Gandhi Fabricators Malad West, Mumbai, Maharashtra

Motorized sliding gates (conventional) are gates which use a ground mounted track for the gate wheels to move on. Tracked sliding gates can have larger opening widths. A pedestrian gate can be combined with these type of gates or a separate pedestrian gate can be built. Company can produce motorized sliding gates as per client’s requirements.   Planned and fabricated with superior square or rectangular hollow sections, along with MS sheets and flats collected by high quality welding Gates are beautifully designed and the pre-tensioning of the gate leaf construction diminishes the risk of bending Varied choice of models for gates weighing from 300 kg to 18000 kg Manual operation in case of power failure Highly condensed dimensions & very silent operation. Built-in anti jerk device stops damage to the automatic system Startup at extreme power permits the motor to overcome any initial friction caused by ice, dust, etc. Motor protected by an internal thermal switch Problem detection causes the gate movement to stop if an hindrance is detected The advance electronic control unit licenses operation time adjustment, partial opening, reflex closing, step by step control, stop safety, reverse safety etc

The widespread and broadly used amongst all the categories of doors is the motorised rolling shutter the figurative feature of our motorised rolling shutters is its hard assembly gained due to the use of sturdy metals in the formation of slate and guide profile. This feature performances as a shield and safeguard against theft, damage & hurricanes. Our motorized rolling shutters are easy to function and confirm client gratification. Our motorized rolling shutters and doors are factory-made in our state of art manufacturing facility and the plant has a capability to produce 6000 rolling shutters in a month. Motorized Rolling Shutters by Gandhi are typical, are perfect for circumstances where side room is less and security is required. Our Rolling Shutters need very less headroom above the structural opening. They combine strength with elegance along with toughness and are designed for both external and internal applications. Automatic Rolling Shutters are made-up of interlocked Galvalume, Galvanized Insulated and Non Insulated, Stainless Steel, Patented Aluminum profiles and patented Bright Steel Bar Rolling Grills. Automatic Rolling Shutters are strongly built to endorse trouble-free process and long life. The Motorized Rolling Shutters can also be planned as per customer’s conditions or conforming to IS6248. All our Rolling Shutters are automatic using vigorous drive expertise with manual override in case of power failure and are dense, noiseless, and dependable with low decibel level. We can manufacturing motorized rolling shutters to a maximum width of 30,000 mm and height of 40,000 mm with boundless array of choices to please both artistic deliberations as well as working prerequisite.

Retractable Gates offered by Gandhi Automations stances out amongst others because they blend flawlessly with its surroundings. They not only match the building installed with the gates, but are a piece of eye- catching architectural work with high functionality and artistic value. It is said that when technology progresses to the highest stage, it climbs into art. The premium combined head unit is the result of such a exclusive combination of technology and art. This state-of-the art head unit is made of high accuracy, high forte plastic and weight improved materials. Incorporated with the maximum advanced features, plus intelligent control circuit, a world-leading spiral clutch technology and deluxe details the retractable gates lead the way into the acumen age in the industry. It is harmless, consistent, energy-saving, and offers excessive horsepower and starting stability. Above all, it can even task normally during a power failure.

The Retractable PVC front panels Dock Shelter is the most popular & used Accessible for dock level fitting, or for ground level fixing for the guard of doors without dock The front panels are made of high resistance black PVC protected with double interlacing of polyester that works like spring in order to cover the vehicles of different shapes.

Prime Reset is a unique high speed self-repairing door with the latest technology that prevents downtime of the door system. In the case that the curtain is impacted accidentally it will cause the curtain to move out of the guides without damage. The movement of the door is designed in such a way it can be recovered with a simple opening and closing operation. Gandhi Automations manufactures doors of the highest quality that meet the issue for greater flexibility desired by clients. High speed self-repairing door in PVC is the most suitable solution in the field industries, it lowers the time of transition from one facility to another, avoiding any human error which can cause damage to the high speed door, and all this thanks to the innovative ANTI CRASH SYSTEM. Gandhi Automations provides a world class product with great security.

