Gas Meter Dealers in Mumbai

LPG LOT System is advance concept in Multi-cylinder Installation which offers Strength of Bulk LPG Installation and easy functionality. LPG LOT System can cater to volumes up to 250 Kg per hour Installation which overcomes lots of problems and demerits of bulk LPG Installation & conventional Manifold (VOT) system. LPG LOT System withdraws Liquid LPG up to 10 Kg/Hr.     LOT system is an advance concept in multi cylinder installations which overcomes lots of demerits of Bulk LPG system & conventional Manifold (VOT) systems. This system is widely used in commercial & industrial applications only where high pressure is required & not for domestic purpose.     LOT system withdraws liquid LPG using LOT valves & is converted into vapor using a vaporizer. LPG off take per cylinder can go up to 10kg/hr which is comparatively much more than the normal Vapor off take cylinder of 0.6 kg/hr. The system offers the efficiency of Bulk installation and easy functionality of cylinder manifold system. LOT systems are compact, safe & highly cost effective as liquid is completely drawn from the cylinder and there is no residual loss.

• Material: Stainless steel float
• Accuracy: +/- 10% Of Scale Value Or 0.2 Lpm (whichever Is Higher)
• Model No: NSS-GPR-18
• Product Category: Industrial Regulators
• Tolerance: As per AFBMA Grade24)
• Operating Pressure: 60 Psig

The production of biogas is a key part of any operation in most of industrial, commercial and public sector. It is necessary to measure the flow of biogas to ensure facility efficiency using bio gas flow meter. Flow measurement helps operators to know how much biogas deliveries to the gas grid. Measuring technologies associated with biogas applications are challenging. Various technologies are available, including thermal mass, turbine, vortex, orifice, annubars and ultrasonic. Biogas is a dirty gas containing moisture and particulate content. It can clog up flow measuring instruments such as annubars, orifice plates and gum up rotor of turbine meters and similar instruments that have moving parts. Biogas often has a low pressure which makes differential pressure flow measuring device unsuitable since they require large differential pressure to operate. PCD is one of the leading biogas flow meter manufacture in India. Thermal mass flow technology measures the mass flow of gas, have any moving part results in negligible pressure drop. Thus, this flow technology is best suits for low-pressure flow measurement. It is one of the best suitable flow measuring devices which operate over a wide flow range having wide turn downs ratio.

• Packaging Type: Box
• Weight: 267g
• Bore Size: 1"
• Accuracy Class: 4%
• Working Pressure: Less Than or Equal 0.6Mpa
• Body Material: Brass

• Brand Name: Smooth Flowmeters
• Display: Local
• Line Size: Up To 4 Inch
• Application: Clinical, Hospital, Veterinary Purpose, Industrial 
• Model: Ultramag
• Flow range(Min-Max): 0.5 to 400 M3/Hr

CVG-MG4000 Mass Flow Meters are designed for applications where manifold flow measurements. The standard flow channels are 3 mm and 8 mm in diameter, respectively. Plastic finishing with an easy change of the mechanical adaptors enables applications at a low cost and different environments.Designed for low gas flow in fixed flow channel of 3 mm and 8 mm, with accumulated flow register,Excellent for manifold process gas monitor and control.

• Type: Measuring Instruments
• Port: nhava sheva
• Brand Name: Raychem RPG Pvt. Ltd.
• Place of Origin: Maharashtra, India

• Material: Aluminum
• Working Temperature: -20 - 45 degree
• Relative Humidity: 95%
• Material Of Case: Aluminium Alloy
• Screw Thread: 21 x 1.5mm

Wet gas meter for High Flow and Pressure Requirement (Turbine Meters & RPD Meters). Moreover, we continuously strive to improve our product offering and increase customer satisfaction levels through technological developments and unmatched after-sales support.

