FountainHead Alloys Opera House, Mumbai, Maharashtra

We are manufacturing & exporting of high quality stainless steel sheets, stainless steel plates, stainless steel coils in thickness of 0.3mm to 120mm. That have found extensive applications in various industries. We also deal in nickel and copper alloy, stainless & duplex steel, carbon & alloy steel, are the materials which are used for designing of stainless steel sheet, plate and coil. We offer various grades of stainless steel plates & stainless steel sheets link ss 316 plates, ss 316l sheets & ss 304 plates etc.

We are offering waspalloy. Waspaloy is a precipitation hardening, nickel-based alloy which has been used in elevated temperature applications. The alloy has been used for gas turbine engine parts which require considerable strength and corrosion resistance at temperatures up to 1600°f (871°c). Waspaloy is usually vacuum-induction plus consumable electrode remelted. Waspaloy has excellent resistance to corrosion by combustion products, encountered in gas turbines and aircraft jet engines, at temperatures up to 1600°f. Intergranular oxidation occurs at temperatures above 1600°f.

We are offering globe valves, butterfly valves, ball valves, gate valves, check valves & all types of bellow sealed valves delivers, value added flow control solution to nuclear power plant, petrochemical, oil & gas, refinery, steel & allied industries, paper & pulp industries, power industries, marine & fpso, sugar industries, pharmaceuticals, food industries.

Brand Name : In-House

Material : As per Specs

Titanium alloys are generally classified into three main categories: alpha alloys, which contain neutral alloying elements (such as sn) andor alpha stabilizers (such as al, o) only and are not heat treatable; alpha + beta alloys.

Size : 5 TO 500MM DIA

Brand Name : VSP, ISMT, JINDAL, TATA

Size : 5 TO 500MM DIA

Brand Name : IMPORTED

We are offering tube fittings, biopharm fittings, dielectric fittings, flange fittings, flare fittings, pipe fittings, vacuum fittings, weld fittings and more.

Brand Name : In-House

Material : As per Specs

Nitronic stainless steels are austenitic, high-strength, corrosion-resistant products that provide higher-performance alternatives to many conventional 300 and 400 series stainless steels. Available in ingot, billet, bar, wire, plate and master melt products, nitronics offer approximately twice the strength of 300 series stainless steels. Nitronic alloys provide excellent mechanical properties at both sub-zero and elevated temperatures, impact resistance at low temperatures and, superb resistance to high- temperature oxidation yet retain good weldability and fabricability, and remain non-magnetic even after extensive cold working. nitronic 32, nitronic 33, nitronic 40, nitronic 50, nitronic 60.

We are offering maraging steel. The 18% ni-maraging steels, which belong to the family of iron-base alloys, are strengthened by a process of martensitic transformation, followed by age or precipitation hardening. Precipitation hardenable stainless steels are also in this group. Maraging steels work well in electro-mechanical components where ultra-high strength is required, along with good dimensional stability during heat treatment. The 18% ni-maraging steels, which belong to the family of iron-base alloys, are strengthened by a process of martensitic transformation, followed by age or precipitation hardening. Precipitation hardenable stainless steels are also in this group. Maraging steels work well in electro-mechanical components where ultra-high strength is required, along with good dimensional stability during heat treatment. Several desirable properties of maraging steels are: ultra-high strength at room temperature simple heat treatment, which results in minimum distortion superior fracture toughness compared to quenched and tempered steel of similar strength level low carbon content, which precludes decarburization problems section size is an important factor in the hardening process easily fabricated good weldability.

Certification : Chemical TC

We are offering inconel® alloy x-750 (uns n07750w. Nr. 2.4669) is a precipitation-hardenable nickel-chromium alloy used for its corrosion and oxidation resistance and high strength at temperatures to 1300°f. Although much of the effect of precipitation hardening is lost with increasing temperature over 1300°f, heat-treated material has useful strength up to 1800°f. Alloy x-750 also has excellent properties down to cryogenic termperatures. The economics of inconel alloy x-750 coupled with its availability in all standard mill forms has resulted in applications in a wide variety of industrial fields. In gas turbines, it is used for rotor blades and wheels, bolts, and other structural members. Inconel alloy x-750 is used extensively in rocket-engine thrust chambers. Airframe applications include thrust reversers and hot-air ducting systems. Large pressure vessels are formed from inconel alloy x-750. Other applications are heat-treating fixtures, forming tools, extrusion dies, and test machine grips. For springs and fasteners, inconel alloy x-750 is used from sub-zero to 1200°f. Depending on the application and the properties desired, various heat treatments are employed. For service above 1100°f, particularly where loads are to be sustained for long times, optimum properties are achieved by solution treating (2100°f) plus stabilization treating (1550°f) plus precipitation treating (1300°f). For service below 1100°f, the alloy may be strengthened by precipitation treating after hot or cold working or by precipitation treating after equalizing or solution treating. A furnace-cooling treatment is also used to develop optimum properties for some applications.