Prime Plus rapid doors are mainly used for external application. The door is equipped with spring steel wind lock in curtain pocket that confirms silent door travel, higher wind loads and curtain stability. External Application and compact design. Industrial rapid door designed by us are self-supporting construction with anti-crash protect system, protects traction unit, enables rapid wiring and safety photocell. Rapid doors also has flexible curtain in self-extinguishing material, vertical seals made of friction-resistant semi-hard and PVC spring steel wind lock in curtain pocket ensure silent door travel, higher wind loads and curtain stability.

Industrial rapid doors for large openings are designed and developed for very wide openings where high speed and high cycle operation is required. Industrial rapid door with its unique folding design, strong driving belts, constructed of polyester - wear and traction-resistant, it can operate in the most diverse situations and even in windy conditions. Industrial rapid doors with larger opening are need in heavy engineering sectors like aviation, OEM’s In the opening of the industrial rapid door the belts lift up the curtain stacking the fabric in a concertina manner. It’s truly exceptional reliability and security is ensured by its motor fully concealed in the frame and its modular counterweighted system with the fast semi-automatic reopening device.    

Prime Atex High Speed Doors are designed, developed and certified to ATEX Directive to be used in potentially explosive atmospheres. The special casing of the motor and the control card prevents sparking. The anti static curtain is available in self-extinguishing material.

Prime Machine Protection Door are high speed doors that protect men and material from accessing in-motion automatic machines area. This door is especially developed for robotic or automatic machine areas and can be installed besides safety barricades or walls. Prime Machine Protection Door improves automation by isolating the area meeting high industry standards and reducing accidents. A durable and robust structure is designed to last in an industrial environment.    

Inflatable Shelters are elastomeric tubes calculated to round out with the overview of a medium (usually air) to form a close-fitting barrier between a mounting and striking surface. Inflatable Shelters deliver the most versatile seal offered to service the widest diversity of truck and trailer configurations. Different to other types of Dock Shelters, the truck does not push towards the shelter. In its place the shelter is inflated around the docked vehicle providing complete seaming.

Motorised Heavy Industrial Sliding Doors are excellent for large openings and are custom built to meet the requirements of our customers. They are ideal for industrial applications, both as external and internal doors where maximum door opening is required. The doors are designed for tough everyday operation, extremely sturdy, resistant to impact and effectively corrosion-protected.   Doors are constructed of 100% CFC free polyurethane high density insulated steel sliding doors of 80 mm, 120 mm or 150 mm thickness with protection against corrosion or corrugated PEB cladding sheet Minimum headroom required and is best suited for temperature controlled areas Top rollers made of self-lubricating nylon which ensures smooth and noise free movement of the door Hot galvanised material treated with primer and polyester resin offer optimum protection against adverse effects of the environment The stucco embossing on both sides of the door leaf makes the surface resistant to scratches Equipped with CE certified rugged and powerful drive unit, integral electronic control unit and built in contact-less magnetic limit-switch

Industrial Sectional Overhead Doors are ideal for all industrial and logistic needs and are built to help the highest ease and flexibility of use. Depending on the structure of the building and the necessity a choice can be made from a standard lift, vertical lift, horizontal lift, low headroom or inclined lift. The range comprises of extensive series of track systems, panel options and safety features. Superior glazed doors provide excellent lighting and vision into the building where required. Porto Sectional Overhead Doors are the ideal solution for all industrial and logistic needs. The design and different solutions offered ensure the door to be artistically pleasing and flawlessly suited in any architectural environment - from modern and traditional industrial buildings to fine commercial buildings. These doors are built to ensure the maximum ease and elasticity of use which, in turn, ensures a fast, hassle free and correct replacement of old doors. Our industrial overhead door installation is fast and simple due to smart product optimization without having to compromise on established quality. Many prefabricated parts prevents faults, reduce the installation time and increase efficiency. Industrial Sectional Overhead Door has pre-painted, galvanised steel, sandwich panel, thickness 40 mm, 80 mm and 100 mm The gaskets, made of a special non ageing rubber, seal the perimeter of the door opening. They produce a perfect seal, preventing water, air and dust infiltration Negligible bulk for more space indoors and outdoors Stress-free and practical to open and operate Energy savings and more ease Bright indoor environment and beautiful design Sectional Overhead Doors can be customised as Gas Tight Ripening Room Doors. Opening - Closing speed = 0.2 - 0.4 m/s. Sizes available : Width (max) = 15000 mm Height (max) =10000 mm  