Flow Range : DFM-01 : 1 ml/min. to 50 ml/min. with least count of 0.1 ml/minDFM-02 : 5 ml/min. to 500 ml/min. with least count of 1 ml/minDFM-03 : 200 ml/min. to 2000 ml/min. with least count of 1 ml/minDFM-04 : 1 ml/min. to 500 ml/min. with least count of 0.1 ml/min (auto range)DFM-05 : 1 ml/min. to 1000 ml/min. with least count of 0.1 ml/min (auto range)DFM-06 : 10 ml/min. to 400 ml/min. with least count of 1 ml/min. (auto range)DFM-07 : 0.5 mL/min to 750 mL/min, auto-rangingDFM-08 : Flow for gases across a range of 5-500 mL/min

• Accuracy: Upto 0.2%
• Material: Plastic Body
• Operating Pressure: 25 Bar
• Application Media: Gas
• Display Type: Digital
• Flow Range: 0L/min (DN 6mm)
• Size: 200L/Min

Pre-paid gas meter is a gas meter with additional Electronic Control Unit(ECU) ON traditional diaphragm type gas meter, realizing digital and intelligent management of gas measurement. It adopts high quality diaphragm gas meter as its base meter which is manufactured in compliance with IS 14439-1 & 11 BS EN 1359:1999 Standards. The key components of the mater are made of intensified special material with world’s advance production level and test lab equipments. Mechanical meters have reformed the traditional supply of gas, generation of bills for gas consumed and collection of payment against gas supplied. Prepaid gas meters with modernization, safety, reliability performances and modern management characteristics ensure the benefits of supply and demand are not violated and revenues are intact. Hand Held Device for Prepaid Meters A portable hand held device for prepaid meters is available which can perform functions like “create new customers”, “recharge customer card”, “reverse the charge”, “check tampers” and is attached with a printer used for printing transaction records for the consumer. The printing module is a thermal printer and has the facility to automatic feed and cut printed paper. The printer is connected with microcontroller through USART serial communication protocol to store customer records. It can store at a time data upto 500 customers.

This micro controller based intellegent Detector is highly sensitive to VOC and solvent vapor. The LCD displays the level of gas or the vapors present. An audible alarm alerts you of dangerous levels with response in seconds. On start-up, it goes through self integrity check before getting into measurement mode. Complete Automatic Operation Self Diagnostic Check Backlit Alphanumeric Display Diffusion or Suction Sampling Audio & Visual Battery Alarms Simultaneous Display of Gas Name And Concentration Intrinsically Safe

• Material: Metal
• Application: Hospital
• Tube: Polycarbon
• Accuracy: 100%
• Capacity: 0-15 ltr/min

We are offering argon gas flow meter, acrylic panel gas rotameter flow meter for argon. Rushila make high accuracy, clear acrylic plastic body low flow acrylic flowmeter uses tapered tube drilled directly in acrylic plastic body itself, acrylic plastic is highly stabled and chemical resistant and gives glass like clearness which enables clear visualization of flow. In acrylic body rotameter, flow range is calibrated, engraved and coloured with black on body itself for long lasting durability. Acrylic body low flowmeter are generally used for purging and used for chlorination of gases

Gas Meter, Woltman Type Bulk Water Meters, Horizontal Woltman Water meter

Digital Gas Flow Meter is based on the classical method viz. soap film method. The instrument is automated by using Microcontroller which provides highly accurate measurement and direct digital read out of gas flow rate. The time required for the soap film to pass through a fixed known volume is measured.

Gas Meters, Gas Burners, Gas Regulators, Storage Tanks, Gas Flow Meters

Technical Specifications : * Flow Range : DFM-01 : 1 mlmin. to 50 mlmin. with least count of 0.1 mlmin DFM-02 : 5 mlmin. to 500 mlmin. with least count of 1 mlmin DFM-03 : 200 mlmin. to 2000 mlmin. with least count of 1 mlmin DFM-04 : 1 mlmin. to 500 mlmin. with least count of 0.1 mlmin (auto range) DFM-05 : 1 mlmin. to 1000 mlmin. with least count of 0.1 mlmin (auto range) DFM-06 : 10 mlmin. to 400 mlmin. with least count of 1 mlmin (auto range) * Accuracy : ±2% of Reading, ±1 Digit * Power Supply : 230 V AC, 50 Hz, 10W * Resolution : 0.1 mlmin. & 1 mlmin * Dimensions : DFM- 01 : 27 cm (H) x 13 cm (W) x 10 cm (D) DFM- 02 : 27 cm (H) x 13 cm (W) x 10 cm (D)