Furnace Burners Dealers in Mumbai

Lafil industrial burners are pressure jet spill return fully automatic with stepless modulation & operate on oil, gas & dual fuels. They have been designed & manufactured to high standards in order to meet the widest demands. The burners can be used on a wide range of equipment like boilers, hot oil heaters, hot air generators & furnace. High turndown ratios can be achieved without deterioration in combustion quality. Operation can be totally automatic and dual fuel burners can also be supplied for combined fuel burning. Lafil burners are designed for low excess & are totally compatible with on line oxygen trimming systems which regulate excess air thus ensuring good combustion at all loads. Lafil also supply oxygen trimming systems for all suppliers. Custom made burners for fuels like blast furnace gas & other lean gases can be supplied on request. Proper selection of burner is based upon factors such as equipment capacity, furnace pressures, type of load & design of furnace. The burners can be supplied with blower, control panel, oil pumps, oil preheaters, duplex filters & gas trains etc.

We are offering industrial gas burner. Retrofitting of existing boilers with energy efficient burners from international makes like saacke, weishaupt, nuway etc. Our team has worked with almost all burners and the exposure helps us to handle any burner with ease.

  Our industrial gas burners are widely used because of their quality performance, functionality and simplicity in use. Durability, simplicity in use and negligible maintenance defines our products better. The category encompasses.

• Feature: High Eficiency Cooking
• Dimension: 520×440×310 mm
• Warranty: 1 Year
• Air Pressure: 0.05-0.1 (MPa)
• Heat Range (BTU/H): 000-200
• Fuel Input (KG/H): 2-5
• Power Supply (AC): 220V/110V
• Heat Range (KCAL/H): 20, 000

We are offering Elco Fuel Oil Burners with mechanical atomization to our clients. Having monobloc structure, these are ergonomically designed allowing easy access to inner components.   The salient features are as follows Combustion tube, fastened on the front wall of the generator by a sliding clamp Sound-proof air box Support plate of components removable for maintenance Adjustment of air on pressure side Closing of air shutter in stopping condition by return spring or hydraulic control 1 or 2 pressure stage pump with solenoid valve(s) Hoses for fuel feed, 1.2 m long with G3/8 adjustment couplings supplied Complete electrical wiring with connection by 7-pole plug and 4-pole connector for the 2- rate types 2800 rpm motor Single-phase power supply 230 V / 50 Hz / 3.A (60Hz on request) LOA 24 control box Quick removal of cabinet support Flame control by removable photoresistive cell Removable protective hood 60 to 350 kw Fully automated blown-air burners Meet the applicable requirements of EN267, EN60335, EN55014, EN55104 standards. Fit all heating equipment, thanks to pressure adjustment and air flow devices Enjoy low level noise, as a result of the optimized configuration of the ventilation and insulated air box Elements and internal parts are easily accessible, without prior removal of the fuel piping, simply by turning round the support plate of the components. The EL02/03B range includes various modes of control and operation types matching most applications

  Main features:   • Aluminium casing up to MULTIFLAM 200.1 and steel casing from 300.1 with electrical panel IP54 on board • Adjustable combustion head for fine-tune regulation and matching with different combustion chamber • Two stages version with electric servomotor and integrated system for the regulation of air gas and heavy oil with two nozzles for MULTIFLAM 200.1 • Progressive version with electrical servomotor and double adjustable mechanical cam that allows air gas/heavy oil fine tuning • Progressive modulating nozzle with flow and return. Shut down flow system on the nozzle managed by coil from MULTIFLAM 700.1 • Digital thermo regulator “GEFRAN” integrated onthe front panel for granting the temperature stability of the oil fuel from MULTIFLAM 300.1 • MULTIFLAM is available in two-stage gas / heavy oil - max viscosity 50°E at 50°C, and two-stage progressive mechanical gas / heavy oil • Modulating version with PID system controller with digital set point display and real time value • Separate gas train (available for different inlet gas pressure) easy to assemble into the burner. Gas pilot included in the combustion head with separate supply line • Configurated and special version on request for selected type of applications and fuel characteristics. • DUOBLOCK and ELECTRONIC versions are available on request for selected output to match main boilers and industry applications.

Hi-Therm manufactured Furnace Gas Burner: Our furnace gas burner series is used on almost any kind of industrial furnace, ovens, air heaters and kilns. These burners are also called high temperature gas burners since they have a high temperature output. These burners are nozzle mix type burners which provide medium velocity flame with wide air/fuel ratio and turndown flexibility. Furnace gas burner is made of cast iron body with gas connection to give steady, reliable and proven performance. The air tube is made of Stainless steel material for higher temperature application, it is an Inconel material. These burners also have an observation port in the back of gas connection and a provision for pilot gas burner and flame detector. Furnace gas burner is also operated fully automatically with auto ignition system and Hi-Therm’s sequence controller with Ionization Rod/UV Cell as the flame supervisor. They are also available in On/Off models or High/Low models and PID controlled with the incorporation of flame controller. These burners work best with LPG.   Features : Highly robust construction Auto-ignition, fuel control and flame sensing systems models available Suitable for high temperature application Duo-bloc burners Highly reliable as furnace burners Models with facility of pre-purging available Wide Air/Fuel ratio Available in On/Off and High/Low models with PID controller incorporated with flame controller  

• Capacity: 0.17 MKcal/hr to 21 MKcal/hr

Low calorific value gaseous fuels mainly Producer Gas Coal Gas BF Gas can be burnt efficiently,All burners are modulating type with high turn down ratio (1 : 5) and suitable for continuous modulation,Can be supplied for combustion air temperatures upto 400 degree C,Separate fan increases firing flexibility like high furnace back pressure or air pre-heating or no reduction in burner output capacity.

