Furnaces Dealers in Andheri East, Mumbai

MTF, an India based specialist Crucible Furnace manufacturers, exporters and suppliers in Mumbai,India. It is one of the most well known products listed on the portfolio of MTF. The product is designed by an expert team of technicians who understand various needs of our clients and have tried to cater to them via use of latest technology. Technology allows us to offer Crucible Furnaces that are very efficient in operations and allows near zero down time.Stationary Furnaces: We have supplied many Electric Holding Furnace for Die casting application & have exported Gas & Oil Fired Aluminum Melting & Holding Furnaces.

High vacuum furnaces, The furnace has effective hot zone size 350x250x450 mm (14”x10”x18”) & load capacity of 100 Kgs. (200 lbs).Treated parts are heated very homogeneously in a temperature range between 150 °C (300°F) and 1315 °C(2400°F) and under vacuum level of 10-5 Torr range. With advanced PLCHMI control system , furnace complies to NADCAP requirement “ Furnace is highly flexible since it can be used for hardening with high pressure gas quench and brazing application under high vacuum for complex aerospace parts” Mr. Oguzhan Kocaman Quality Manager, quoted after completing the production trials.

Blast Furnace Slag is a by-product from the manufacturing of steel in a blast furnace. Initially in its molten form, it is diverted to a granulator where it is quenched with water and rapidly cooled to form glassy, non-metallic granules which are silicates and aluminosilicates of calcium. These granules are dried to produce Granulated Blast Furnace Slag (GBFS).Due to stringent quality control in the steel production process, the chemical composition of its by-product GBFS is highly stable. Regular checks are carried out on the granulate to monitor the amount of glass produced as a control on the effectiveness of the quenching process. GBFS is light in color, around 3mm down to dust in size and has a relatively high moisture content. The material is allowed to drain by stocking in heaps for sufficient time.GBFS is ground to a suitable fineness to produce Ground Granulated Blast Furnace Slag (GGBFS), which is used as a cementitious material in concrete to enhance long-term performance and durability characteristics while reducing life-cycle and maintenance costs. With the poor quality, contamination (silt, clay, etc.) and depletion of natural sand, as well as significant negative environmental impact of crushed sand (rockgranite), GBFS has found its way as an effective replacement of natural sand crushed sand in concrete as a fine aggregate. Advantages include reduction of cement content, higher reactive silica and negligible silt content, improved strength, reduced permeability and chemical attacks, increased durability, lower shrinkage cracks, better cohesiveness and workability, improved bonding and smoother finish.

• Production Capacity: 1500 Kg / Hr
• Charge Size: 25 to 100 mm OD x 3 to 8 mm thk
• Operating Temp: 1000 °C (max)

we offer this in different range and specification. We have successfully designed, installed & commissioned roller hearth furnaces in the market.We are backed by highly experienced technical experts who ensure the durability, reliability & longer functional life of our furnace. Roller hearth furnaces are utilized in various heat treatment process.According to type of heat treatment, they are extended to full computerization by oil, salt or gas extinguishing frameworks and in addition fringe hardware.

  car bottom furnace / kiln are custom build furnaces for various heat treatment processes of large / big components. The general arrangement is rectangular horizontal chamber constructed out of refractory with high service temperature, with vertical lifting counter balanced insulated door. The bogie can be loaded manually / completely mechanized. The centralized control panel is floor mounted.applicationshardening *annealing *stress relieving *normalizing *pack carburizing *gas carburizing *gas nitriding *gas carbonitriding *bright hardening *stress relieving *tempering * glass thermoforming *glass slumping *glass tempering *glass fusing *glass bending *glass decorationfeaturessturdy construction *uniform temperature *precise control *effective insulation *firm sealing *smooth door operation *separate control panel.

Muffle Furnace is available in Rectangular horizontal shape with powder coated, complete with indicator lamps,installed with digital temperature controller and more.

• Power: Single Phase
• Material: Mild Steel
• Weight: 20 kg
• Brand Name: SSC
• Country of Origin: Made in India
• Melting Material: Metal
• Material Loading Capacity (T): 1Kg - 10kg
• Power Source: Electric
• Max Temperature: 1200 Degree Celsius
• Rated Power (KW): 4KW
• Input Voltage (V): 220 V
• Melting Time: 8 Minutes
• I Deal In: New Only
• Automation Grade: Automatic
• Model Name/Number: SSC-10

