Generator Set Dealers in Khar, Mumbai

• Condition: New
• Application: Agriculture, Construction, Induatrial, Power
• Fuel Type: Diesel

Ajinkya Electronic SYstems offers a wide array of highly efficient profile generator that generates voltage current signal output against time. The waveform pattern to be generated are to be programmed by the user. Our profile generator are available with the following options such as RS232 RS485 Modbus interface, serial printer interface, data logging and voltage signal input.

• Power: 10 to 250 kVA
• Brand Name: Ghatge Karkera
• Type: Automatic
• Phase: Three Phase
• Rpm: 1500
• Fuel type: Diesel

• Purity of Gas :: UHP / GC Grade
• Capacity of Gas :: 300 ml/Min at 6 kg/cm & 800 ml/Min at 6 kg/cm
• Method of Purification :: Pressure Swing Adsorption (PSA)
• Room Temperature :: 5 - 30Ã��Ã�ºC
• Supply :: 230VAC Ã��Ã�± 10%,50Hz

One of the most popular applications of PSA Technology is in the operation of Nitrogen Generators. This Process is based on the selective adsorption phenomena of gas molecules which is Carbon based Molecular Sieve (C. M. S.) In Pressure Swing Adsorption system as soon as compressed air is entered through an adsorption tower filled with Carbon Molecular Sieve, the molecules of gases like oxygen, moisture & other undesired gases are adsorbed on surface of the adsorbent. While Nitrogen that is not adsorbed passes out of adsorption tower. It is then collected in a surge vessel. For continuous flow of Nitrogen two adsorption towers are installed. They are inter connected with Auto change over valves. These Auto change over valves are controlled by Timer Circuit, as the saturation of one tower with oxygen gets completed, in built mechanism makes the process automatically switch to another tower and thus the nitrogen production remains continuous. Nitrogen has a wide range of industrial application. Different Capacity of Laboratory Based Nitrogen Gas Generator are available Tecnical Specifications Moisture Content < 2 ppm Oxygen < 5 ppm Total Hydro Carbon < 0.3 ppm CO & CO2 < 2 ppm   Salient Features   Nitrogen Generator for low investment Low Electric power consumption. Calibrated needle valve to adjust purge flow. No moving parts. Hence negligible maintenance. Easily installed - just make the air connection Plug in the electrical power cord. Skid mounted unit need no pounds. Pressure capacity : from 4.0 - 7.0 Kg/cm2

The ICI CALDAIE medium/high pressure hot water boiler model ASX is a fully packaged unit,complete with accessories for easy installation. It features a large volume flame reversal furnace with low heat release characteristics. The larger sizes of boiler incorporate a corrugated furnace, and this feature together, with the generously proportioned furnace in terms of length and diameter, ensures an even distribution of heat within the combustion chamber guaranteeing perfect combustion with both oil and gas firing. Such furnace geometry ensures that overheating of the tubes and tube plates is avoided and the longevity of the boiler is assured.   High efficiency guaranteed with every fuel medium/high pressure hot water boiler up to 12 bar. The ICI CALDAIE medium/high pressure hot water boiler model ASX is a fully packaged unit, complete with accessories for easy installation. It features a large volume flame reversal furnace with low heat release characteristics. The larger sizes of boiler incorporate a corrugated furnace, and this feature together, with the generously proportioned furnace in terms of length and diameter, ensures an even distribution of heat within the combustion chamber guaranteeing perfect combustion with both oil and gas firing. Such furnace geometry ensures that overheating of the tubes and tube plates is avoided and the longevity of the boiler is assured.   High efficiency is essential: ASX guarantees it withOperating Efficiency The ASX Hot Water boiler guarantees a maximum net working efficiency up to 92% at both high and low thermal load demands. This is mainly due to the generously sized internal transfer surface and the 80mm thick mineral wool lagging. The boiler shell is clad externally by aluminium sheet panels. Special attention having been paid to the elimination of heat bridges across the entire surface of these panels, the upper level walkway and the upper part of the piping panel. Maintenance and Cleaning The internal parts and accessories that make up the boiler, are within easy reach to facilitate cleaning, maintenance and inspection to ensure the safety and long life of the boiler.   Instrumentation and Safety Equipment The accessories supplied with the boiler are those requested by regulation for acquiring the exemptions of use on the premises. These include: • 2 CE approved safety valves • 1 large dial pressure gauge • 1 bottom discharge valve • 2 control thermostats   Built with Company Quality System UNI EN 29000. The boiler is built with materials and procedures that comply with European directives. The Company Quality System controls and authorises the use of materials, production and final testing; particularly: • ultrasonic testing of sheet metal; • radiographic testing of welded parts; • hydraulic testing of pressure; • safety valve calibration check; • correct functioning of the electric control panel in terms of regulation and safety equipment. The ASX Hot Water Boiler is supplied with a document that contains all the certificates of approval in terms of materials and testing and also a declaration of conformity of the current regulations.   1 manual reset high limit thermostat • 1 dial thermometer • 1 manual reset safety pressure switch • 1 control panel PVC-sheeted silicone insulated cored wiring on top of the boiler links the electric equipment to the command panel   ASX Medium/High pressure hot water boiler   1. Control panel 2. Pressure switch 3. Thermometer 4. Pressure gauge 5. High/Low thermostat 6. Control thermostat 7. High limit thermostat 8. Front plate 9. Flame inspection port 10. Burner plate 11. Inspection door 12. Safety valves 13. Rear smoke boxr 14. Flue connection 15. Cleaning door 16. Drain fitting N1. Flow N2. Return

• Attenuation: 20db / 40db.
• Frequency range: 0.2-2MHz.

