Gas Transmitter Dealers in Mumbai

Field, wall mount universal transmitter. Available in Weather-proof, Blind and Explosion-proof housing. Standard 4-20 mA transmission, compact electronic module. 2 wire or 3 wire technology. Suitable in the hazardous area.

• Material: Stainless Steel
• Frequency: 50 Hz
• Color: Blue
• Brand: Fuji
• Packaging Type: Box
• Usage/Application: Gas Level Transmitter
• Voltage V: 220 V

• Range: 3 Bar
• Accuracy:  ±0.25%
• Parameter: TOXIC GASES
• Display: Optional
• Output:  4-20 mA , 0-10V , 0-5V, 0.5-4.5V Ratiometric, 1-5V

Refineries, Sewage Plants, Fertilizers Plants, Stack Monitoring, Gas Cylinder Bank, Ambient Monitoring, Pulp and Paper plants. Oil and Gas Industries, Gas Pipeline projects, as Metering Station, Heat Treatment Plants, Automotive Industries, Chemical Storage Area, Burner / Furnace Area, Power and Industrial Plant, Bullet Yard / Storage Yard, Chemical Processing Plants, Coal Mine and Confined Area, Offshore Drilling & Processing, Chemical & Petrochemical Plants, Acid Alkalizes & Dyes Mfg. Plants   Special Features : Highly resistant to poisoning and etching Capable of detecting down to PPM, %LEL & %V/V. Digital display of gas concentration on Seven Segmet Display Standard 4-20mA signal output with configurable range Easy handling and programming with 3 keys Can be programmed using Remote Control from 10 meters in line of site distance Non-intrusive programming for Flameproof model using Magnetic pen Password protected programming with password changing facility One man auto software Gas Calibration Optional STEL and TWA set points can be configured for Toxic Gases Optional RS-485 communication port with MOBDUS RTU Protocol Provides a fast reliable output by using Electro Chemical / Pellister Sensor Technology Optimized for detection of smallest leak of Toxic and Combustible Gases  

• Sensor: Electrochemical Sensors for toxic gases and oxygen Catalytic bead sensors for flammable gases PID/solid state sensor for VOC's
• Display: 8x2 Alphanumeric LCD Display
• Function Keys: For Non-Intrusive Calibration
• Alarms: Visual LED's(Power & Alarm)
• Output: 4-20mA / RS 485
• Maximum Load Resistance: 500
• Gas Sampling: Diffusion
• Case Material: Explosion proof enclosure
• Diameter: 120mm
• Height: 70mm
• Weight: 1.700kg
• Certification: Electronics encolosed in FLP JB CMRI certified to Ex d IIC T6

Flameproof Certified Gas Sensor Housing Optional Local digital Display * Easy maintenance * Quick‐ fit Sensor replacement * Explosion Proof Junction Box Certified by CIMFR. Also  ATEX approved if required. * High accuracy, Linear Output * 4‐20 mA Transmitter O/P For PLC, DCS, SCADA * Measuring Combustible / Vapors (0‐100%LEL),Toxic gases and O2    

Indoors or outdoors, our PrimaX I Gas Transmitter provides dependable, accurate gas detection. The transmitter detects toxic gases and oxygen and is housed in an antistatic, reinforced nylon enclosure. It also has a large, easy-to-read LCD screen and attaches to an integral mounting plate for easy installation, while the built-in keypad makes for quick, simple calibration. To transmit data, the unit uses a 4-20 mA output signal and can also be configured to use HART digital communication. With easily replaced plug-in sensors, the PrimaX I transmitter is suitable for laboratories, chemical plants, power plants and several other industry settings.   The indoor/outdoor PrimaX I Gas Transmitter detects toxic gases and oxygen Worry-free transmission with a 4-20 mA output signal and optional HART digital communication Plug-in sensors and easy installation and calibration make this transmitter virtually trouble-free Large LCD screen provides information at a glance

• Features: Higher accuracy and better lifetime achieved using NDIR sensor Technology, Optimized for detection of smallest leak of Combustible gases and Carbon Dioxide, Highly resistant to poisoning and etching
• Applications: Gas Metering Station, Gas Metering skid, Gas Cylinder Bank, Oil & Gas Industries

• Type: Gas Transmitter
• Material: Cast Aluminum
• Color: Grey
• Feature: Accuracy, Alarm System, Durable, Easy To Use
• Application: Transmitter
• Display Type: Digital
• Power Source: Battery
• Warranty: 1Year
• Gas Type: Toxic Gas

