Gas Analyzers Dealers in Deonar, Mumbai

3-Phase 4-Wire Power Quality Analyzer Compliant to IEC61000-4-30 Class A Standards with Dynamic 1300V Range, Harmonic and Inter-harmonics Analysis Capabilities.

• Brand: BHOOMI ANALYZERS
• Country of Origin: Made in India
• Flow Rate(LPM)/(Nm3/hr): 1 LPM
• Application: Industrial / Medical
• Approval and Licenses: ISO
• Model No./Name: BHOOMI 420
• Automation Grade: Fully-Automatic
• Design: Standard
• Mounting Type: Handheld/ Table top
• Space Required (L*B*H): 215 (L) x 120 (B) x 40 (H) mm (Handheld Version) 257 (L) x 311 (B) x 65.3 (H) mm (Tabletop Version)
• Operating Temperature: Upto 45 degree C
• Operating Pressure: 1 kg/cm3

• Feature: 32-Bit Contex-M3 Arm Processor 5.7" QVGA TFT Touch Screen Display

The Agasthya series BI 7100 land fill gas analyzer has been designed for monitoring recovered and processed gases from landfill and biogas sites. This equipment continuously removes moisture from the wet sample gas and comes complete with pre-filter, sample pump, flow meter, continuous moisture removal system, long-life O2 sensor, infrared CO2 & CH4 sensor, alarm relay contacts, and 4-20mA outputs for each gas measured.

• Testable Gases: O2
• Test Range: 0 ∼ 21%
• Test Accuracy: 0∼ 2%: ±0.1%  2% ∼ 21%: ±0.2%
• Sampling Volume: >=5 mL (Standard Atmospheric Pressure)
• Instrument Dimension: 350 mm (L) x 330 mm (W) x 200 mm (H)
• Power Supply: AC 220V 50Hz / AC120V 60Hz
• Net Weight: 5 kg

• Automatic Grade: Automatic
• Brand Name: Systea
• Measurement Mode: Continuous
• Resolution: -0 to 10 ppm-0.001 ppm, -10 to 100 ppm - 0.01 ppm, -100 to 1000 ppm - 0.1 ppm
• Accuracy: better than 5%; SD% of 7 replicates at 20% of the full scale
• Material: MS
• Range: - 0.050 to 1000 ppm NH3
• Measurement Principle: Gas-Sensing Ammonia Probe
• Protection Type: IP55
• Output Signal: 4-20mA
• Sample Temperature: 10deg C - 30deg C
• Colorimeter: Dual beam, Silicon detector
• Measuring Interval: Programmable

• range: 0 to 10 ppm

Ammonia detection range of 0 to 10 ppm for the most direct, accurate and precise results available, Continuous online measurement ensures real-time information for optimum control of the ammonia feed without excessive operating costs, Selective and sensitive for ammonia, our system surpasses the performance of other systems that have the limitations of pH and conductivity to track real-time boiler ammonia levels, Extremely easy to use while maximizing up time � simple step-by-step scrolling instruction for setup, calibration,operation and diagnostics menus Measurements at a glance from any distance for even the lowest light conditions using the large operator friendly backlit display, Fastest and most stable measurements, limiting unnecessary calibration cycles due to drift with superior Orion ammonia electrode technology, Minimize operator time and maintenance without use of complicated moving parts or pumps that often require frequent attention and expensive spare part expenditures, Extend reagent consumption up to 2 months using our uniquely simple reagent addition design to condition the sample pH and suppress interfering ions for optimal measurement performance.

• Size: 580 x 335 x 140 mm
• Weight: 8.0 kg
• Ambient Temperature: 0-40 DegreeC
• Frequency: 50/60 Hz
• IP Rating: IP 65
• Rated Voltage: 100-240 VAC
• Model Name/Number: Digox 6.1 KS stationary

Blood gas analyzer utilizes the latest optical technology. This technology does not use electrodes or contact points, eliminating the need for costly electrodes maintenance. analyzer has a measuring chamber heated to 370 Celsius. This allows for a wide operating temperature range to meet the needs of colder environments such as the operating room. Reduce pre-analytical errors with automatic sample aspiration, bubble and clot detection and step-by-step picture instruction on the colour touch screen.

