Gear Pumps Dealers in Naigaon, Mumbai

WORKING : There are two Pumping Elements with Gear in Gear Principle. The Rotors are mounted on single shaft well supported on both the ends. As the Shaft Rotates, they mesh & un-mesh displacing the liquid axially through its pumping elements. Axially flow through elements ensures better suction capabilities, very low noise level and nearly pulsation free flow. These pumps have low power consumption compared to other brands due to unique mounting rotors. Rotors are produced using sintered metal technology and the other components are produced using the advanced manufacturing techniques with all the necessary quality checks for repeated accuracies in dimensions, guaranteed interchangeability and near to perfect pumping characteristics. This Series is highly reliable when put to work on field, has longer service life, practically needs no maintenance and has reduced cost of the end product than the conventional equivalent to the customer. A standard pump would consists of Rotors in Sintered Iron, with built – In Relief Valve, Shaft in EN-8 / SS-304, Lip Seal in Nitrile and all other parts in Cast Iron. APPLICATION : Unloading and Transfer of Lubricating Oil from Tanks and Barrels Oil Circulation, Gearbox, Bearing and Pressure lubrication Transfer of Fuel Oils from Daily Service Tanks, Pre Heaters and Filters Transfer and Circulation of Oil in Transformer & Oil Cleaning Machines Fuel Injection Pumps and as Booster Pumps in Oil Burner Services Unidirectional Flow Designer and Reversing Shaft Duties as in Machine Tools, Gear Boxes and Crane Duties In Hydraulic Power Packs Low Pressure – Continuous and Intermittent duty application TYPICAL LIQUID LIST Lubrication Oils, Fuel Oils like HSD, LDO, Furnace Oil, Transformer Oils, Palm Oil, Hydraulic Oils, Additives, Shampoos, Coconut Oil and media having good lubricating properties OPTIONAL MOC Under Special Execution we can offer pump in Stainless Steel, Ball Bearing Construction and Seals in Viton or EPDM. MOUNTING Monoblock type Pump and Motor eliminating need of Coupling and Frame. Foot Mounted Pump Coupled with Motor on a Base Plate with Coupling Guard Flange Mounted Pump Coupled with Motor using a Bell Housing Bracket FEATURES Compact, Light Weight, Easy to Mountain and Neat Design Can be Serviced in place without disconnecting the pipelines & Motors (Applicable even for Mono Block Construction) Bi-Directional Integrated Shaft in Mono Block construction eliminating the shaft runs out for the improved life of the lip seal. Also, Shaft is supported on 2X Bush Bearing as well as 2X Ball bearing reducing the load on shaft as well as the pumps Pump Shaft Dynamically balanced and Heat Dissipation is improved in Mono Block Design Engineered to run at high Speeds and adaptability of Mechanical Seals for Critical Applications even for lower flow rates Advanced Metallurgical Composition for Better and Longer Rotor Life Lower Power Consumption & High Volumetric Efficiency Pump with steam Jacketing on Request With Built-In relief Valve Improved Rotor Profiles for Smooth Meshing minimizing the Internal Losses and for excellent Suction Capabilities

• Power: AC Powered

External gear pump uses two identical gears rotating against each other -- one gear is driven by a motor and it in turn drives the other gear. Each gear is supported by a shaft with bearings on both sides of the gear. As the gears come out of mesh, they create expanding volume on the inlet side of the pump. Liquid flows into the cavity and is trapped by the gear teeth as they rotate.

• Country of Origin: India
• Type: Rotary Gear Pump
• Certification: ISO 9001:2008
• Application: Gear System

The geometry of the two rotors partitions the volume between them into N different dynamically-changing volumes. During the assembly's rotation cycle, each of these volumes changes continuously, so any given volume first increases, and then decreases. An increase creates a vacuum. This vacuum creates suction, and hence, this part of the cycle is where the intake is located. As a volume decreases compression occurs. The Flow of liquid is axial through the elements.

