Gas Pipe Fittings Dealers in Grant Road, Mumbai

• Country of Origin: India
• Type: FITTING
• Material: STAINLESS STEEL
• Application: Pipe Industry
• Color: White
• Grade: 304,316,303,202,410,420,310,309

• Size: 1/2 inch
• Material: Alloy Steel, Carbon Steel, Stainless Steel (SS),

We hold an extensive stock of stainless steel fittings according to ASME, ISO and DIN.   Butt weld fittings, ANSI/ASME / ISO/DIN Socket weld fittings, ANSI/ASME Threaded fittings, ANSI/ASME/ ISO Outlets, ASME Coupling L       Buttweld Fittings available in below form: 90° Long Radius Elbow 90° Short Radius Elbow 45° Long Radius Elbow 45° Short Radius Elbow 180° Long Radius Elbow 180° Short Radius Elbow 1D Elbow 1.5D Elbow 3D Elbow 5D Elbow Seamless Buttwelding 45° and 90° Elbows Welded Elbows Seamless Buttwelding 180° Returns Straight Tees and Crosses Reducing Outlet Tees and Reducing Outlet Crosses Equal Tee Reducing Tee Equal Cross Reducing Cross Reducers Concentric Reducer Eccentric Reducer Stub End Lap Joint Stub Ends Long Stubend Short Stubend Pipe Cap End Cap Collar Swedge Nipple Pipe Nipples Barrel Nipple Reducing Nipple Bend Long Radius Bend Piggable Bend Lateral   TEST CERTIFICATE Manufacturer Test Certificate as per EN 10204 / 3.1B Stainless Steel Butt Weld Fittings We offer wide gamut of stainless steel butt weld fittings that are widely used in diverse industries. Our gamut of products conform various standards such as the varied grades of stainless steel butt weld fittings that we supply are. Standard: ASTM / ASME A/SA 403 GR WP "S" / "W" / " WX" Grade: 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L   Sachiya Steel International holds a large stock of stainless, forged, socket welding fittings in F304/304L and F316/316L (dual marked and certified). Sachiya Steel International's socket welding fittings are according to ASTM A182, ASME B16.11. Socket weld unions are according to MSS SP-83. Sachiya Steel International's ASME 3000 lbs forged, socket weld fittings are white pickled with hardness according to NACE MR0175, IC according to ASTM A262E and PMI tested. Sachiya Steel International socket weld fittings are certified according to EN 10204/3.1. Types of socket welding fittings     Caps   Couplings   Couplings, half   Elbows, 90°   Elbows, 45°   Tees   Unions   Sachiya Steel International holds a large stock of stainless forged, threaded fittings in F304/304L and F316/316L (dual marked). The forged, threaded fittings are according to ASTM A182, ASME B16.11. Unions are according to MSS SP-83. Sachiya Steel International's ASME 3000 lbs, threaded fittings are white pickled with hardness according to NACE MR0175, IC according to ASTM A262E and PMI tested.   Sachiya Steel International's forged, threaded fittings are certified according to EN 10204/3.1.   Threads   The threaded fittings are supplied with NPT threads (type C), standardized under ANSI/ASME B120-1. The internal and external threads are tapered.   Types of thread fitting     Bushings, hexagon   Caps   Couplings   Elbows   Hexagon head males   Nipples, hexagon   Tees   Unions

• Thickness: Above 1/4
• Finishing: Polished, Non Polished
• Dimension: As Per Standard Catalog
• Outer Diameter: As Per Catalog
• Inner Diameter: As Per Catalog
• Usage: Manufacturing Plants, Industrial Use, Automobile Industry, Marine Applications, Water Treatment Plant
• Specialities: High Quality
• Type: Perforated Stainless Steel Tube
• Material: Stainless Steel
• Shape: Hex Body
• Certification: ISO 9001:2008
• Color: Silver
• Pressure: High Pressure
• Standard: ASTM
• Country of Origin: India
• Steel Grade: All Steel Grade
• Corrosion Resistance: Yes
• Fluid Type: Chemical
• Usage: silver
• Size: Above ¼ Inch
• Name: ferrule fittings

Being a quality-conscious firm, we consider all the stated quality norms for ensuring that optimum quality products reach the buyers. Over the years, our company has formed alliances with various leading logistics services providers. Therefore, we can make timely delivery of consignments.

