Gas Detection Systems Dealers in Mumbai

• Brand Name: GFG
• Gas Type: Combustible Gas
• Brand Name: GFG
• Detector Features: Adjustable Sensitivity
• Display Type: Digital
• Minimum Order Quantity: 1 Unit
• Display Type: Digital

The gas detection controller GMA200continues with the tradition of the company under consideration of innovative technology and trend-setting flexibility. It is designed for commercial and industrial applications for the measurement of combustible and toxic gases as well as for the measurement of oxygen. The compact construction of the GMA200-MW4provides a cost-efficient solution for safe gas monitoring of industrial facilities.Parallel Measurement and flexible applicationUp to four analog and 16 digital transmitters can be connected to GMA200-MW4 and monitored simultaneously.Via the configuration software the measurement range, the measurement designation, the type of transmitter and the type of gas can be set individually as well as three alarm thresholds can be programmed for every connected single transmitter.The microprocessor of the GMA200-MW4 evaluates all receiving signals and activates alarm and relays. In doing so one single gas detection controller GMA200-MW4 can master different gas detection tasks.Integrated RelaysPermanent increasing demands on safety measures require complex gas detection systems and redundant protective measures to protect from gas hazards.Therefore the GMA200-MW4 has six internal relays. For the implementation of safety measures and alarm, four relays can be programmed freely so that in case of alarm the safety measures can be triggered automatically. The programming grants wide-ranged and flexible possibilities like allocation of one or more measurement point s to relay,single alarm per measurement point,configuration of collective alarm and group alarm, error report and voting function. For each, safety related error report and maintenance, one further relay is available.Graphic displayThe clear conception of the controllerGMA200-MW4 allows the rapid recognition of hazardous situations. Current measurement values are shown continuous on the LCD- graphic display.At Alarm a red back light is active.Technical dataMeasuring gases: combustible and toxic gases and vapours, for all GfG transmittersDisplay and control elements: 2,2"-LCD graphic display; 5 button keyboard (left, right, up,down, OK); 13 LEDs for Alarms, operation and Relay statusEnvironmental conditions: for storage:-25..+60°C | 0..99%r.F. (recommended 0...+30°C)for operation: -20..+55°C | 0..99%r.F.Power supply:Operating voltage: 100-240V AC 50-60Hz or/and 24V DC (20-30V DC valid)Power consumption: max.7W (without Transmitter) max.25W (with Transmitter)Fuse: F1=T 500mA (for GMA200-MW4) F2=M 1A (for Transmitter)Transmitter connection:Power supply: 24V DC ±3% with built in power supplyunit, otherwise 20-30VDC (see above) 4x 150mA respectively Itotal=0,6A atany other subdivisionRS485 outputs:TRM-Bus1+2: RS485; Half-Duplex; max. 38400 Baud (only for GMA200-MW4 relay modules)GMA-Bus: RS485; Half-Duplex; galvanically isolated; max. 230400 Baud (for GMA200-MW4 relays modules, control center, PC, SPS or Gateway)Relay Outputs:Contactors: Six Relays with one open contact eachContact current capacity:3A/250V AC or 3A/30V DCAnalog outputs: 2 x analog output4-20mA (burden max.560Ω)free allocatableAlarm acknowledgement inputs: 2 x Reset, free allocatableData logger (optional): 2GB microSD memory card with FAT (FAT16) formattingUSB terminal: Mini USB jack for configuration of the device via PCConnection cable:Cable entries: max. 9 units M16x1,5 (for cable cross section 4,5-10mm)Housing:Protection: IP65Material: PlasticsWeight: ca. 890gDimensions: 209 x 180 x 64mm (W x H x D)Approvals/Testings:Electromagnetic compability: DIN EN 50270:2006Electrical Safety: DIN EN 61010:2010 Additional Information: Item Code: GMA200 Pay Mode Terms: T/T (Bank Transfer),Other Port of Dispatch: Mumbai Packaging Details: One Sensor Per Box

• Brand Name: CSG
• Lead Time: Immediate Upto Two Week
• Model Number: COR02-GD-PGD-DT-2306-1
• Place of Origin: Maharashtra, India
• Port: Mumbai

• Brand Name: TECHNOSAVVY
• Material: Steel
• Finishing: Polished, Powder Coated
• Color: Silver, RAL7035
• Condition: New
• Power: 400-800W
• Power Source: 230 VAC
• Application: Industrial
• Feature: Durable, Hard Structure, Industry Proven Design, Less Maintenance, Rust Proof, Superior Functional
• Voltage: 18-24VDC
• Gas Type: Toxic Flammable
• Type: Gas Detection Systems
• Country of Origin: India
• Coverage Area: 8-10ft

