Gas Leak Detector Dealers in Sakinaka, Mumbai

• Model Number: EZ-Sense -1 with Indication, EZ-Sense - B Non Indicative
• Resolution: lPPMorl%LEL
• Response Time: 2-3 seconds
• Warranty: One year
• Battery: High Impact Plastic. (ABS)
• Temperature: -10°C to 50°C
• Weight: 200 GM
• Dimension: 119(H) X80(L)X 25(D)
• Gas Detected: LNG, LPG, CH4 Flammable gas, H2
• Leak Strength Indication: 1 - DIGITAL B - Three Level Visual Alarms
• Calibration: PPMorLEL% (To Customers specs)
• Sensor: Solid state semiconductor
• Housing: High Impact ABS Plastic
• Alarm indication: Alarm indication
• Calibration: Not required
• Gooseneck: 6 volt alkaline, Rechargeable batteries 1.5V (AA Alkaline)
• Warm-uptime: About 10 sec
• Battery Operating Time: About 4 hours
• Humidity: 15 to 95% RH

Our organization is a one-stop stop and the best destination for acquiring superiority guaranteed Smoke Detector Camera. We have hired expert warehousing personnel who keep a stringent check on the entire range of stored lot ensuring zero damage to the products till the final dispatch to the clients.

Inline Tunnel Metal Detector Tunnel metal detectors can be integrated with conveyor systems to provide inline metal detection solutions, capable of detecting and rejecting all types of metal, preventing contaminated products from reaching end consumers.

The company is a highly acclaimed Supplier of Metal Detectors. The Metal Detectors, offered by the company, can be availed in a wide range that includes Door Metal Detectors, Black Hawk Metal Detectors, Hand Held Metal Detectors, Phantom Metal Detectors, Baggage Metal Detectors, Stealth Metal Detectors and Bag Metal Detectors. The company offers the Best Metal Detectors at the best prices on a timely basis.

Technical Specifications: Dimension - Archway Assembly - 2230 x 850 x 600 Passage clearance - 2020 x 720 x 600 Power supply - 230v AC 50hz Power consumption - less than 35w Indication - Visual Indication on both side panels and Control Head Weight - 60kg Approx Display - Big LCD for counter Display and parameter settings and Display Human Bar Graph - Pin point Locator on Control Head Assembly

Flame and Gas Detection systems with/without SIL certified controlling & PLC conforming IEC 61508. These systems are also supplied wireless communication using HART/ ISA 100/ GSM wireless. SIL 2 certified Hybrid Sensors SIL 3 certified Controllers Point IR Gas Detectorss Open Path IR Gas Detectors Catalytic Detectors Electrochemical Detectors Metal Oxide Semiconductor Detectors Flame Detectors Photo Acoustic Detectors Ultrasonic Gas Leak Detectors

• Alarm Mode: Vibration, Sound
• Range: 4 -6 feet

Flame and Gas Detection systems withwithout SIL certified controlling & PLC conforming IEC 61508.These systems are also supplied wireless communication using HART ISA 100 GSM wireless.Metal Oxide Semiconductor Detectors.

We offer Temperature and smoke detector - fire control. the fire control pro is a state-of-the-art smoke detector neatly integrated in the control pro family from steinel professional. As a dual sensor, the fire control pro uses two detection methods for twice the safety: smoke and temperature detection. Smoke is detected in a specially designed smoke chamber, temperature by a thermo-differential sensor. it provides the capability of reliably detecting different types of fi re, such as burning liquids or smouldering fi res. This also makes the system less receptive to kitchen and bathroom vapours, dust or electrical interference pulses. The fire control pro benefi ts from processor-controlled signal evaluation and drift compensation, preventing any triggering of false alarms to the greatest possible extent. # 2 detection sensor variables: smoke and temperature (optical/thermal) # light sensor for low-battery warning during the day (loud acoustic warning signal) # 24 h auto-calibration # microprocessor-controlled signal evaluation # symmetrical-flow smoke chamber # temperature-drift correction # cyclical self-test function # also suitable for kitchens and bathrooms # design co-ordinated with presence detector for a neat ceiling look smoke detection can be deactivated for 15 minutes by function button (e.g. In the event a large controlled quantity of smoke coming from a saucepan); with temperature detection remaining active. To begin with, a light sensor only allows the acoustic low-battery warning to sound during the day. Only when battery capacity becomes critical is a warning also given at night. In addition to the 9-v battery (lithium or metal hydride), the fire control pro smoke detector also comes with a 230-v connection and a communication port for interconnecting detectors. Needless to say, the steinel fire control is vds-tested and has a self-test feature. mounting : - ceiling mount. battery : - -v mh block battery, or 9-v long-life lithium block battery. battery failure signal : - 30 s cycle, 30 days. acoustic alarm : - 85 db (a) maximum detection zone : - 80 m2 relay contact : - 1 a 250 v response time (t90) : - 5 min supply : - 230v ac ip rating : - ip 40. http://www.pir-motion-sensor.com/fire-smoke-detector.php

