality-304,304l,316,316l,etc. Flange dimensions-asa150class,asa300,asa600,asa900,asa1500,asa2500class,etc. Sizes-12 to 24nb we manufacture.

ASME Slip on Flanges, ASTM Slip on Flanges, Stainless Steel Slip on Flanges, Duplex Steel Slip on Flanges, Monel and Inconel Slip on Flanges, Alloy Steel Slip on Flanges Manufacturer and Exporter in India. ASTM/ASME – A 182, SA 182, ASTM B247, B361, Aluminum Slip on Flanges, Carbon Steel Slip on Flanges, Nickel Alloy Slip on Flanges, supplier.Shasan Piping Solution is particular in making high caliber of Slip-on ribs. These sorts of ribs usually slip over the channel. Slip on channel ribs are all things considered fabricated by method for inside distance across of the funnel rib which is higher than the outside width of the channel in some measure. All things considered, this permits the Slip on spine to in truth slip over the channel. Slip-on channel ribs are being associated, for the most part towards both inside and outside, to give quality furthermore to stop the spillage. Now and again they additionally have a ring/manager or a point of convergence, and can be produced with a drag for to run entirely well with either pipe or tube.Range :½” (15 NB) to 60” (1500NB) in 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS ASA 150, ASA 300, PN 6,10,16,25, 40,64,100,160 ETC. available with NACE MR 01-75.Features : Dimensional accuracy High efficiency Corrosion resistance Durable Excellent finish Details : Stainless Steel Standard  - ASTM / ASME A/SA 182 Grade - F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L Titanium Standard  - ASTM B381. Grade - Grade 1, Grade 2, Grade 4, Grade 5, Grade 6, Grade 7, Grade 9, Grade 19, Grade 23 Duplex Steel Standard  - ASTM / ASME A/SA 182 Grade - F 44, F 45, F51, F 53, F 55, F 60, F 61 Copper Alloy Standard  - ASTM / ASME SB 61 / 62 / 151 / 152. Grade - UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30) C 71640 Nickel Alloy Standard  - ASTM / ASME SB 564 / 160 / 472 Carbon Steel Standard - ASTM A 105/A694/ A350 LF3/A350 LF2. Grade - F42/46/52/56/60/65/70 Low Temperature Carbon Steel ASTM A 350 LF2 / A350 LF3 Alloy Steel Standard  - ASTM A182 Grade - F1/F5/F9/F11/F22/F91 Nickel Alloy Standard : Nickel 200 – UNS N02200 Nickel 201 – UNS N02201 Monel 400 – UNS N04400 Monel K500 – UNS N05500 Inconel K600 – UNS N06600 Inconel 601 – UNS N06601 Inconel 625 – UNS N06625 Inconel 800 – UNS N08800 Inconel 800H – UNS N08810 Inconel 825 – UNS N08825 Hastelloy C276 – UNS N10276 Alloy 20 – UNS N08020

Our capacious warehouse is installed with all required amenities essential for safe storage of the products. Furthermore, our warehousing system is efficiently managed by our team of experts. Backed by a hardworking team, we are capable of offering the Plate Flanges as per the exact requirements of the buyers.Features : Seamless Reliable Optimum quality Perfect finish Precise design

• Brand Name: SKYLAND
• Size: 0-1 inch, 1-5 inch, 5-10 inch, 10-20 inch, 20-30 inch, >30 inch
• Material Standard: ASTM A105, ASTM A182, ASTM A351, ANSI B16.5
• Price: Rs 1,500 / Piece

Since inception, we are involved in selling of premium Orifice SS Flanges, as we are its top supplier in the marketplace. Apart from online payment processing methods, we also facilitate payment through offline mediums.