We are one of the leading Manufacturers and Suppliers of Toxic Gas Transmitters in Mumbai. Toxic Gas Transmitter 1000D is a series of direct use sensor-transmitter combination units housed in weatherproof (IP65) enclosures. Alternately, Toxic Gas Transmitter is also available in FLP version suitable for hazardous areas (IIA/IIB). Toxic Gas Transmitters are designed for standard two wire operation where the output is supplied via the same wire pair as the power supply. The external circuit loop is connected to the Toxic Gas Transmitter through a screw terminal connector. The units are supplied pre-calibrated for the specified range, and the sensitivity of the device should not drift by more than 2% of full signal per month. Some sensors have cross interference effect of other gases. It is important to specify air composition to help choose appropriate sensor for the Toxic Gas Transmitter. Features Of Toxic Gas Transmitter Can be operated over a wide power supply range (Nominal 24 V DC) Total loop resistance in external circuit depends upon the operating voltage Maximum loop resistance includes measuring resistor at the remote receivers and any series meters for calibration Sensors require just few seconds to settle after start-up Some models (analog type) provided with potentiometers for routine span and zero adjustment Except requiring periodic recalibration, transmitters are maintenance-free Provide faultless service throughout the working life of the sensor Circuit uses SMD and microcontroller based design to provide excellent linearity, accuracy and stability Circuit imposes no constraints on the sensor Performance characteristics of sensor are unaltered by addition of circuit board Optional Enhancements For Toxic Gas Transmitter 4 digit LCD display Multi-parameter back lit LCD display HART protocol output Modbus protocol PC calibration Programming facility Highlights Very low maintenance 4 digit LED display Microcontroller SMD components Weather proof dust tight IP 66 enclosure Aesthetical looks 2 wire 4-20 mA output Compatible : DCS, PLC, PRISM Monitors Loop powered wide OPTG voltage High sensitivity sensor Connections To Controller Use Positive and Signal terminals of the controller Controller must have a loop shunt resistor Max. Loop resistance with 24 V supply is 500 ohms including cable resistance Do not connect ´N ´terminal. This is for service personnel only

Indicating or Non Indicating. Discrete Analog 4- 20mA. Compatible with PLC, Scada and DCS. Power Supply 24VDC Gas Specific, Long life Sensor.  Relay contacts could be typically used to actuate remote alarms, increase ventilation, shut off gas supply, or shut down a process. Should it not be feasible to install the sensor at the desired location because of maintenance, or operational consideration, a suction based sampling system can be employed. The Sensors Detectors are of very sturdy construction, with weather proof or ex-proof housings and are designed to serve for several years under normal Operating Conditions.

The ERRU 4.5 kW used in Indian Railway AC, non AC coaches receives the 3-phase AC voltage generated from a brushless alternator. The output of the alternator is AC in nature with variable voltage and variable frequency depending on the motion of the train. This AC voltage is rectified and passed through the controller to generate regulated DC voltage as required for AC and non AC coaches. It also charges a battery bank through a voltage and current controller.

• Application: monitoring incoming and outgoing air (energy management) in HVAC applications
• Features: low dependence of angle of inflow , probe diameter 8mm (0.3”)

The EE75 series air velocity transmitters were developed to obtain accurate measuring results over a wide range of velocities and temperatures.

• Features ::  

The Sensor Transmitter Integrated Area Monitor (ST-IAM) utilises a range of sensor technologies to detect most gases. The ST-IAM can be used on a stand-alone basis or integrated into Controls or Building Management Systems (BMS).   Application :   Refrigerant gases all refrigerant gases including: Ammonia, Carbon Dioxide, Hydrocarbons, Halocarbons - HFCs, HCFCs, CFCs.   Combustible gases such as: Methane, LPG, Propane, Butane, and Hydrogen   Toxic gases such as: Carbon Dioxide and Ammonia in refrigeration, Hydrogen Sulphide in sewage treatment and Carbon Monoxide in underground car parks   Volatile Organic Compounds such as: Acetone, Benzene, Carbon Tetrachloride, Chloroform, Ethanol, Toluene, Trichloroethylene.

• Accuracy: 2.00%
• Material: SS316
• Input line signal: 24 VDC
• Measuring Range: 0-100% LEL
• Minimum Detectable Concentration: 0.1% LEL
• Humidity: 15 to 95% RH, typical, 0 to 99% RH intermittent (non-condensing)
• Display Type: Digital
• Detector Type: Fixed Single Gas
• Name of Gases Detected: LPG
• Model: OLCT700 IR
• Brand: Oldham
• Power Source: Plug-In
•  :  

flp gas transmitter, Pressure Gauges