• Material: Brass
• Size: 1/4 inch-1 inch
• Color: YELLOW
• Bend: DEGREE
• Capacity: AS REQUIRED
• Item Code: AMTB24

We are supplier & manufacturer of a wide range of products which include butt-weld fittings such as stainless & duplex steel buttweld fittings and nickel & copper alloy buttweld fittings. we offer a wide range of stainless steel elbows that are available in different sizes. grades: astm a182 f304, 304l, 304h, 316, 316l, 317, 317l, 321, 310, 347, 904l, etc. size: 1/8" nb to 4" nb. (socketweld & threaded) sch : sch 5, sch10, sch20, sch40, sch80. class: 150#, 300#, 600#, 900#, 1500#, 2000#, 3000#, 6000#, 9000#

We are actively engaged in offering superior quality Pipe Fittings to all the buyers from all round the nation. We make use of top grade metal that is made using superior quality metal that is resistant to corrosion, rust and abrasion. We have the ability to deliver even the bulk orders of the Fittings. As far as the cost is concerned they are offered by us at the most reasonable prices! 

• Brand Name: T.c fitting
• Material: Stainless Steel
• Finishing: Polished
• Feature: High Strength
• Type: Pipe Fittings
• Country of Origin: India
• Head Code: 400004

• Brand Name: Indian
• Color: Silver
• Warranty: 2 year

We, Mahadev Steel India (ISO 9001:2015 CERTIFICATE COMPANY ) from 2001 are one of the famous manufacturers, exporters, wholesalers, and suppliers of an extensive array of Stainless Steel Ferrule Fittings, Carbon Steel Ferrule Fittings, Duplex Steel Ferrule Fittings, High Nickel Alloy Ferrule Fittings. These products are available at the most reasonable price range. We supply wide range of high quality Stainless Steel Ferrule Fittings. Steel Ferrule Fittings are used in various industrial applications. Various range of pipes available as per customers demand. Due to their efficiency, high performance, rigid design, easy operations and shock proof nature, our offered range is widely demanded amongst clients. These products are manufactured by our authentic vendors making use of ultra-modern machinery, advanced technology and high-quality raw material.   Steel Ferrule Fittings & Dairy Fittings Specification   Size : 1/16"OD to 2"OD,OD to 50mm OD Thread : Thread NPT, BSP, BSPT, UNF, ISO, SAE, etc. Finish : Mechanical Polish as well as Electropolish finishes. Connection : Male, Female, Welded Pressure Rating : 6000PSI for Stainless Steel,300/1000/3000PSI for Brass Category : Instrumentation Tube Fittings, Compression Tube Fittings, Ferrule Fittings, Tube Fittings Type : Nipples, Adaptors, Crosses, Union Ball Joints, Reducing Bushing, Reducers, Pipe Caps, Couplings, Pipe Plug, Hollow Hex Plug, Elbow, Reducing Union, 90 Deg. Union Elbow, Reducing 90 Deg. Union Elbow Etc. Extender Leg 90 Deg. Union Elbow, 45 Deg. Union Elbow, Union Tee, Female Connector, Male Connector, Manifold Tee, Locator Union, Extended Run Leg Union Tee, Reducing Tee, Tribow, ATW Weld Ring, Tube Socket weld To Pipe Butt Weld, Tube Butt Weld To Tube Socket Weld, Port Connector Etc. Also as perthe National & International Standard.   Ferrule Fittings & Dairy Fittings Material & Grade   Stainless Steel Ferrule Fittings : ASTM A-269, A-268, A-213, A-789, 304, 304L, 310, 316, 316L, 316Ti, 317, 317L, 321, 321H, 347, 347H, 410, 416, 420, 430, 431, 904L Duplex & Super Duplex Steel Ferrule Fittings : UNS NO S31803, S32205. UNS S32750, UNS S32950 Nickel Alloy Ferrule Fittings : Nickel 200, Nickel 201, Monel 400, Monel K500, Hastelloy C22, Hastelloy C276, Hastelloy C2000, Hastelloy B, Inconel 600, inconel 601, Inconel 617, Inconel 625, Inconel 718, Inconel 725, Inconel X-750, Incoloy 800, Incoloy 800H, Incoloy 800HT, Incoloy 825, Incoloy 926, Incoloy 890, Incoloy 925, Incoloy A286 Titanium Ferrule Fittings : Grade 2, Grade 5, Grade 7 Carbon Steel Ferrule Fittings Alloy Steel Ferrule Fittings