Prime Conveyor is a high performance door which is developed specifically for conveyor systems. The door is designed to work in combination with the conveyor system for a very high number of automated cycles per day. Prime Conveyor is used to separate the operating areas and the storage areas in any automated production process. Environment in operating area has to be maintained at certain temperature and humidity level, one cannot allow passage of dust and dirt from storage area to operating premises. Prime conveyor industrial rapid doors are best suited in such situations. Gandhi automations can design and install doors of any size.    

Clean room doors (Prime Clean Reset) are designed for inside applications requiring limitation of leak flow. The perfect sealing properties of Prime Clean Reset provide environmental control and protect the inside environment against draughts, dust and dirt. Clean room doors provided by us also has self- repairing system. One of the most imperative aspects of clean rooms is the Door you choose for clean room facility. Time for which door is open will play a critical factor in avoiding dirt, temperature, humidity etc. Opening and closure of door has to quick enough to isolate the two areas. At Gandhi Automations Pvt Ltd we provide Clean Room High Speed Doors specifically designed for above purpose. Our Clean Room High Speed Doors are best suited for pharma industries where you need to have controlled environment. The opening and closing of door is fast enough to separate two areas.

Gandhi Sliding Aircraft Hangar Doors are recommended where no headroom is available and side clearances permitted. This type of door can either be bi-parting or uni-directional with each door section bottom rolling and top guided. Bottom rolling hangar doors are an excellent application for any pre-engineered or custom designed facility. They are 'bottom rolling', which means that their weight is carried by a bottom rail and not by the building structure above. These doors are designed to withstand wind load criteria and protect the indoors from all types of weather due to the advanced weather sealing system. The weather sealing system also maximizes energy efficiency. Tail Doors and integrated pedestrian doors, without threshold can be incorporated on the doors. Key Features Robust steel construction bottom rolling, sliding door State-of-the-art drive systems with user-friendly controls Multiple safety devices available Heights ranging from 6 metres to 40 metres and unlimited width Unlimited choice of cladding, glazing, colours and configurations Full weather-sealing Choice of glazing available Wicket doors provide personnel access  

Garage Doors open vertically, they slide upwards, then along the ceiling, through the guides provided, making them ideal when space is at a premium or when the garage door opens directly onto the pavement. Garage doors help in soundproofing and have a heat insulation coefficient, due to their insulated panels, which ensures insulation rating from heat/cold and contribute to saving energy.   Ceiling mounted sleek operator with state of the art encoder technology and with courtesy light Pre-painted, galvanized steel sandwich panels or sandwich panels with solid wood load-bearing structures Helps with soundproofing and thermal insulation Range of standard and optional safety device like pinch-proof guard, spring anti-break safety device, cable anti-break device, safety edge etc

Galvanised Insulated and Non Insulated Rolling Shutters   Galvanised Insulated and Non Insulated Rolling Shutters are designed for a variety of industrial, warehouse, loading docks and commercial uses. They combine aesthetically pleasing appearance with energy efficiency, robust construction and reliability. The shutters are custom made to fit any openings and are ideal for situations where sideroom is at a premium and security is required.

Galvalume Rolling Shutters are ideally suited for most types of Industrial and Commercial applications. The aluminium – zinc alloy coating offers excellent corrosion resistance. It retains the sacrificial properties of zinc relative to steel while aluminium provides a tough film of aluminium oxide to increase barrier protection. Galvalume Rolling Shutters continue to gain approval by specifiers, architects, building owners and many others due to its versatility, ease of use, aesthetics and long-term performanc.