• Temperature: 200-400 ℃
• Unit Length: 18-24m
• No. of Holes: 12-16 Holes
• Shape: Round
• Certification: CE Certified
• Technics: Casting

Based in Maharashtra, India, we are one of the leading manufacturers, wholesale suppliers and exporters of Lap Joint Flanges. We offer Lap Joint Flanges which are premium quality products and are renowned in the market for their durability and high performance. Our Lap Joint Flanges are cost effective and qualitatively superior. These are primarily used when quick assembly and disassembly of pipe line section is required under limited working pressure. We offer the product at market leading prices.   Specifications : ANSI B 16.5 from 1/2" to 24" and classes150 to 2500 (complete range) Applications : These are primarily used when quick assembly and disassembly of pipe line section is required under limited working pressure.

Flanges Weldneck, Flanges Slipon, Flanges Blind, Flanges Socket Weld, Flanges Lap Joint, Flanges Spectacles, Flanges Ring Joint, Flanges Orifcae, Flanges Long Weldneck, Flanges Deck Flange Our range of forged flanges includes screwed flanges, blind flanges, slip on flanges etc. They are made using good quality steel alloys like Hastelloy C22, Incolloy 800 and ASTM A182. Each product is made according to a different standard and grade. They are available in different sizes and shapes. They are used for a large number of purposes. They are long lasting and robust in construction. They can be modified according to customer requirements. Slip On Flanges We offer wide array of slip on flings which slide over the end of piping and then welded in place. Slips on Flanges are perfect for lower pressure applications and can be easily fitted & welded into different pipes. They are often used to ensure an even flow of water to showers. The welding helps to reduce the fabrication costs of these pipes. . These are available in various dimensions like ASME-ANSI B16.5, ASME-ANSI B16.47, AWWA C207, BS 1560, IS 13159, BS 3293, and BS 4504. Size Range: 15NB TO 1200NB.Features:•    High quality, best service •    Market leading prices•    Available in various specifications

Based in Mumbai, Maharashtra, we are the most trusted manufacturer, exporter and supplier of superior quality Lap Joint Flanges that can be availed in multiple material grades such as stainless steel, carbon as well as alloy lap joint flanges. The lap joint flanges supplied by us are pretty much similar to the other flanges but they do not come with a raised face. You can use these flanges in conjunction with the Lap joint stub End. The ability of this flange to hold the pressure is comparatively low and the fatigue is only one tenth when compared to the welding neck flanges. There are a number of benefits of using the lap joint flanges. You can easily swivel around the flanges and this makes the lining up of opposing flange bolt holes easier. There is no proper contact with the pipe this makes them corrosion resistant. Thus, the flanges will not corrode easily and might be salvaged. The size of the flanges can carry from 1/2 "(5NB ) to 48 "(1200NB). Our products can be globally availed by you in safe packaging and at affordable prices.   Specification : Size : 1/2 "(5NB ) to 48 "(1200NB) Standards : ANS B 16.5 , ANSI B16.47 Series A & B , MSS SP44, ASA , API - 605 , AWWA, Custom drawings Pressure Rating : class 150 , Class 300< class 400, class 600, class 900 , class 1500 , class 2500 , PN6, PN10, PN!6 , PN25,PN40, PN64 etc. Carbon Steel Lap Joint Flanges : ASTM  A 105/A105N ,A350 LF1, LF2CL1/CL2,LF3CL1/CL2,LF3 CL1/CL2,A694 F42,F46,F48,F50,F52,F56,F60 ,F65 , F70,F516.60,65,70 (Spectacle Blind flange , Spade flange ) , Steel RST37.2,C22.8 Stainless steel lap joint flanges: ASTM A182 F202,F304?304H,F316?316L,F316TI ,F310,F321,F904L Alloy Steel lap joint flanges : ASTM A 182F1, F5,F9,F11,F22,F91 Special Alloy lap Jooint Flanges : Duplex , Super Duplex , Nickel Alloys Flange face type : Flate face (FF) , Raised face (RF) Ring Type joint (RTJ) coating / surface treatment : Anti- rust paint , Oil Black paini , Yellow transparent , Zinc plated. Cold and Hot dip Galvanized Value added services : CNC Machining Customized flanges

We offer an easy to install range of Orifice Flanges, which possesses high demands in the market. Precisely designed, these flanges are used with flow nozzle.