At the initial stages of using raw material for the production, our dedicated quality staff makes certain that the inputs used are of premium quality. Thus, our offered range is highly appreciated for the quality. Buyers can rest assured; the delivery of consignments will be done within the stipulated time. Our products can be ordered in bulk as well as in retail.

• Brand Name: HPI
• Power Source: AC Powered
• Motor Horsepower: 2 HP
• Maximum Pressure: 200 bar
• Usage/Application: Industrial
• Motor Speed: 1440 rpm

The very first pump produced by Delta Group in 1968 was an Internal Gear Pump Model DIG-10 for low-pressure burner service - till this day it is in production with great success. Subsequently Delta Group had the foresight to introduce several other designs, to take care of growing industrial demands, thus placing themselves on the forefront in the field of Rotary Positive Displacement Pumps. Experience gained over years in designing and building Rotary Pumps combined with knowledge in Application Engineering has resulted in this development of New Stainless Steel Internal Gear Series specifically for food, chemical and pharmaceutical industry. Innovation, simple construction has ensured very easy maintenance and totally reliable hassle free installation. Working Principle Delta DIG series employs proven Internal Gearing (Gear within Gear) principle for pumping. The main gear is keyed to the drive shaft, and rotates concentric in the pump casing. Idler is located on an eccentric pin on the front cover to rotate freely and meshes with main gear when assembled. A crescent shaped partition precision machined on the front cover maintains a small, but positive clearance to achieve perfect scaling between parts. As the gears come out of mesh, a partial vacuum is created, forcing the fluid to rush into the pump casing and fill in the voids between the teeth. Both gears rotating in the same direction of rotation gently transfer the fluid to the delivery port. The resulting action is a smooth-steady flow; low in pulsation, noise and vibration.Single shaft design well supported on outboard bearing (except for one inside sleeve bearing) enables to pump products even with poor lubricating value unlike in the external gear pumps. External bearing construction offers easy access the pump components i.e., rotor set and even pump casing simply by removing the front cover without disturbing drive parts, bearings etc., and in place. Block pump mounted integrally on hollow shaft gearbox automatically reduces the speed (in several ratios) and enables even the pump rotor to be pulled out without disturbing the drive! It is easily possible to jacket front and rear covers for products heating - thus making the design unique and versatile - ideally suited for process pumping.Salient Features Smooth quite flow ReversibilityExcellent self priming Bracket/ Gear box mounting allows free expansion/ contraction - alignment not affectedInsensitive to viscosities Easy maintenanceAll metal construction, no contamination Built-in reducer offers ideal speed range 240~960 RPMSingle sealing, external bearing Slow speeds ensure better pumping & longer lifeLow noise and pulsation Reduced maintenanceConstruction The DIG series is modular developed with excellent interchangeability. The pump is available either as bracket mounted 'BM' or gearbox mounted 'GM" models. The bracket mounted casing construction provides stress free operation while handling products at higher temperatures. The major components are casing, front cover, rear cover, seal box (casing parts) and rotor set (rotor, idler and shaft). Most casing components are made by lost wax process for better finish and grain structure.'GM' version offers a choice of different speed ratios, making it easy to handle viscous products besides eliminating problems of alignment, extra set of coupling. Standard 4 pole or 6 pole motors can be directly coupled to such units making it very reliable, compact and clean drive. Another unique feature is the adjusting clearance between rotor set and cover by means of rotor positioning device enabling to restore pump capacity even after wear and tear after a long use.Pumps can be equipped with Heating/ Cooling Jacket on front cover/ rear cover and in some cases also Pump Housing. Choice of Mechanical Seal/ Stuffing box is available for shaft sealing.Typical ParametersCapacity upto 800 LPMPressure upto 14 kg/cm2Viscosity upto 100,000 cStTemperature upto 200°C

Pump

Gear Pumps, Positive Displacement Pump, Rotary Pump, Screw Pumps

Gear Box Housing, Gears, Pinions, Gear Train Assemblies