Detects ferrous and non ferrous Metals. Detects ferrous and non-ferrous metal concealed in carbon. Continuous Measurement. LCD Bar graph Facility to display the volume of the metal carried through the detector. Metal Volume displayed on the Bar-graph (16 levels) User programmable sensitivity levels up to 8 levels. Self balancing against any change in ambient temperature, humidity, proximity of metal around. Highly reliable.(Very Low MTBF) WALK and STOP display to regulate the traffic flow. Instant recovery on detection. In-built IR sensors (Infrared sensors) to avoid false metal detection. 6 Digit IN/OUT and NET Count Display on LCD. Metal Detection Threshold Setting through Key Pad. Programmable Audio tones as per Metal level. Password protected KEY-PAD. PC connectivity through RS-232 Serial port(OPTIONAL)

• Type: Metal Detector Gate
• Material: Ply or ABS
• Shape: Rectangular
• Style: Common
• Color: Blue, Brown
• Feature: Anti Corrosive, Anti Dust, Anti Zunk, High Quality
• Finishing: Polished
• Width: 2-4ft
• Frame: Single Frame
• Height: 7ft
• Opening Type: Open
• Automation Grade: Automatic
• Size: 7 feet
• Brand Name: SMB
• Application: Metal Detector Door

Hdpe Granules, Plastic Raw Material, Plastic Raw Materials

Microprocessor control Advanced digital signal processing Tricolor visual LED display and audible signal for progressive leak size indication Seven levels of sensitivity Tactile keypad controls Real-time SF6 sensitivity adjustment Battery test function Battery voltage indication True mechanical pumping provides positive airflow through sensing tip Mute feature included Cordless and portable Comfortable one hand operation One year warranty

Tablet Metal Detector, meeting the pharmaceutical industry’s requirements for sensitivity, stability and sanitation. This Pharma Metal Detector is designed for the detection and removal of minute pieces of ferrous, nonferrous and stainless steel contaminations. Such particles sometimes enter the product stream from deteriorating processing equipment components such as worn sieve wires or splintered dies. Its compact design accommodates many space-restricted areas within tablet and encapsulation rooms. Metal Detector provides 100% in-line inspection of tablets and capsules at the outlet of the press and screens for ferrous, non-ferrous and stainless steel contaminants. It has many features to enhance quality control measurements without interfering with smooth high-speed tablet manufacturing. This also allows easy integration with dedusters and collection drums. The construction of this special Stand saves space into the production room and reduces the retention areas. Cross contamination from production changes is prevented by its clean design and easily removable throughput chute, reject gate and cover. The scanning capacity is 10,000 tablets per minute and the metal detection head is fully adjustable for the height and  angle to ensure the best possible speed and detection accuracy. The Metal Detector chute cab be quickly and easily dismantled for routing cleaning and product changeover. Conforms to the hygiene requirements of the pharmaceutical industry this system can be combined with all high performance Tablet compression machine and dedusting systems. Flexible operating height, angle and frame with lockable casters allow for easy integration to any production facility. The complete unit takes up minimum system length. Features: Automatic Balance Principle  Ferrous / Non-Ferrous Detection & Rejection. Reject Confirmation and Indication For Irregularities. Toughness to Vibration And Noise. Digital Signal Processor. Rugged Mechanical Construction. Automatic Parameter Retention. Improved and Compact Search Coil. Date and Time Recording for Routing QC Checks. Timer with Adjustable Delay and Duration for Reject Device Control. All Sensitivity Checks, Settings and Routine QC Checks are recorded. Stable Operation on Mineralized or Conductive Products. LED bar Graph to Display the Status of Coil.