• Size: 1inch, 2inch, 3inch, 4inch
• Type: Seamless Pipe Fittings
• Material: Alloy Steel, Metal, Mild Steel, Stainless Steel
• Diameter: 10-20mm, 20-30mm, 30-40mm, 40-50mm
• Shape: Elbow, Round
• Thickness: 10-20mm, 20-30mm, 30-40mm, 40-50mm
• Certification: ISI Certified
• Application: Gas Fitting, Industrial Fitting, Water Fitting
• Grade: AISI, ASTM, BS, DIN, GB, JIS
• Finishing: Non Poilshed, Polished
• Feature: Corrosion Proof, Excellent Quality
• Connection: Welded
• Color: Black, Grey, Silver, Yellow
• Brand Name: Manibhadra Industries
• Technics: As Per Requirement
• Outer Diameter: As Per Requirement
• Steel Grade: As Per Requirement
• Color: BLACK

• Connection Type: Male
• Size: 1/2 inch
• Material: Brass
• Thread Size: 1/2 to 5 inch
• Head Shape: Round

STF:01 Importer Ferrule

• Finishing: Coated,Non Coated,Other
• Application: Construction,Industrial,Other
• Diameter: 0-25mm,100-125mm,25-50mm,50-75mm,75-100mm,Other
• Certification: ISI Certified,Other
• Technics: High Density Polyethylene,Other
• Feature: Other
• Shape: Round,Other
• Type: Copper Fittings,Other
• Thickness: 0-20mm,20-40mm,40-60mm,60-80mm,80-100mm,Other
• Material: Copper,Other

• Wall Thickness: 3 Mm
• Size: 1 inch
• Shape: Round
• Application: Plumbing Pipe
• Connection Type: Male
• Fitting Type: Elbow
• Brand Name: Brass
• Diameter: 1 inch

• Application: Chemical Fertilizer Pipe, Gas Pipe, Hydraulic Pipe
• Type: Ferrule
• Material: Copper
• Shape: Round
• Connection: Female, Male
• Size: 1/4 inch-1 inch
• Fitting Type: Cross, Elbow, Tee
• Pressure: 700 psi
• Brand: SPARK STEEL

• Material: AISI304, AISI316L
• Size: 1/2""-12", DN10-DN300
• Feature: Corrosion Resistance, High Quality
• Machine Ferrule: By Forging, Then CNC
• Gasket Material: 1. EPDM, PTFE, Viton, Silicon
• Application: 1. Beer, Food, Dairy, Beverage, Cosmetics, Pharmacy and Chemical Etc Industries

• Brand Name: Indigo
• Place Of Origin: Umbergaon, Gujarat
• Usage: To accommodate the return flow of the coolant, providing a 180 turn in a much smaller space
• Size: 12” x 14”, 12” x 38”, 58” x 14”, 58” x 38”, 58” x 12”, 34” x 12”, 1” x 12", 1” x 34”, etc.
• Product Type: Copper Fittings

We are offering copper fittings for acr, plumbing and gas lines. Elbows: available in 90 and 45 angles, our elbows are perfect fitments for angular joints changing the direction of the pipe and have a close radius to fit in the tightest possible space. Many other varieties are available for specific requirements. u-bends: ideal for compact applications, our u-bends are used to accommodate the return flow of the coolant, providing a 180 turn in a much smaller space. We manufacture both expanded as well as plain u-bends for condensers and evaporators. couplings: we offer couplings in various dimensions, which are used to connect two pipes of different diameters as well as to joint two identical size tubes together. tee: tee is a fitting in the shape of a 't' where top of it is the continuous pipe run and the vertical section is a branch connected to it. Tees offer multiple options and used in a variety of applications. We offer varieties of tees multiple dimensions like one end having smaller diameter and cross tees, which are used to connect four tubes or a threaded tee when the vertical section of it has female threads. reducer: reducers are a type of fitting which is used to connect two copper pipes. They come in many different sizes allowing us to use one copper fitting for these copper pipe connections. The general sizes available are 12” x 14”, 12” x 38”, 58” x 14”, 58” x 38”, 58” x 12”, 34” x 12”, 1” x 12", 1” x 34”, etc as per the client specification. Non-standard fittings: indigo metalloys also manufactures non standard custom made fittings as per client design and specifications.

• Material: Mild Steel, GI
• Feature: Easy to fit, Minimum maintenance, Dimensional accuracy
• Thickness: 6.35 mm To 8 mm
• Size: 15 NB To 150 NB , 200 NB To 500 NB
• Class: B Class & C Class
• Surface Finishing: HR, CR Etc

We are comfortable with online and traditional payment methods. Our policies related to payment procedures are transparent. We believe in professionally managing payment agreements. We have adopted modern work methods that aid us completely in maintaining records and give us alerts time-to-time when any products goes short in the shelf.