Gas Generator Dealers in Mumbai

• Type: Nitrogen Gas Generator
• Weight: 5000-6000kg
• Color: Blue
• Voltage: 440V
• Condition: New
• Capacity: 1 -1000NM/hr
• Automatic Grade: Fully Automatic
• Power: 1 - 300kw
• Driven Type: Electric
• Warranty: 1year
• Country of Origin: India
• Brand Name: United
• Application: industrial
• After-Sales Service Provided: yes

Airotherm is a combination of shell-in-shell and tube-in-shell type hot air generator. It has four concentric shells. The furnace shell has a blind end where the flue gases are reversed over the flame itself forming the 1st and 2nd pass. The 3rd pass is situated between the 2nd &3rd shell from where the flue gases, led via a duct, to the tube-in-shell type heat exchanger. The 4th & 5th pass are through tubes of the tube-in-shell heat exchanger. The burner assembly is bolted on a removable inner cover plate. The combustion air is led to an air register which is formed by the annular space of the inner cover and the outer cover. The air going for combustion is thus preheated. The fresh air has four passes to absorb heat from the flue gases. The 1st pass of the cold air enters around the 5th pass of the flue gases. Likewise all the subsequent passes of the air and flue are in counter current mode enabling maximum heat transfer. The final 4th pass of the fresh air which is at the last leg of the heat transfer path wraps around the furnace in circular path absorbing the heat attaining the required temperature for the process. The max temp for this model of heater is 300 The design of the heater is made simple and operator friendly.

We form a combination of Chemical Engineers in the field of Process engineering and itsapplication in the glass equipments/process packages.DESIGN AND SUPPLY OF VARIOUS UNITS as per client`s requirement are as under: 1. Absorption systems for gases such as HCl, Cl2, SO2, HBr. NH3, Br2, NOx etc. 2. Anhydrous HCl Gas Generation Unit by different routes viz. - Sulphuric Acid Route - Boiling Route - Calcium Chloride Route - Cyclic Route 3. HBr Gas Generator (By Boiling Route) 4. Sulphuric Acid Dilution Units. 5. Hypochlorite Manufacturing Units 6. MCA Condensation Assembly 7. Distillation - Conversion of Batch Process to Continuous Process. 8. Solvent Recovery 9. Iodine Recovery 10. Raw DCB Plant. KNOW-HOW WITH PLANT for the following products : 1. Bromine recovery from industrial waste / salt bittern 2. Nitric Acid Concentration. 3. Sodium Hypochlorite

• Condition: New
• Application: Industrial
• Efficiency: 74 ± 2% on NCV
• Temperature: Up to 320° C

Gas fired hot air generator Capacity: 1 Lkcal to 100 Lkcal Thermic Fluid Heater with Heat Exchanger.Fuel: Agro waste Wood Briquette Coal, Temperature:Temperature: Up to 320° C.

• Application: Industrial / Medical
• Brand Name: SANGHI - ORG
• Operating Pressure: 7 Kg/cm2
• Flow Rate(LPM)/(Nm3/hr): 140 LPM / 8.4 Nm3/Hr
• Technology Used: PSA (Pressure Swing Adsorption)
• Purity Of Oxygen: 93+-3%
• Material: Mild Steel
• Type of Compressor: Screw Air Compressor
• Automation Grade: Semi-Automatic
•  :  
•  :  

The HMXT design has been refined from the proven TITANTM HM and HS generators with new features to provide added benefit to our customes.   A distributed I/O system using DeviceNet Network provides flexibility, additional operatinal data, and reducres installation time. A modernized human machine interface (HMI) permits easy operator access, data histrory, and remote operation.   An efficient layout helps to reduce scheduled preventive maintenance time by 30% in additon, the gas delivery pressure has been increased to 10 bar.     FEATURES     • Ultrapure Pressurized Gas • Simplified Installation • High Quality Standards • Metals Processing • Power Generator Cooling • On Demand Gas Delivery               APPLICATION     • Semiconductor Fabrication • Electranics Fabrication • Argon Purification • Proven Reliability • Safe, Automatic Opration • Fuel Cell Testing           NOTE : The power supply is a separate enclosure which can be isolated from the generator.   The power supply footprintcan vary, but is approximately 101.6 cm (40 in) x 91.4 cm (36 in).

MIDIGAS nitrogen gas generators from Parker domnick hunter produce nitrogen gas from compressed air and offer a cost-effective, reliable and safe alternative to traditional nitrogen gas supplies such as cylinder or liquid. Nitrogen is used as a clean, dry, inert gas primarily for removing oxygen from products and/or processes. MIDIGAS provides an on-demand, continuous source of nitrogen gas which can be used in a wide range of industries such as food, beverage, Pharmaceutical Laboratory, chemical, heat treatment, electronics, transportation, oil and gas and laser cutting.

• Power: 198-242V (AC); 50Hz,1 Phase
• Weight: 12 kg (approx)
• Min/max Temperature: 5-40°C
• Max. Ambient Humidity: <85% RH
• Dimensions: 420 x 210 x 350mm (LxWxH)

Hydrogen is produced in the PGH Series Hydrogen Generators by the most advanced electrolytic membrane technology. The application of voltage across the electrolyte results in hydrolysis, breaking down the water molecule into hydrogen and oxygen gas, which are separated by the gas permeable membrane. Once separated, the hydrogen gas goes through a series of purification and moisture removal systems to achieve the desired level of purity while the oxygen gas is being discharged into the atmosphere. Electrolytic membrane technology has its advantages over alternative hydrogen generating techniques as it is clean, requires less maintenance and there is no need to store chemicals to maintain operation. Only pure double distilled water (initially some KOH), is required to provide trouble free long term operation. Membrane separation is also less time consuming as only water is needed for routine maintenance.