• Model: ADS
• Application: Industrial Use, Laboratory Use
• Brand Name: ADS

• Brand Name: Ohaus
• Automatic Grade: Automatic
• Display Type: Digital
• Color: White
• Accuracy: 1mg
• Output Type: RS232, USB Host, USB Device
• Model Name/Number: MB90
• Readability: 0.01%/0.001 g
• Power: 240 V AC
• Pan Size: 90mm
• Temperature Range: Upto 200 Degree C
• Heating Technology: Halogen
• Communication: USB Host,USB Device and RS232
• Frequency: 50/60 Hz
• Capacity: 90g
• Net Weight: 11.5 lb/5.23 kg
• Dimensions: 210 x 180 x 350mm
• Repeatability (Std Dev) (g): 0.18% (3 g sample) 0.02% (10 g sample)
• Moisture Range: 0.01% to 100% (0.01% to 1000% for regain mode
• Display Results: %moisture, %solids, %regain, time, temperature, weight, method name, drying curve and statistics

• Brand: Flexitest
• Power Supply: 220VAC+/-10% 50Hz / 120VAC+/-10% 60Hz
• Testable Gases: O2 (Standard) And CO2 (Optional)
• Test Principle: Electrochemistry And Infrared Absorption
• Test Range: 0
• Resolution: 0.1% And 0.01%
• Test Accuracy: +/-0.3% And +/-(0.03% + Displayed Value * 5%)
• Sampling Volume: 6
• Instrument Dimension: 220mm (L) X110mm(W) X70mm(H)
• Net Weight: 0.6 kg

We are offering fixed gas monitors nationwide. The efficiency of the fixed gas monitors consist clarity in digital displays that transparently depicts the necessary information as per your requirement. We are offering these fixed gas monitors in different shapes, sizes and colors. We want you to select the best place to invest. features available as common card designdurablelong time usesensitiveeasy maintenance uses detectorprovides protectiondepict able fixed single / multi gas monitoring the fixed monitoring system consists of two parts : monitoring model gazalarmsensing model gazsens model gazalarm the monitoring unit consists of power supply card : size - 220 mm x 100 mm supplies power (9 v dc to 24 v dc) to complete system including gas detector assembly (field unit) with a current carrying capacity of one card is maximum up to 5 amp. This can cater up to 10 cards in one rack. Multiple numbers of cards in multiple numbers of racks in one panel can be provided if the numbers of channels are more than ten.control card : control card provides fixed voltage & current required to the field unit. It also accepts 4-20 ma signal from field unit. This signal is then processed by control card using instrumentation amplifier. The processed signal corresponding to the gas concentration available in the field is displayed by two or three digit 7 segments led on control card display section. Two level alarms (latching/non latching type) are generated if the gas concentration is above preset limit. Fault alarm also is provided on the control card in case of sensor open/ short, cable from sensor is open/ short & under range/ over range conditions appear. The control card also delivers 4-20 ma.(repeater) output signal for plc / dcs.facility card : this card receives the alarm condition signal from control card. Depending upon the alarm conditions it activates the relays mounted on it & hoots the buzzer or siren or sends control signal to the pre-desired device. It also consists of alarm accep, reset & lamp test conditions. The push buttons are provided on the fascia plate to achieve the desired job.mother board : this board is provided on the back of 19” rack. The mother board pcb is provided with the copper tracks & euro connectors to hold all the cards like control card, power supply card & facility card. With the help of proper design reduces the back panel wiring of all cards..

maxim portable gas analyzer, online gas analyzers, ace gas leak analyzers

dissolved gas analyzer, Electrical Resistivity Testing Services

arterial blood gas analyzer, Troponin T Sensitive Rapid Test Strip