• Material: Mild Steel
• Shape: Round
• Color: Metallic
• Packaging Type: Carton
• Technics: Hot Dip Galvanized
• Usage: Industrial Use

• Size: Standard
• Thickness: 10-20mm
• Finishing: Polished
• Type: Socket Weld
• Material: Stainless Steel
• Shape: Round
• Color: Silver

• Size: 1/2" (15 NB) to 48" (1200NB)
• Standards: ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
• Class: 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.
• Flange Face Type: Flat Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
• BS: BS4504 , BS4504, BS1560, BS10
• DIN: DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629

• Finishing: Polished
• Feature: Durable, Fine Quality
• Standards: ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605
• Special Alloy Lap Joint Flanges: Duplex, Super Duplex, Nickel Alloys
• Stainless Steel Lap Joint Flanges: ASTM A182 F202, F304/304L/304H, F316/316L, F316H, F316TI, F310, F321, F904L
• Alloy Steel Lap Joint Flanges: ASTM A182 F1, F5, F9, F11, F22, F91

Item Code : LapJointFlanges. We Prashaant Steel , are one of the leading manufacturer , Exporter and supplier of Lap Joint Flanges.Pressure Ratings : Class 150, Class 300, Class 400, Class 600, Class 900, Class1500, Class 2500 | PN6, PN10, PN16, PN25, PN40, PN64 etc.Carbon Steel Lap Joint Flanges : ASTM A105/A105N, A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2, A694 F42, F46, F48, F50, F52, F56, F60, F65, F70, A516.60, 65, 70 (Spectacle Blind Flange, Spacer Ring/Spade Flange), Steel RST37.2, C22.8Specifications : ANSI B16.5 Lap Joint Flange 150lb ASME SB16.5 Lap Joint Flange 150lb ANSI B16.5 Lap Joint Flange 300lb ASME SB16.5 Lap Joint Flange 300lb ANSI B16.5 Lap Joint Flange 400lb ASME SB16.5 Lap Joint Flange 400lb ANSI B16.5 Lap Joint Flange 600lb ASME SB16.5 Lap Joint Flange 600lb ANSI B16.5 Lap Joint Flange 900lb ASME SB16.5 Lap Joint Flange 900lb ANSI B16.5 Lap Joint Flange 1500lb ASME SB16.5 Lap Joint Flange 1500lb ANSI B16.5 Lap Joint Flange 2500lb ASME SB16.5 Lap Joint Flange 2500lb

• Type: Flange
• Flange Type: Butt Weld
• Color: Golden
• Shape: Round
• Usage/Application: Industrial
• Finish: Polished

Strong industrial base along with a wide area network, we deliver the range in the stipulated time span. It is due to our guarantee of providing damage-free products to the clients; we are highly in demand amongst the buyers. Our packaging experts keep a stringent check on the entire packing procedure ensuring the same.   Features : Application: Construction Dimensionally accurate Corrosion resistance   Ranges : Weld Neck, Slip on / Threaded, Lap Joint, Blind, Socket Weld, Orifice, Long Neck, Spectacle blind.Note : Flanges are also manufactured as per customer's drawing