HAG SERIES Oil LPGNatural gas fired – 50,000 to 60,00,000 Kcalhr UNITHERM'S LPG/NATURAL GAS fired air heating system is designed specifically with large Industrial drying in mind. It's superior design, efficient performance and high fuel economy makes it a better buy than any other heater of its kind to achieve much lower drying costs than standard conventional ovens. The unit is easy to install, simple to maintain and highly economical to operate. The design is suitable for a maximum temperature of clean hot air at 300 dEG C IN INDIRECT Fired Design & 800 Deg C in Direct fired Units

Hydrogen Gas Generator For GC And Other Application Salient Features : • Hydrogen Generator for GC & other applications • Purity 99.999% at 4 kg cm2 • Method of Hydrogen production by Electrolysis • Automatic with Digital Flow Display • In-built Safety Parameters for Pressure & Leakage • Hydrogen Generator of Higher Flow are also available • Hydrogen Generator PEMSPE also available

• Flow Rate: 3- 200 NM³ / hr

We are manufacturer of the compact Endo gas generator which is based on single catalytic cracking of LPG or natural gas with very small amount of air at such a rate that the product gas after cracking contains only CO, H2, N2 and traces of CO2 and moisture Such generator are very useful in the heat treatment of the carbon steels. Our NE-EXG model of generator is like the same as the NE-EDG MODEL except the more perfect combustion which produces the gas rich in H2 and CO. These generators are generally used in the metal industry.

• Application: Industrial
• Automation Grade: Fully-Automatic
• Flow Rate(LPM)/(Nm3/hr): 5000LPM / 300 Nm3/Hr
• Technology Used: PSA (Pressure Swing Adsorption)
• Purity Of Oxygen: 93+-3%
• Outlet Pressure: 4 Bar (g)
• Design: Customized
• Installation Time: 25-30 Days

We are offering nitrogen gas generator. I-chess is a company established in 2006, headquartered in mumbai, india and led by a german national. Our knowledge is based on two decades of hands-on experience in various fields of the international and indian chemical industry. Through its various offices and global network, i-chess is very familiar with the needs and requirements of american, european and asian companies. We take pride to add to our existing services and now offer our customers tailor-made and intelligent solutions in the field of nitrogen generating plants with respect to increasing value and reducing costs. we believe i-chess is well placed to capitalize on the global industry’s move away from traditional markets towards asia and especially india. Thanks to our core strengths in innovative research & development and cost effective production, we are convinced to add value to your business. i-chess is a manufacturer of higher value added chemical intermediates that find application in various fields, right from api’s to agrochemicals, polymers, anti-oxidants, food-additives and performance chemicals. our experience, efficiency & expertise in understanding technologies and bringing them to live is also due to the fact that we do not mind being pioneers in certain fields. We started from scratch to achieve the recognition of many client and are still hungry. Our products can provide you with solid, reliable economic alternatives just as it has opened new avenues for others.

• Automatic Grade: Automatic
• General Temperature Requirement: -5C - 40C
• Engine Oil Capacity: 0.55 L
• Rated Power: 3.5 KW
• Output Type: AC Single Phase
• Generator Type: Single Phase Brush Motor

• Capacity Range: 600 Kg/hr – 10 Ton/hr

These Steam Boilers are available as Once through type, Shell type, Smoke Tube Water Tube Boilers. We offer Super Efficient Steam Boilers both IBR asIBR Boiler well SIB with numerous advantages in the Industrial world. three pass double helical design : allows preheated feed water to flow downwards through the finned economiser banks & passes to the radiant steaming zone. large furnace with low position : enables low heat release rate, rapid water circulation. submerged combustion chamber : results in excellent internal water circulation. separate tube sheet : eliminates stresses, prevents ligament cracks.

Hydrogen is produced in the PGH Series Hydrogen Generators by the most advanced electrolytic membrane technology. The application of voltage across the electrolyte results in hydrolysis, breaking down the water molecule into hydrogen and oxygen gas, which are separated by the gas permeable membrane. Once separated, the hydrogen gas goes through a series of purification and moisture removal systems to achieve the desired level of purity while the oxygen gas is being discharged into the atmosphere. Electrolytic membrane technology has its advantages over alternative hydrogen generating techniques as it is clean, requires less maintenance and there is no need to store chemicals to maintain operation. Only pure double distilled water (initially some KOH), is required to provide trouble free long term operation. Membrane separation is also less time consuming as only water is needed for routine maintenance.

• Generator ranges: 75 kVA to 625 kVA

Environment friendly, Low noise level, Greater load bearing capacity, Proven reliability and durability, Nation-wide service network, Unmatched warranty: 2 years5000 hours, Single window after-sale support round the clock

Fully automatic. 2) Easy operation & fail proof system. 3) Packaged models. 4) Compact in design. 5) Caters to hot air requirements of any drier. 6) Record efficiency. 7) Economically cheapest clean hot air available instantly. 8) Low motive power required. 9) Replaces electricity, Steam, thermic fluid , media to generate hot air. 10) Drying Time & drying cost considerably reduced. NEOTECH's oil fired hot air generator model technology blocks comprise of an advanced shell in shell type radiant heat transfer section connected to a multiple pass shell & tube type convective hea exchanger.