The melting furnaces for taste ashes of the FFC series are used to melt the ash of precious samples and obtain a rectangle containing the noble metals present in the ash. The heating part of the furnace FFC / A is built with heating of silicon carbide rods that can deliver a maximum power of 2 kW on each of the 3 groups of resistors. This power is adjusted automatically by means of electronic control of each phase, so that the operator avoids having to intervene manually in order to maintain the constant absorption over the three phases. This allows a long-term resistances. In the oven FFC / I on the other hand, the heating of the crucible takes place by means of an induction medium-frequency converter. The furnace is provided with collector for the sliding of the suction with adjustment damper fumes. Refreshed in design and performance, allow to reach the operating temperature in a very short time, with consequent energy savings and optimization of working cycles. Both ovens are equipped with a software for the control of the manufacturing process: • Change the set point temperature • rise time adjustment and temperature descent • Adjusting retention time    

We manufacture and export the high caliber bogie hearth furnaces that are used for following applications: Annealing Normalizing Hardening Stress Relieving Solution Annealing Tempering, and so on. These applications are related to different grades of Steels in form of castings, forgings, fabricated components, etc. The furnace includes unique features that are cited below: Top caliber Increased performance output Mechanized bogie drive Excellent temperature uniformity Close temperature control by P.I.D controllers Superior type insulation suitable for the hot gas circulation Separate combustion section Uniform properties of heat-treated parts Ideal for long sections, coils and castings Sturdy bogie design to take care of charge weight

Specification  In put voltage  :  230V / 430V AC. 3phase Outer body  :  MS. Powder Coated. Dimension   1kg  :  15”(L) x 15”(B)  x 27”(H) inches                                                                5kg  :  24” (L) X(24”) (B) X 32” (H)  inches 10 kg  :  28 x 28 x 50 inches ( L X B X H ) 20 kg  :  36  x   36  x  72  inch  ( More Than this is also available) Temperature   :   0 to 1200 Zc Features - Minimum Gold Loss compared to other machines. - Better Crucible life. - Large Crucible for scrap-no need to cut jewelry. - Low power consumption. - Portable Trolley, Mounted compact cabinet. - Pollution free. - Easy to operate. - Long lasting coil. - Compact portable trolley mounted cabinet - Manual or Tilting system

• Brand Name: Sladjana Sales Corporation
• Melting Material: Gold
• Material Loading Capacity (T): 5 Kg
• Power Source: Electric
• Type Of Furnace: Fix
• Rated Power (KW): 2 kW
• Input Voltage (V): 380 V
• Melting Time: 2-5 Min
• Max OperatingTemperature: 500 Deg C
• Automation Grade: Semi-Automatic

• Type Of Model: Laboratory
• Power Source: Electric
• Air Pressure Requirement: 0-2kg(max)
• Dimension: 460 x 480 x 280mm
• Net weight: 30kg
• Power Supply: 1phi,230 V AC,1kW

Tenova is a leading company in the design and supply of high-capacity electric furnaces (ac, dc), submerged-arc smelting furnaces and complete smelting plants for the production of ferroalloys, base metals, slag cleaning and alloy refining. We are industry specialists in solid liquid separation and mineral processing applications for the minerals, chemical and industrial markets offering flotation, sedimentation, filtration, screening and gravity separation systems. With a long and successful history in the ferroalloy industry Tenova also designs and supplies equipment for material handling and pre-treatment, alloy conversion and refining, granulation of metal, matte and slag, furnace off-gas fume collection and treatment, treatment of hazardous dusts and wastes.

Biolab muffle furnace is ergonomically designed which provides efficient, reliable operation and enhanced chamber uniformity at high temperatures. They have been crafted for heavy duty operation. They provide minimum heat loss and optimized insulation. Chamber is heated by electric resistance heaters. The built-in fan system allows the abrasive gases come out of the furnace through a chimney. Basic specification : dimension: 360x480x540 mm inner dimension: 130x105x230 mm maximum temperature: 950°c working temperature: 950°c amperage (imax): 6.6 a

Hardening Furnaces, rotary carburising furnace, Tempering Machine

Specially designed for de-waxing and bum-out, and an optional programmer, jewellery casters can be sure that this furnace which fulfills their needs, heated stainless steel floor. Built In chimney for efficient fume extraction. Maximum space for flask. Normal operating temp.

Specially designed for de-waxing and bum-out, and an optional programmer, jewellery casters can be sure that this furnace which fulfills their needs, heated stainless steel floor. Built In chimney for efficient fume extraction. Maximum space for flask. Normal operating temp. 800 0 C Rugged construction ensuring long life and maximum productivity. Extra wax tray. Safety door switch. Easily replaced elements.   Specification:  Size:4 , 6, 9, 12, 16, 24, Flask. Temperature: 1200 Degree Celsius Electrical Load: Defend on the Flasks. Supply : 230 V. AC. &  440 V. AC.  

• 230 volt: Single phase

We offer Induction Melting Furnace. Features: * inbuilt heat reduction system. * digital temp control. * very fast melting & save power and time. * light weight body.