We are offering eel pipe fitting forge flange. 18" to 72" nb sch 10 to 160

Separating one part of a line from another requires a spectacle blind, able to switch from closed to open and back again. Bleed rings provide a means to release pressure from the pipe through a controlled opening.Materials used:Stainless Steel: ASTM A182 F304/304L, F316/316L, F316H,F316Ti,F321,F44(UNS S31254)Key Features: Can be attached to the pipe without welding (sometimes an additional seal weld is used as well) Ideal for higher pressure and temperature applications for small pipe sizesNot recommended for larger loads, especially when subjected to higher torque Uses of threaded flanges: Threaded flanges can be fitted to pipes of various sizes without welding and this is one chief benefit for which these flanges are highly demanded. They can be used in extremely high pressure applications, particularly at or near atmospheric temperature, where the necessary post weld heat treatment is not possible. They are ideal for small diameter piping applications. They are economical and time saving devices. These threaded flanges are normally designed for non-cyclic applications. The flanges are suitable to be used in applications where welding is hazardous. They can be used in highly explosive areas. These types of flanges are made from plate, and come in 3 different types. The first and most widely used type are spec blinds – short for spectacle: these are flanges with two equal outside diameter (OD) parts welded together by way of a ‘bridge’. One of the parts also contains an inside diameter (ID), while the other is a blank, or blind. A whole is put at the halfway mark of the bridge. These are also called spectacles, figure 8’s, and figure 8 blanks, because of their resemblance to reading glasses (spectacles) and figure 8’s. These are referred to as ‘Line Blanks’ in the ASME/ANSI standards. The second and third types are quite similar: both have longer bridges, referred to as ‘paddles’, which resemble longer handles. One type has only an OD, and so is a blind plate – similar in appearance to a large pizza oven peel. These are referred to as paddle blinds. The other type is exactly the same but comes with an ID as well, enabling flow-through when installed in a piping system. These pieces have holes in the paddle which enables field personnel to determine by sight which piece is installed in a system. These are referred to as paddle spacers, and are often supplied in sets together with the paddle blinds.All 3 types of these flanges are used in piping systems or pressure vessels where the flow needs to be interrupted from time to time. They are installed between two pipe flanges (as specified above), and by way of a screw inserted into the hole in the bridge or paddle, they are able to rotate or ‘swing’ into and out of position to interrupt or allow the flow, as the user sees fit. 

Our clients can avail from us a wide range of reducing Flanges tat is designed in compliance with international quality standards. These reducing flanges are available in all types and pressures and are widely used for pipe-to-pipe connections. The reducing flange includes a flange with one specified diameter having a bore of a different and smaller diameter. Except for the bore and hub dimensions, the reducing flange will have dimensions of the larger pipe size. To increase the size of the flange, these are used at the outlet side of the expansion joint. It is the most economical method to make a transition in size.Features Durable Corrosion resistance High strength Dimensional accuracy Fine finish Material Used : Carbon steel Stainless steel Alloy steel Brass Cast iron Bronze Aluminum PVC Types of Reducing Flanges : Welding Neck Slip-On Threaded Uses of Reducing Flanges : Reducing flanges are a little easier to bolt up than non-reducing flanges. They provide the most perfect solution when you need to connect different size flanges. These flanges are available in all types and pressures. Reducing flanges are fixed by welding, gluing or clamping flanges of equal dimensions provided with different connecting pieces. They offer the simplest and least expensive method of mating two different sized flanges. Specifications : Alloy Steel : ASTM A 182, GR F1, F11, F22, F5, F9, F91 Carbon Steel : ASTM A 105, ASTM A 181 Copper Alloys : Copper, Brass & Gunmetal Nickel Alloys : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276 Size : 1/8" NB TO 48"NB. Class : 150#, 300#, 400 #, 600#, 900#, 1500# & 2500 # Standards : ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673 B.S : BS4504 , BS4504, BS1560, BS10

• Orifice Flanges: ½” (15 NB) to 48″ (1200NB)
• ASTM A 182, A 240, F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L: ASTM / ASME A/SA 182 & A 387 F1, F5, F9, F11, F12, F22, F91
• ASTM / ASME A/SA 105 ASTM / ASME A 350 , ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F70: ASTM / ASME A/SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61