Non-IBR four pass fully steam generating boiler in oil fired | Oil Gas Solid Fuel Fired fully automatic thermic fluid heaters | Fully automatic hot air generators in oil fired design for drying applications | Fully automatic oil gas fired (Pressurized Non - Pressurized) | Hot Water Generators | Fully Automatic Oil Gas Electric Heated Mini Steam Generators •Two Stage Operatiion • Three Stage Heavy Oil or Modulating

• Type: Kiln Burner
• Material: Stainless Steel
• Application: Kiln Use
• Color: Silver
• Feature: Easy To Clean, High Efficiency Cooking, Light Weight, Non Breakable, Rust Proof
• Condition: New
• Automatic Grade: Semi Automatic
• Country of Origin: India
• Features: Smooth edges, Crack proof, Heat resistance, Perfect finish

Flame adjustment system: the burner is easy to operate, delivers repeatable flame shaping and limits the operational risks associated with improper flame setting in the kiln. Pillard NOVAFLAM® delivers an optimum flame momentum thanks to the reduced burner pressure drop and a unique patented tip design allowing a quick suction of the secondary air into the flame root for hottermore intense flames.

We are Offering heavy Oil Burner.

• Feature: Low NOx emissions • High Efficiency • No complicated refractory stabilizers or baffles

These burners recovers waste heat from furnace exhaust gases to preheat combustion air to significantly reduce fuel consumption over conventional burners or burners with recuperators. These burners have exceptionally low NOx emissions and high fuel savings make it a perfect option for high temperature furnaces. The higher the process temperature, more is the saving potential.

Jet Burner System used for melting scrap and save Electrical Energy in Electric Arc Furnace(EAF). Nikko designs and supplies various types of burners like EBT, Door and Hybrid Burners. Burner System allows operation of EAF with multi-pattern oxygen injection that allows more efficient chemical energy utilization. It enhances uniform melting, effective Oxygen blowing and promotes slag foaming. Burner System shortens tap to tap time, reduces power and carbon consumption and improves molten steel yield. With use of multi-mode pattern program and touch panel, fully automatic operation is possible. Lastly, it improves safety as it eliminates lancing from Slag Door of EAF.

• Feature: Monobloc construction , Fully automatic operation

All models are of nozzle mixing type and are available in OnOff function for low capacity range and with HighLow function and PID controlled stepless modulation for high capacity range. For automation and control systems, Hi-Therm’s sequence controller is used to facilitate easy operation of these highly efficient burners. These burners are manufactured with best quality equipment from our vendors and can be customized as per your requirement.

• Certification: RoHS
• Material: Copper and Fiber
• Country of Origin: Made in India
• Voltage: 440 V
• Features: Combustion air is fan blown, Flame supervision is by flame relay and U.V. flame sensor.
• Phase: 3 Phase
• Type Of Industrial Burners: Gas Industrial Burners
• Frequency: 50 Hz
• Power Source: Electric

Vinayak industries high pressure burners are widely used on heat treating and melting furnaces, incinerators, chemical process equipment. High pressure burners are provided with C.I. front mounting plate, 1 no. primary butterfly valve, 1 no. secondary butterfly valve, 1 no. gun metal micro valve for fine oil control, 1 no. air body. High pressure burners are Duel Fuel Burner suitable for light oil, heavy oil and gas. Required air pressure between 800 mm to 1000 mm swg.Required oil pressure between 1.5 to 3.5 kg and cm Above burners can be provided with spark plug, pilot burner, burner block, P.I.D. control for Low fire and high fire. Product Features : Primary and secondary air butterfly valvesFor light oil /heavy oil and CNG/LPG gasOil pressure between 1.2kg/cm2to 3 kg/cm2Air pressure between 700 mm SWG to1000 mmHighly durableCorrosion resistantAbrasion resistantStable flame Applications : For Oil Fired Furnaces Uses : Industrial heatingHousehold heating

• Material: Iron
• Fuel Type: LPG
• Capacity: 50 - 500 KW
• Usage/Application: Industrial
• Is It Rust Proof: Rust Proof
• Corrosion Resistance: Yes

• Brand Name: Combustion
• Voltage: 12 - 24V DC
• Head: 40 Meter
• Pressure: Maximum 15 bar
• Size: 40-45mm

We manufacture, export, import and supply a wide range of Heavy Oil Burner to our clients. These Heavy Oil Burners are available at industry leading prices with us. Fabricated with advanced technology, our Heavy Oil Burners are being highly appreciated for their supreme quality. Features Appropriate for liquid fuels with velocity up to 40cSt at 1000C.Useful for all sorts of heat, steam and boilers, incinerators and furnaces.Also useful for fabricating other manufacturing process applications. Brands Available ELCO KLOCKNERECOFLAMEWEISHAUPTBENTONERIELLOCUENOD