Gas Analyzers Dealers in Ghatkopar, Mumbai

• Feature: 32-Bit Contex-M3 Arm Processor 5.7" QVGA TFT Touch Screen Display

The Agasthya series BI 7100 land fill gas analyzer has been designed for monitoring recovered and processed gases from landfill and biogas sites. This equipment continuously removes moisture from the wet sample gas and comes complete with pre-filter, sample pump, flow meter, continuous moisture removal system, long-life O2 sensor, infrared CO2 & CH4 sensor, alarm relay contacts, and 4-20mA outputs for each gas measured.

• Features: ARM Processor, Fast And Accurate Readings, Handy, Light Weight, Portable, 150 Sets Of Data Storage
• Country of Origin: Made In India
• Model Name/Number: BHOOMI Flexi
• Brand: Bhoomi Analyzers
• Usage/Application: Combustion Efficiency, Flue gas measurement, Stack Emissions
• Product Type: Portbale Flue Gas Analyzer
• Power Supply: 24 VDC
• Analysis Time: T90<30sec
• Color: Grey
• Automation Grade: Semi-Automatic
• Display Type: Touchscreen Color Display
• Weight: 2 kg
• Temperature: Ambient temp. = 45 degC, Flue Gas temp. upto1600 degC
• Humidity: 96%rh
• Measurement Gas Pressure: 1 Bar
• Measuring Range: Choose upto 6 sensors from O2, CO, CO2, SO2, NOx, HC, etc
• Sample Gas Flow: 0.5LPM
• Least Count: 1ppm, 0.1%
• Flow Rate: 0.5 LPM
• Calibration Intervals: 1 year
• Output Signal: USB, MODBUS protocol
• Warm Up: 3 min
• Warranty: 1 year
• Communication Function: USB, MODBUS protocol
• Shape: Rectangular
• Sensor Life: 2 years
• Capacity: 6 sensors
• Operating Pressure: 1 bar
• Accuracy: +/-2% FS
• Battery Backup: 12hrs
• Data Logger: Inbuilt
• Degree Of Protection: IP 55
• Portable: YES
• Purge Air: Automatic purge on start up
• Consumption Of Gas: 0.5 LPM
• Included Hardware: Sampling probe with condensate trap
• Included Software: Data logging software
• Certification: traceable upto NIST Laboratories
• Testing Range: >60% of range
• Rechargable Battery: Yes
• USB Ports: Yes
• I Deal In: New Only

• Country of Origin: India
• Display: LCD display
• Drying technology: Ring halogen lamp
• Temperature range: RT to 160oC
• Interface: RS232
• Pan diameter: Φ90mm
• Power supply: 110v/220v ±10%, 50/60±1Hz
• Packing dimensions: 37*33*21.5 & 10KG (Net weight: 6KG)
• Function: Moisture, drying weight percent, ATRO drying weight, ATRO moist weight

display: lcd display drying technology: ring halogen lamp temperature range: rt to 160oc interface: rs232 pan diameter: φ90mm power supply: 110v/220v ±10%, 50/60±1hz packing dimensions: 37*33*21.5 & 10kg (net weight: 6kg) function: moisture, drying weight percent, atro drying weight, atro moist weight

• range: 0 to 10 ppm

Ammonia detection range of 0 to 10 ppm for the most direct, accurate and precise results available, Continuous online measurement ensures real-time information for optimum control of the ammonia feed without excessive operating costs, Selective and sensitive for ammonia, our system surpasses the performance of other systems that have the limitations of pH and conductivity to track real-time boiler ammonia levels, Extremely easy to use while maximizing up time � simple step-by-step scrolling instruction for setup, calibration,operation and diagnostics menus Measurements at a glance from any distance for even the lowest light conditions using the large operator friendly backlit display, Fastest and most stable measurements, limiting unnecessary calibration cycles due to drift with superior Orion ammonia electrode technology, Minimize operator time and maintenance without use of complicated moving parts or pumps that often require frequent attention and expensive spare part expenditures, Extend reagent consumption up to 2 months using our uniquely simple reagent addition design to condition the sample pH and suppress interfering ions for optimal measurement performance.

• Automatic Grade: Automatic
• Brand Name: Systea
• Measurement Mode: Continuous
• Resolution: -0 to 10 ppm-0.001 ppm, -10 to 100 ppm - 0.01 ppm, -100 to 1000 ppm - 0.1 ppm
• Accuracy: better than 5%; SD% of 7 replicates at 20% of the full scale
• Material: MS
• Range: - 0.050 to 1000 ppm NH3
• Measurement Principle: Gas-Sensing Ammonia Probe
• Protection Type: IP55
• Output Signal: 4-20mA
• Sample Temperature: 10deg C - 30deg C
• Colorimeter: Dual beam, Silicon detector
• Measuring Interval: Programmable