Fire Rated Rolling Shutters are physical barriers that protect wall openings from spread of fire. They provide automatic closing in the event of fire detection. Gandhi fire rated rolling shutters are in the store which appear and function in the same manner as traditional single motorized rolling shutters. The only difference is the material used and the fitting type. These fire rated rolling shutters are designed to stay open under normal circumstances, and in the event of fire shutter close automatically to prevent the spread of fire to neighboring areas. The fusible integrated links melt at 74° C, this triggers the fire shutters to close automatically in the event of a fire.   Fire Rated Rolling Shutters with upto 4 hours, BS 476;Part 22: 1987 standard approved by Exova Warringtonfire, (AUSTRALIA) Pty Ltd. Alternately Fire Rated Shutters tested and certified to American Standards for upto 4 hours UL/FM label are also available. Constructed of galvanized steel in PU painted or stainless steel in a variety of gauges, slat designs and finishes for unsurpassed strength, durability and style. Automatic closing of the door in the event of fire detection by means of fusible link activated at 74°C. UL-listed brush-type smoke gaskets satisfy smoke retardation requirements. The operating system can be directly wired for activation by fire alarm systems or smoke detectors.

Gandhi Fire Rated Doors are ideal for wall openings where headroom is restricted and frames can butt up to a ceiling or fix directly to overhead lintels. The counterbalance on the fire sliding doors are linked to the fuse and closes the door only when the fuse breakdowns at a temperature of 74°C. The fire rated doors remains in a ‘normally open’ position and in the event of fire accident it closes automatically. Fire rated doors are available in single and double leaf options.   Fire Rated Sliding Doors are available in single and double leaf doors with a maximum size of 8500 mm x 6000 mm and fire resistant to DIN 4102 / UNI 9723. Ideal for large wall openings, also where headroom is limited frames can butt up to a ceiling or fix directly to overhead lintels. Braking devices and automatic control systems can keep doors permanently open, but close them in an emergency. Personnel access doors and wicket doors can be supplied without a bottom sill (threshold) allowing them to be used when the "parent" door remains closed. Fire resistant glazing can be fitted to access doors and sliding panels.

An emergency exit is incorporated with Prime Emergency Exit Doors. These doors are beneficial during an emergency evacuation. The Prime Emergency Exit Door curtain is inbuilt with transparent vision windows enabling to view on another side during an evacuation. The emergency passage can be pushed open when needed. This door acts as a usual high speed door during routine operations. The flexible PVC door curtain comes with a “T” cut in the center held together with a Velcro. When pushed at guided pressure points on the curtain, it opens up the curtain through the center allowing an access to exit during an emergency. The Prime Emergency Door curtain does not contain any rigid elements and is safe for your employees and materials.

Dock Levelers are the crucial part of your loading bay area. Usage of dock leveler aids in fast loading and unloading of goods at warehouse, moreover is also important from safety and security view. Dock leveler acts as bridge between loading bay area and truck, height difference between truck and bay area is bridged and material movement can be carried out smoothly between warehouse and truck. We manufacture dock levelers conforming to EN 1398 standards and our product is CE marked. Operation of dock leveler is very easy, unskilled labor can use perform operation with ease. Salient Features Its platform is welded using robotic arm and lip in almond anti-slip steel Single effect lift cylinder, double effect lip cylinder Security stop in case of unintentional departure of the vehicle. Maximum pressure valve Numerous sizes of rubber cushions offered Adjacent foot guard steel guards Tilt permits Dock Leveler to recompense for canted situation Maintenance prop to support Dock Leveler during maintenance checks

Thanks to its high insulation factor, the Cushion Dock Shelter is the idyllic solution for controlled temperatures The two vertical cushions have nonstop overlay anti-friction limpets permitting for the up and down hefty resistance of the vehicle on its suspensions, during the loading It is obtainable with fixed or adaptable horizontal top cushion, modifiable to different vehicle heights.

Gandhi Automations has a range of products for commercial and residential areas such as sliding doors and garage doors. Garage doors provided by Gandhi Automations blend in perfectly with surroundings and gives premium looks.