Gasket Sheet Dealers in Sion, Mumbai

• Material: Rubber
• Usage/Application: Industrial
• Temperature: -30 to +220 Degree C
• Color: Black
• Packaging Type: Box
• Pattern: Plain
• Gasket Shape: Round
• Hardness: Upto 80 ShoreA

• Brand Name: REX

We offer high quality graphite sheets and gaskets have excellent resistance to chemical, air, water, oil, fuel, etc. They have a built – in anti stick property hence using the product solves the problem of adhesion to the flanges. Due to 98% graphite content and 1% corrosion inhibitor, this material can be used at high temperatures and for all acids and alkalis. This is not recommended for use with nitric acid.

All information and recommendations given in this brochure are correct to the best of our knowlegde . Since condition of use are beyond our control, the information provided can only serve as aguiline. Users must satisfy themeselves that products are sutable for the inteded processes and uses. We resevre the right to change product design and propertoes without notice.

• Temperature: 400oC

A cost effective product manufactured from ecofriendly natural cellulosic fibres bonded with suitable mix of elastomers. General purpose gasketing material suitable for use with Oils, Solvent, Gases, Water, L.P.Steam and most dilute acids and alkalies (low service conditions).

• Material: Silicon
• Brand Name: Spitmaan
• Size: 1525 mm x 1650 mm
• Thickness: 0.4 to 5 mm
• Specification Compliance: (Indian IS 2712-1998 Grade W/1 IS 2712-1971 Grade A/S DGS & D G/MISC/81-C item 12 (a) Special Quality British BS 2815-1973 Grade A

Type Graphite gaskets are made from homogeneous graphite, reinforced by metal mesh, foil or tanged metal. It offers excellent sealing capabilities such as thermal stability, self-lubrication, corrosion resistance, not being brittle and aging etc. It has long life and less maintenance is required under very extreme conditions.The rimmed metal gasket is an improvement from pure cut gaskets. The metal foils rimmed at inner and outer edges offer a special protection against blowout and chemical corrosion for the gasket, and increase the pressure resistance capability. Material   Various shapes are available, used in petrochemical, mining, vessels, boilers, piping and ducts, pumps and valves, flanges etc. Suitable for steam, mineral oil, heat transfer oil, hydraulic oil, fuel, water, seawater, freshwater etc.

Moderately priced, general purpose steamjointing, most suitable for tde commonly faced requirements in any industry for jointing orgasketing purposes.

• 1525mm x 1650mm To 5000mm: 0.4, 0.5, 0.75, 1, 1.5, 2, 3, 5 (All sizes are in mm

Compressed Asbestos Fibre Jointing is a consistently uniform, solid run constructed and resilient product, a price worthy quality of dependable performance. Its adaptability to many sealing requirement makes this jointing the most Economical sheet packing choice of plant Engineers and maintenance men for low service conditions.Red or Graphited finish.

Compressed Asbestos Jointing sheets are a consistently uniform and resilient product. A price worthy quality of dependable performance, plus adaptability to many sealing requirements makes this ‘STEAM’ jointing the choice sheet packing or of Plant Engineers and maintenance men. Spitmaan Style 20 Asbestos Jointing sheets are developed for general purpose applications and this quality is applicable to a wide range of duties with less severe working conditions of temperature and pressure.

Max. Short Term Service Temperature 400oCMax. Continuous Service Temperature 240oCMax. Operating Temperature for Steam 200oCMax. Operating Pressure in Bar 75 barsSheet Size: 1.5 mtr width x 1.5 mtr AF High Pressure Asbestos Free Gasket Sheets are used for oils, solvents, water, steam, gases, dilute acids and alkalies, glycols and aqueous solution. Available: Non Metallic/ Metallic

flexibal graphite tape, Graphite Sheet, ptfe packing material, ptfe yarn

flojet graphite tapes, electrical engineering products

• Size: 10 mm to 50 mm
• Packaging Type: Roll
• Adhesive Side: One Side
• Material: Graphite
• Pattern: Corrugated
• Color: Black
• Roll Length: 10 mtr
• Thickness: 0.5 mm

Gasket Selection:Gaskets must maintain a seal for an acceptable period against all of the operational forces involved and to achieve this there are eight important properties which any good gasket should possess: The gasket should not be porous to the fluid being sealed. The gasket should compress into the imperfections on the flange to create initial seal on application of sealing force. The gasket should not show significant creep under the influence of load and temperature. Such flow will allow the bolts to relax, reduce gasket surface stress and cause leakage. The gasket should be capable of catering to slight distortion between the flanges. The gasket should withstand chemical attack from the media being handled. The gasket has to be easily dismantled after use. The gasket should be able to withstand effects of temperature of the confined media. The gasket should not cause corrosion of the flange faces. Champion Asbestos free jointing sheets are manufactured on latest factory equipments and developed with the aid of research and scientific facts to take care of one and all of above factors combined with highly specialised technical knowledge of Engineers with experience of a life time. Our products meet with the increasingly exacting requirements in Engineering and chemical industries for contact gaskets on fixed sealing faces. Champion Asbestos free jointing sheets are manufactured to international quality standards, which our customers can depend upon. The operating temperature for Asbestos free jointing sheet material is related to the thickness selected. Thinner materials offer better temperature and pressure properties.SHEET SIZE: 2M x 1.5M upto 6M (variation±5%)Nominal Sheet Thickness Approx: 0.4/0.5, 0.75/0.8,1.0,1.5,2.0,3.0 mm upto 6.0 mm (variation ± 5%) 

• Type: Copper Gaskets
• Material: Copper
• Application: Electric Use, Fittings Use, Industry Use
• Condition: New, Used
• Finishing: Non Polished, Polished
• Feature: Durable, Fine Quality, High Strength, Perfect Shape, Rust Proof, Strong Construction, Superior Finish

• Temperature: - 100°C to +260°C
• pH Range: 0 - 14
• Pressure: 100 Kg/Cm²
• Shaft Speed: 12 Meters / Second

Constructions:An extremely low friction extruded soft and dense packing made grade of PTFE, graphite and high temperature lubricant.

Grafseal Universal Adhesive Gasket Tape, Ball Bearings

caf jointing sheet, Fibre Filled Lagging Rope

Non Asbestos Ceramic Millboard Sheet, ptfe thread sealant tape, hdpe products

Non-Asbestos Gasket Sheet, Oil Tapes

Asbestos Jointing Sheets, Nylon Sheets, RODS

c.a.f. jointing sheets, pvc coaster, Nylon Fittings, pvc cloth

Jointing Gasket Material

Non Asbestos Gasket Sheet, polyurethane washer, PTFE Machine Gasket