We are a government approved largest Manufacturer, Supplier and Exporter of Orifice Flanges, Orifice Flanges are used with orifice meters for the purpose of measuring the flow rate of either liquids or gases in the respective pipeline. They are, for all intensive purposes, the same as weld neck and slip-on flanges with extra machining. Orifice flanges may be provided in one of three types of flanges: Welding Neck, Slip-On and Threaded orifice flanges Can be Provided in all materails Carbon & Stainless Steel.MATERIALS: Domestic A105 (C.S.) AND A182 (S.S.) Other materials and schedules available   Standard Specifications ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 ,JIS,DIN,BS4504,SABS1123,EN1092-1, UNI,AS2129,GOST-12820DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673B.S : BS4504 , BS4504, BS1560, BS10 Specialize As per drawing Pressure Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS ASA 150, ASA 300, PN 6,10,16,25, 40,64,100,160 ETC. available with NACE MR 01-75 Flanges Forms & Types Orifice Flanges, Weld Neck Flanges – WNRF, Socket Weld Flanges – SWRF, Slip On Raise Face – SORF, Blind Raise Face – BLRF, Spectacle Blind, Ring Joint, Large Dia Flanges, Girth Flange, Lap Joint Flanges, Screwed (Threaded) Flanges, Long Weld Neck Flanges, Reducing.

Redearth steels manufacturer & exporter of orifice flanges available in various forms and size, standards like asme b16.36 flanges.we also offer custom-made orifice flanges that have been widely appreciated by our clients. Orifice flange is intended for use instead of standard pipe flanges when an orifice plate or flow nozzle must be installed. Pairs of pressure tapings are machined into the orifice flange, making separate orifice carriers or tapings in the pipe wall unnecessary. Orifice flanges cover all standard sizes and ranges, and all common flange materials.

• Size: 1/2 Inch (15 NB) to 48 Inches (1200NB)
• Material: Stainless Steel, Carbon Steel, Alloy Steel, Copper Alloy Steel, Nickel Alloy
• Flange Face Type: Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
• Packaging: sleeved into plastic bag individually, ten pieces wrapped with water-proof material, bundled with nylon rope
• Applications: Boilers Industry, Power Plants Industry, Nuclear Plants Industry, Oil & Gas Industry, Refineries Industry, Ship Building Industry, Heat Exchanger Industry, Condensers Industry, Paper & Pulp Industry

Threaded Flanges are confined to special applications. Their chief merit lies in the fact that they can be assembled without welding this explains their use in extremely high pressure services, particularly at or near atmospheric temperature, where alloy steel is essential for strength and where the necessary post weld heat treatment is impractical. Threaded flanges are unsuited for conditions involving temperature or bending stresses of any magnitude, particularly under cyclic conditions, where leakage through the threads may occur in relatively few cycles of heating or stress; sea welding is sometimes employed to overcome this, but cannot be considered as entirely satisfactory.

We provide Threaded Flange that is made using premium grade raw material. Our Threaded Flange is in huge demand in the national and international market. Specifications : ANSI B 16.5 from 1/2" to 24" and classes150 to 2500 (complete range) Applications : It is ideal to be used under high temperature and pressure assuring no welding joint is developed at assembly.

We manufacture a qualitative range of lap joint flanges that are made in compliance with set industrial standards. These flanges are used on piping fitted with lapped pipe or with lap joint stub ends etc.

• SIZE :: From 1/2" to 48"
• CLASS :: 150#, 300#, 400#, 600#, 900#, 1500#, 2500#.
• Feature: Easier to align,Slip on flanges have low hub

RTJ ribs have grooves cut into their confronts which acknowledge steel Ring Gaskets. RTJ ribs seal when fixed jolts pack the gasket between the ribs into the furrows, misshaping (or "Authoring") the gasket to reach inside the sections, making a metal to metal seal. A RTJ flange might have a raised face with a ring groove machined into it. This raised face does not serve as any part of the fixing implies. For RTJ ribs that seal with BX ring gaskets, the raised countenances of the joined and fixed ribs might get in touch with one another. For this situation the as of now begat gasket won't bear extra load past the jolt strain, vibration and development can't advance squash the gasket and decrease the uniting pressure.