Inconel is a family of austenite nickel-chromium-based superalloys. Inconel alloys are oxidation and corrosion resistant materials well suited for service in extreme environments subjected to pressure and heat. When heated, Inconel forms a thick, stable, passivating oxide layer protecting the surface from further attack. Inconel retains strength over a wide temperature range, attractive for high temperature applications where aluminum and steel would succumb to creep as a result of thermally induced crystal vacancies. Inconel’s high temperature strength is developed by solid solution strengthening or precipitation hardening, depending on the alloy. Inconel alloys are typically used in high temperature applications. Inconel alloys are oxidation- and corrosion-resistant materials well suited for service in extreme environments subjected to high pressure and kinetic energy. When heated, Inconel forms a thick and stable passivating oxide layer protecting the surface from further attack. Inconel retains strength over a wide temperature range, attractive for high-temperature applications where aluminium and steel would succumb to creep as a result of thermally induced crystal vacancies. Inconel's high temperature strength is developed by solid solution strengthening or precipitation strengthening, depending on the alloy. In age-hardening or precipitation-strengthening varieties, small amounts of niobium combine with nickel to form the intermetallic compound Ni3Nb or gamma prime (γ'). Gamma prime forms small cubic crystals that inhibit slip and creep effectively at elevated temperatures. The formation of gamma-prime crystals increases over time, especially after three hours of a heat exposure of 850 °C, and continues to grow after 72 hours of exposure.

Certification : Chemical TC

A nickel-base alloy with an exceptional combination of oxidation resistance, fabricability and high-temperature strength. Hastelloyis a nickel-chromium-iron-molybdenum alloy that possesses an exceptional combination of oxidation resistance, fabricability and high-temperature strength. It has also been found to be exceptionally resistant to stress-corrosion cracking in petrochemical applications. X alloy exhibits good ductility after prolonged exposure at temperatures of 1200, 1400, 1600°f (650, 760 and 870°c) for 16,000 hours. Hastelloy has excellent forming and welding characteristics. It can be forged and, because of its good ductility, can be cold worked. X alloy can be welded by both manual and automatic methods including shielded metal arc (covered electrodes), gas tungsten arc (tig) and gas metal arc (mig). The alloy can also be resistance welded. Hastelloy plate, sheet, strip, bar, tubing and pipe are covered by asme specifications sb-435, sb-572, sb-619, sb-622 and sb-626 under uns number n06002. Wrought forms of hastelloy are furnished in the solution heat-treated condition unless otherwise specified. Hastelloy is solution heat-treated at 2150°f (1177°c) and rapid cooled. Bright annealed products are cooled in hydrogen. Hastelloy is available in the form of plate, sheet, strip, billet, bar, wire, covered electrodes, pipe and tubing.

Material : Hastelloy

Application : Industrial

Thickness : 10-50 Mm

Color : Silver

Finishing : Polished

We are offering flanges. The petrochemical, process, and waterworks industries. Ansi, api, awwa pipe flanges in carbon steel , stainless steel , alloys and chrome steel. Weld neck, slip on, blind, threaded, socket weld, lap joint, orifice flanges, ring, and custom flanges in sizes 12" to 203". Pressure classes - 75, 125, 150, 175, 250, 300, 350, 400, 600, 900, 1500, 2500, 5k, 10k, 15k, 20k. High yield - low temp.

Brand Name : In-House

We are offering industrial fasteners. Standard industrial fasteners in high tensile, structural steel & weathering steel which is crucial importance to the industries at large. Having acheived consistency in manufacturing quality & reputation, it expanded its product range & material as well. Torqbolt offers 2700 in line items spreaded over 5 international standards viz din iso en is astm asme. Offering high tensile,structural steel,weathering steel,high temperature alloys, low temperature alloys, high carbonlow carbon, marine grade alloys, stainless steel, duplex steel alloys, super duplex steel alloys, nickel based alloys viz, inconel,incoloy,monel,hastelloy,alloy 20, 6 moly alloys,durahete, tantalum,titanium, copper & copper nickel based alloys, aluminum & aluminum bronze alloys,phosphor bronze alloys, silicon bronze alloys, astm materials for fasteners, asme coded fastener material etc

Grade : AMS 5715

Material : Inconel

Application : Structure Pipe, Gas Pipe, Hydraulic Pipe, Chemical Fertilizer Pipe, Pneumatic Connections

Brand Name : FHA

Type : Forged Block

Color : Blue

Brand Name : FHA

Grade : Al2017

Color : Silver

Diameter : 5mm to 500mm Dia

Thickness : 0.5 to 50mm

Material : Aluminium

Application : Manufacturing, Construction, School/College Workshop

Grade : Aluminium 7075

Brand Name : FHA

Thickness : 0.5 to 50mm Thick

Material : UNS A97075

Shape : Sheet

Size : 4Inch

Certification : EN 3.1 Inspection Report

Alloy steels are made by combining carbon steel with one or several alloying elements, such as manganese, silicon, nickel, titanium, copper, chromium and aluminum. These metals are added to produce specific properties that are not found in regular carbon steel. The elements are added in varying proportions (or combinations) making the material take on different aspects such as increased hardness, increased corrosion resistance, increased strength, improved formability (ductility); the weldability can also change. The most important and desired changes in alloy steel are: increased hardenability. Increased corrosion resistance. Retention of hardness and strength. Nearly all alloy steels require heat treatment in order to bring out their best properties. alloying elements & their effects chromium – adds hardness. Increased toughness and wear resistance. Cobalt – used in making cutting tools; improved hot hardness (or red hardness). Manganese – increases surface hardness. Improves resistance to strain, hammering & shocks. Molybdenum – increases strength. Improves resistance to shock and heat. Nickel – increases strength & toughness. Improves corrosion resistance. Tungsten – adds hardness and improves grain structure. Provides improved heat resistance. Vanadium – increases strength, toughness and shock resistance. Improved corrosion resistance. Chromium-vanadium – greatly improved tensile strength. It is hard but easy to bend and cut.