Gas Valves Dealers in Sakinaka, Mumbai

• Feature: Blow-Out-Proof Casting Approved , Durable , Easy Maintenance.

Material: ss304, ss316 size: 12 to 2 inch pressure: high pressure , low pressure , medium pressure , vacuum temperature of media: high temperature , low temperature , medium temperature , normal temperature iso 5211 actuator mounting flange (optional).

 ball valve is a flow control device which uses a hollow, perforated and pivoting ball to control liquid flowing through it. It is open when the ball's hole is in line with the flow inlet and closed when it is pivoted 90-degrees by the valve handle, blocking the flow

The CGV Series control valves are suitable for handling steam and water. The valve body is designed for smooth flow profile, which minimizes pressure loss and provides better Cv and rangeability.

A prominent supplier of huge range of Ball Valves.

• Size: 1.1/2inch, 1.1/4inch, 1/2inch
• Material: Cast Iron
• Feature: Blow-Out-Proof, Casting Approved, Durable
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Temperature Of Media: 0 Degree Celsius To +70 Degree Celsius

Single piece valves - The ball is enclosed in the body by an insert fitted along the valve's axis. This eliminates the possibility of body joint leakage and any chance of disconnection whilst in service, but when maintenance is required, the whole valve has to be removed from the pipeline. Two and three piece valves - The body of the valve is split in one or two places in the same plane as the valve flange, and these pieces are bolted together. This has the advantage of simplified, in-line maintenance. Top entry valves - The ball is inserted through a bonnet in the top of the valve. This facilitates in-line maintenance.

Limiting Orifice Gas Valves regulates the flow of gas in the burner for adjustment of air gas ratio. Limiting Orifice Valves are installed in upstream of nozzle mix gas burner for adjustment air gas ratio. A V-port plug is adjusted to increase or decrease of flow of gas. Limiting Orifice valves are not designed for turning off gas for which suitable shut-off valves are to be installed in the upstream.

High Pressure Ball Valves • Pressure Rating -: Up to 3000 PSI (210 bar) with PTFE Packing.Up to 6000 PSI (408 bar) with Delrin Packing.Up to 10000 PSI (689 bar) with Peek Packing.• Temperature Rating-: -54°C to 204°C with PTFE packing.-30°C to 100°C with Delrin Packing.-54°C to 260°C with Peek packing.• Available in 2 Piece design, 3 Piece Design.• Available in 2 way, 3 way & 5 way ball Valve. • Size-: 1/8” to 1” Pipe Thread.1/8”OD to 1”OD and 3mm OD to 25mm OD.• Optional Panel Mounting.• Variety of end connections-: Male & Female NPT, BSPP, BSPT, ISO tapered pipe ends.• Available in SS304L and SS316L.• 100% factory tested.• Heat code traceability.

• Size: 15 mm

Body :Cast Iron : IS 210 Gr. FG 200 SG Iron-ASTM A536, Gr.60-40-18 (DIN 0.7043)(GGG40.3). Cast Steel: ASTM A 216 Gr. WCB St.St.: ASTM A 351CF8 (SS304), or ASTM A351CF8M (SS316).Stem Packing :Self adjusting, Spring loaded, Teflon Packing. Working Fluid Pressure:Refer to table below.

We Present a Range of Ball Valves with Options in Single Piece, Two Piece & Three Piece Design Construction. They have a Pressure Rating Up to 1500 Class and are Available in Both Regular & Full Port Construction in Different Combination of Body and Trims to Suit Your Various Requirements. features wide Range of Designexcellent Qualityvariety in Constructionefficient Working applications chemical Industriespharmaceutical Industriesoil Industries

We are the leading supplier of top quality Ball Valves which find applications in diverse industries. Ball Valves are typically used in industries because they are very versatile and can support very high temperatures and pressures. They are easy to repair and operate. We supply them at very competitive prices and guarantee full customer satisfaction. Features : Very versatileDurableSturdy Range : Trunnion Mounted Ball ValvesFloating Ball ValvesSub-Sea Ball ValvesCompact Ball ValvesDouble Block and Bleed Valves

BALL VALVES : WESMEC Ball Valves are designed to applicable standard. Only a quarter turn operation is required to close the valve from fully open condition and vice-versa. The inside ball moves on Teflon seals and stem faces contact with the Teflon rings. There is low operating torque in the operation of valve for long time.   FEATURES: • One Piece, Three Piece Design, Two Way, Three Way, Five Way Designs. • Available in a variety of end connections. • They are used in two way as well as three way design with bottom entry and other outlet ports in the same plane. • Panel mounting available as an option. • Low operating torque. • Floating ball design to ensure leak proof shut off at high pressure.   • Integral Ball Stem is machined from one single piece for switching model. • Hydraulic Test Pressure: (BODY) up to 210 Kg/Cm². • Hydraulic Test Pressure: (SEAT) up to 150 Kg/Cm². • Pneumatic Test Pressure: 10 Kg/Cm². • Their compact design is ideal for applications that require minimum carry over fluid when switching from port to another. These valves are also used for static and vehicular CNG (compressed natural gas) applications. • Non Destructive Test (NDT) available on request. • Positive Material Identification Test (PMI) available on request. • Standards Followed: ASME B16.11/ B1.20.1, API 598/608, ISO 17292, ASME BS 4368 Part IV/BS 5351, CE Marking. • Marking and Identification of Valves as per MSS-SP-25.

Slab Type Gate Valve, Mini Ball Valve, Testing Services

Api Gate Valve, AUDCO VALVES, Pressure Seal Valve, Check Valves

PVC Pipes, Hydraulic Cylinders, Hydraulic Power Packs, Air oil coolers

Y Type Strainer, jacketed valves, Forged Steel Globe Valve