Spectacle blind flange, We generally use stainless steel to produce these Spectacle Blind flanges. We also fabricate them in pure nickel and many other metals moulded steel, brass and aluminum. our range of Spectacle Blind flanges can also manufactured as per the customer's requirement.Steel Emporium Stockist of Spectacle Blind, Flanges Spectacle Blind, Spectacle Blind Flanges, Spectacle Blind Flanges Supplier, Spectacle Blind Flanges Exporter, Spectacle Blind Flanges Manufacturer, Spectacle Blind Flanges Dealer, Spectacle Blind Flanges Importer, Supplier of Spectacle Blind Flanges, Exporter of Spectacle Blind Flanges, Dealer of Spectacle Blind Flanges, Manufacturer of Spectacle Blind Flanges, Importer of Spectacle Blind Flanges, Spectacle Blind Flanges Suppliers, Spectacle Blind Flanges Exporters, Spectacle Blind Flanges Manufacturers, Spectacle Blind Flanges Dealers, Spectacle Blind Flanges Importers, Suppliers of Spectacle Blind Flanges, Exporters of Spectacle Blind Flanges, Dealers of Spectacle Blind Flanges, Manufacturers of Spectacle Blind Flanges, Importers of Spectacle Blind Flanges Spectacle Blind Flanges weld neck, socket weld, threaded, blind, slip on, lap joint and reducing type to ANSI B 16.5 from 12" to 24" and classes150 to 2500 (complete range) We manufacture Spectacle Blind flanges from 12" to 60" and from classes 150 to 900 lbs (in accordance with MSS SP 44 standard) Our range of Spectacle Blind Flanges long welding neck are available from classes 150 to 2500 lbs and in sizes from 12" to 24" The complete range of orifice flanges are availaible from 1" to 24" and in class from 300 to 2500 lbs in accordance with ANSI B 16.36 Flanges in sizes 26" to 48" and class 150 to 600 lbs to BS3293 Offering flanges as per the standards API 605ASME B16.47 AWWA and light type Spectacle BlindFigure 8 Blank according to API 590ASME B16.48 Flanges to API 6A std for well head equipment.

Sanghvi International is acknowledged as a manufacturer, exporter & suppliers of Slip On Flange & Stainless steel Flanges (Gr. 304, 304L, 316, 316L) available in a variety or grades, materials, and finishes, in metric and inch sizes. These Slip On Flange are manufacture in different Material of Flanges like SORF Flanges, Carbon Steel Slip On Flanges, Stainless Steel Slip On Flanges, Alloy Steel Slip On Flanges, Duplex Steel Slip On Flanges, Inconel Slip On Flanges, Monel Slip On Flanges, Hastelloy Slip On Flanges, Copper Nickel Slip On Flanges in India & Asia, conform to Slip On specifications. The flange is slipped over the pipe and then welded both inside and outside to provide sufficient Strength and prevent leakage. This flange is used in preference to weld necks by many users because of its lower cost and the fact that less accuracy is required when cutting pipe to length. SLIP-ON FLANGE, SO FORGED FLANGES PRODUCTION RANGE Size: 1/2″ (15 NB) to 48″ (1200NB) Standards: ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings Pressure Ratings: Class 150, Class 300, Class 400, Class 600, Class 900, Class1500, Class 2500 | PN6, PN10, PN16, PN25, PN40, PN64 etc. Carbon Steel Slip-on Flanges: ASTM A105/A105N, A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2, A694 F42, F46, F48, F50, F52, F56, F60, F65, F70, A516.60, 65, 70 (Spectacle Blind Flange, Spacer Ring/Spade Flange), Steel RST37.2, C22.8 Stainless Steel Slip-on Flanges: ASTM A182 F202, F304/304L/304H, F316/316L, F316H, F316TI, F310, F321, F904L Alloy Steel Slip-on Flanges: ASTM A182 F1, F5, F9, F11, F22, F91 Special Alloy Slip-on Flanges: Duplex, Super Duplex, Nickel Alloys Flange Face Type: Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ) Coating/Surface Treatment: Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized Value Added Services: CNC Machining, Customised Flanges Sizes for Slip On Flanges All Slip On Flanges are available available in sizes from 1/4” through to any size. Wall Thickness for Slip On Flanges Schedule 5s through to Schedule XXS and heavier.