The instrument is an accurate testing instrument.It can output the function wave: sine wave, square wave, rectangle wave, sawtooth wave and triangle wave.The frequency, amplitude and duty cycle can be adjusted continuously.5- digit LED frequency display, 3-digit LED amplitude display synchronously.

• Dimensions: 798 x 840 x 2022 mm (W x D x H)
• Weight: 270 kg
• Nitrogen outlet pressure: 6 bar(g)/87 psi(g)
• Ambient air temperature: 20 deg C/68 deg F
• Pressure dewpoint inlet air: 3 deg C/37 deg F

• Flow Rate: 1-1000 Nm³ / hr

Nitrogen PlantGenerator operating on PSA technology, consists of twin tower system filled with special grade of imported carbon molecular sieves (C.M.S.) at a time, one tower keeps in production cycle and other in regeneration cycle. When compressed air passed through C.M.S. bed, the molecules of oxygen, moisture & other unwanted gases are adsorbed on surface of C.M.S. And the nitrogen which is not adsorbed by C.M.S comes out of adsorption tower and is collected in a surge vessel. Two adsorption towers are provided which are interconnected with auto change over valves controlled by a sequence programmer(PLC). When one tower saturates with oxygen the process automatically changes over to another tower.This ensures the continuous production of the Nitrogen gas.

• Country of Origin: Made in India
• Power: 10kW
• Voltage: 380V
• Material: MS
• Usage: Industrial

Features Amsons Ozonics Model AM 2G/5G VS Series Input 230 volts 50 Hz single phase High barrier Quartz dielectric Corona based IGBT high voltage Medium freq Aluminium / Stainless Steel electrode / Quartz Air consumption 5lpm silica gel dryed Venturi Suction Air cooled / water cooled technology Stainless steel/mild steel model available Circuit protection / flow control / PLC based model available

HAG SERIES Oil LPGNatural gas fired – 50,000 to 60,00,000 Kcalhr UNITHERM'S LPG/NATURAL GAS fired air heating system is designed specifically with large Industrial drying in mind. It's superior design, efficient performance and high fuel economy makes it a better buy than any other heater of its kind to achieve much lower drying costs than standard conventional ovens. The unit is easy to install, simple to maintain and highly economical to operate. The design is suitable for a maximum temperature of clean hot air at 300 dEG C IN INDIRECT Fired Design & 800 Deg C in Direct fired Units

• Frequency: 3MHZ
• Brand Name: Gwinstek
• Type: Digital
• Waveform: Sine, Square, Triangle and TTL
• Model Name/Number: SFG1013
• Power Supply: AC 240V
• Usage/Application: INDUSTRY, LAB

The pure steam generation system consists of two columns – Evaporator and Separator. The Evaporator is a shell and tube type of heat exchanger. The driving force i.e. plant steam heats the feed water in the tube side of the evaporator to generate vapour. The generated vapour enters the Separator column. The separator column uses a triple punch separation technique for particle entrainment and separation of impurities such as droplets and pyrogenic material. The first punch is offered by the multi- directional baffle, which makes the vapour traverse a torturous path. In the second stage, the steam passes through a cyclone type centrifugal separator. The final blow is delivered by a Demister pad to ensure pyrogen free, dry and saturated steam.   Features Komals Pure Steam Generator is a packaged skid mounted unit incorporating all necessary controls and functions to produce Pure steam as per latest IP/BP/USP standards. Plants are available from 50 kgs/hr to 2000 Kgs/hr, These generators are basically used for Sterilization of vessels, Sterilisation of Distribution systems, Autoclave, reactors and also humidification of sterile area Full-Automatic PLC based Control Panel System with auto sanitization and printing facility. First column equipped with Double tube sheet as a provision to avoid boiler steam mixing with Purified water. All Contacts parts are SS316L with internally electropolishing < 0.5Ra Complete documentation to meet and exceed international audit requirements. The piping system is orbital welded and qualified using videoscopy procedure.

Pumps, Pneumatic Equipment, Hydraulic Equipment, Grinding Mill

Supernova technologies pvt. Ltd. Is an approved manufactures & exporters of wind generators from india.

portable engine, Pump Set, lawnmowers, sprayers brush cutter, Pumps

Diesel Welding Generator, Rectifier, Diesel Generator

Brush Cutters, portable engines, Water Pumping Set

We are offering 125kva sound proof generator. supply of sound proof generator on rental basis all capcity generator on hire

Hot Water Generators, Burners, Industrial Boiler

Power Generators, Children Wear, Mens Wear, Wedding Dresses, Women Wear

insulation products, Commutators, AC Motors, DC MOTORS or COILS

generators sets, generator parts

Generator Sets, Crucibles, rock roller belts, vibratory compactors

Diesel Generators, Water Mold Temperature Controller Unit Machine

Profile Generators, event loggers, Steam Generator Controller

Ozone Generator, Ozone Process Monitors

Diesel Generating Set, Industrial Generator, Gas Generator

Makita, Marine Engine

125 Kva Generators