• Brand Name: Ohaus
• Automatic Grade: Automatic
• Display Type: Digital
• Color: White
• Accuracy: 1mg
• Output Type: RS232, USB Host, USB Device
• Model Name/Number: MB90
• Readability: 0.01%/0.001 g
• Power: 240 V AC
• Pan Size: 90mm
• Temperature Range: Upto 200 Degree C
• Heating Technology: Halogen
• Communication: USB Host,USB Device and RS232
• Frequency: 50/60 Hz
• Capacity: 90g
• Net Weight: 11.5 lb/5.23 kg
• Dimensions: 210 x 180 x 350mm
• Repeatability (Std Dev) (g): 0.18% (3 g sample) 0.02% (10 g sample)
• Moisture Range: 0.01% to 100% (0.01% to 1000% for regain mode
• Display Results: %moisture, %solids, %regain, time, temperature, weight, method name, drying curve and statistics

• Model: ADS
• Application: Industrial Use, Laboratory Use
• Brand Name: ADS

• Features: High Accuracy and continuous gapless recording , CAT IV 600V - safe enough for incoming power lines, LAN, USB and SD card interfaces.
• Accuracy: V:±0.1% , W:±0.2% rdg. ±0.1% f.s
• Frequency: 700 kHz
• Maximum overvoltage: 6000 V

Blood gas analyzer utilizes the latest optical technology. This technology does not use electrodes or contact points, eliminating the need for costly electrodes maintenance. analyzer has a measuring chamber heated to 370 Celsius. This allows for a wide operating temperature range to meet the needs of colder environments such as the operating room. Reduce pre-analytical errors with automatic sample aspiration, bubble and clot detection and step-by-step picture instruction on the colour touch screen.

• Application: Industrial
• Ambient Temperature: -10 to + 45 Deg C
• Communications: RS232 / 485
• Display Resolution: 2 Decimal places (0.01 to 99.99%)
• Frequency: 50/60 Hz
• IP Rating: IP68
• Linearity: Better than +/- 0.1% O2
• Measurement Range: Auto-ranging from 0.01 to 100% O2
• Model No: pm700
• Pressure Compensation: Automatic compensation option
• Repeatability: Better than +/- 0.02% O2
• Power: 230/115 VAC

• Brand: Flexitest
• Power Supply: 220VAC+/-10% 50Hz / 120VAC+/-10% 60Hz
• Testable Gases: O2 (Standard) And CO2 (Optional)
• Test Principle: Electrochemistry And Infrared Absorption
• Test Range: 0
• Resolution: 0.1% And 0.01%
• Test Accuracy: +/-0.3% And +/-(0.03% + Displayed Value * 5%)
• Sampling Volume: 6
• Instrument Dimension: 220mm (L) X110mm(W) X70mm(H)
• Net Weight: 0.6 kg

We are offering fixed gas monitors nationwide. The efficiency of the fixed gas monitors consist clarity in digital displays that transparently depicts the necessary information as per your requirement. We are offering these fixed gas monitors in different shapes, sizes and colors. We want you to select the best place to invest. features available as common card designdurablelong time usesensitiveeasy maintenance uses detectorprovides protectiondepict able fixed single / multi gas monitoring the fixed monitoring system consists of two parts : monitoring model gazalarmsensing model gazsens model gazalarm the monitoring unit consists of power supply card : size - 220 mm x 100 mm supplies power (9 v dc to 24 v dc) to complete system including gas detector assembly (field unit) with a current carrying capacity of one card is maximum up to 5 amp. This can cater up to 10 cards in one rack. Multiple numbers of cards in multiple numbers of racks in one panel can be provided if the numbers of channels are more than ten.control card : control card provides fixed voltage & current required to the field unit. It also accepts 4-20 ma signal from field unit. This signal is then processed by control card using instrumentation amplifier. The processed signal corresponding to the gas concentration available in the field is displayed by two or three digit 7 segments led on control card display section. Two level alarms (latching/non latching type) are generated if the gas concentration is above preset limit. Fault alarm also is provided on the control card in case of sensor open/ short, cable from sensor is open/ short & under range/ over range conditions appear. The control card also delivers 4-20 ma.(repeater) output signal for plc / dcs.facility card : this card receives the alarm condition signal from control card. Depending upon the alarm conditions it activates the relays mounted on it & hoots the buzzer or siren or sends control signal to the pre-desired device. It also consists of alarm accep, reset & lamp test conditions. The push buttons are provided on the fascia plate to achieve the desired job.mother board : this board is provided on the back of 19” rack. The mother board pcb is provided with the copper tracks & euro connectors to hold all the cards like control card, power supply card & facility card. With the help of proper design reduces the back panel wiring of all cards..

dissolved gas analyzer, Electrical Resistivity Testing Services

maxim portable gas analyzer, online gas analyzers, ace gas leak analyzers

arterial blood gas analyzer, Troponin T Sensitive Rapid Test Strip