• Type: Gas Detection Systems
• Material: Aluminium
• Color: Multi Colour
• Voltage: 0-12VDC, 12-18VDC
• Finishing: Polished
• Power: 100-200W
• Feature: Durable, Hard Structure, Less Maintenance
• Coverage Area: 2-4ft, 4-8ft

Features Microcontroller, SMD components Three Alarms AL1, AL2, AL3 5 LED states Indications Viz : Pilot, AL1, AL2, AL3, Fault 3 Digit LED Display : Resolution - 0.1% 1 Digit for Ch No. 3 relay O/Ps : AL1, AL2, Fault Built in Audio Buzzer AL1 Non Latching, AL2 & AL3 Latching Test and Reset Operation controls Compact IP65 Weatherproof Enclosure Local Sensor version - Single Unit  1 Ch Monitor Remote Sensor : Upto 500mtrs Universal Input Supply : 100-250VAC, 50-60Hz User specified range : ppm, %Vol., % LEL In-built hysteresis : no false alarms or jittering   Compact Area Monitors mG-4000 monitors are compact detection instruments that accurately measure combustible gases, toxic gases and oxygen levels. Three Alarms, in-built hysteresis, universal power input, variety of Audio-visual alarm devices, 3 digit LED display, 1 digit Ch. No. display, variable ranges  LEL, Vol., ppmall these make this Monitor a power house of gas monitoring systems. Simple and effective The unit accurately displays measured gas concentration on a large 3 digit LED display. Compact and simple design facilitates easy doit- yourself type installation. Pre-calibrated Sensors allow direct commissioning without need of skilled manpower. Monitor is equipped with onboard relays for three alarm points. It also has one sensor fault relay output. These relays can be used to drive external devices like strobes, fans, voice alarms, auto-dialers, etc.

Features:• Dual display of gas concentration & set point/ unit of the gas• Plug in smart field proven sensor• Programmable linear 4-20mA/ 20-4mA O/P with respect to gas concentration• Easy one man calibration at site• Optional RS-485 with modbus RTU protocol• Suitable in hazardous area ATEX, CCOE, CMRI & IP-65 approved. Applications:• Gas cylinder bank• Gas pipeline project• Chemical processing plant• Refineries• Chemical & petrochemical plants• Oil & gas industries• Fertilizers plants• Gas metering station• Chemical storage area

Smoke Detection Measures the number of smoke particles in the air. Photoelectric & Ionization smoke detectors are used here. Heat detection Measures the rise of temperature within a given interval and the maximum temperature. This group includes rate-of-rise temperature detectors and fixed-temperature heat detectors. Flame / Spark detection Measures the radiation stemming from the fire (infrared, visible, ultraviolet). Infrared and ultraviolet flame detectors are mainly used in this instance.

Flame and Gas Detection systems with/without SIL certified controlling & PLC conforming IEC 61508. These systems are also supplied wireless communication using HART/ ISA 100/ GSM wireless. SIL 2 certified Hybrid Sensors SIL 3 certified Controllers Point IR Gas Detectorss Open Path IR Gas Detectors Catalytic Detectors Electrochemical Detectors Metal Oxide Semiconductor Detectors Flame Detectors Photo Acoustic Detectors Ultrasonic Gas Leak Detectors

Dual display of gas concentration & set point unit of the gas,Plug in smart field proven sensor,Programmable linear 4-20mA 20-4mA OP with respect to gas concentration,Easy one man calibration at site,Optional RS-485 with modbus RTU protocol,Suitable in hazardous area ATEX, CCOE, CMRI & IP-65 approved.

• Color: Red,Orange,All Color
• Material: Aluminium,Metal, Iron
• Finishing: Polished
• Condition: New,Old
• Weight: 0.-2.5 Kg.2.5-5 Kg
• Product Type: Gas Detection Systems
• Packaging Type: Plastic Bag

Features: * Dual display of gas concentration & set point unit of the gas * Plug in smart field proven sensor * Programmable linear 4-20mA 20-4mA OP with respect to gas concentration * Easy one man calibration at site * Optional RS-485 with modbus RTU protocol * Suitable in hazardous area ATEX, CCOE, CMRI & IP-65 approved.

marine gas detection system, CCTV Camera, temperature calibrators

gas detection system, gaZguard Portable Gas Monitor, oxygen sensors

gas detection system, fire control system, Fire Detection System

gas detection systems, Portable Gas Detector, Gas Leak Detector

gas detection systems, personal protection equipments

gas detection systems, chemical analyzers, Electrical Control Panels

gas detection system, Fire Protection Systems, Fire Alarm Systems

gas leak detection system, Gas Filter, Gas Flow Meter, Gas Regulator

gas detection systems, Transducer Protector, Conductivity Sensor