Generator Parts And Accessories Dealers in Worli, Mumbai

The SANGHI-ORG Oxygen Plant, is safe and economical to operate. It comes with an efficient expansion engine, which lowers the operating pressures remarkably to as low as 32-35 kg/cm2 and also cuts down power consumption. A Molecular sieve Battery drier unit for separation of moisture and carbon dioxide is another money-saving device in the SANGHI-ORG plant. It removes acetylene and other hydro-carbons from the process air, thus eliminating the need for separate acetylene absorbers, and moreover it eliminates recurring caustic soda costs. The SANGHI-ORG Oxygen Plant is capable of simultaneously producing high purity Oxygen Gas andNitrogen Gas. It also has an internal compression Liquid Oxygen Pump to fill dry gaseous oxygen in cylinders. We also undertake supervision of Installation and Commissioning of the SANGHI-ORG Oxygen Plant. Description of SANGHI-ORG Oxygen Plant The free atmospheric air is sucked in by a multi-stage air compressor through a filter and compressed to the working pressure. After each stage, intermediate coolers and water separators are provided. The compressed air then passes through the (evaporation) pre-cooler and then to the molecular sieve battery where the moisture and carbon dioxide are removed from the process air. It then passes through the exchanger No. 1 where it is cooled by the out-going waste nitrogen and product oxygen. A part of this cold air then flows through an expansion machine and the balance through the 2nd heat exchanger. The ratio of the two air streams is controlled by an expansion valve, RI. Both these streams of air then unite in the lower pressure column where it partially liquefies.   The liquid air (rich air) then passes through the expansion valve R2 to the upper column which is at a lower pressure than the lower column. Similarly the liquid nitrogen (poor liquid) travels from the lower column to the upper column through an expansion valve R3 where the separation of oxygen and nitrogen occurs. Nitrogen being more volatile passes out as a gas from the top of the column and this waste nitrogen flows through both the heat exchangers cooling the in-coming air. Similarly product oxygen is also passed through the two heat exchangers to cool the in-coming air and then to the filling manifold via a liquid pump. If a small amount of air is vented out from the upper column, higher purity nitrogen can also be obtained from this plant. R4 Valve is provided in order to fasten cooling during start-up.

We provide a wide range of generator sets for alternative power supply. These units are ideal for rugged use and provide continuous power supply in the event of power outages and ensure optimal uptimes for commercial establishments.Q

• Model Number: D.G.SET
• Frequency: 50/60HZ
• Brand Name: UNIPHOS
• Supply Ability: 10 Unit/Units per Quarter as per Requirement
• Place of Origin: Maharashtra, India
• Port: Mumbai
• Alternator: Leroy Somer
• Lead Time: 3-4 months
• Rated Current: Depend
• Rated Power: Depends

• Type: Dg Sets
• Certification: CE Certified, ISO 9001:2008
• Color: Green, Light White, Yellow
• Feature: Easy Start, Fuel Efficient, Less Polluting
• Condition: New
• Output Type: AC Single Phase, AC Three Phase
• Frequency: 50 Hz
• Automatic Grade: Automatic, Fully Automatic, Manual
• Cooling System: Air Cooling, Water Cooling
• Noise Level: Non Silent, Silent, Soundproof
• Warrenty: 1year, 2years
• Conditon: Good, New, Used
• Speed: 1500-2500rpm, 500-1500rpm, 1500
• Produce Power: 1-5kw, 10-15kw, 100-250kw, 15-20kw, 20-25kw, 25-50kw, 250-500kw, 5-10kw, 50-100kw, 500-750kw, 750-1000kw
• Brand Name: Kirloskar
• Country of Origin: India
• CUMMINS: CATERPILLAR
• KIRLOSKAR: HONDA
• GREEN: YELLOW
• WHITE: RED

• Brand Name: TOSOKU
• Color: Black
• Usage/Application: CNC MACHINES
• ORIGIN: JAPAN
• VOLTS: 5V / 12V / 24V
• AXIS: 4 / 5 / 6
• RESOLUTION (PPR): 24 / 100
• SYSTEMS: FANUC / SIEMENS / MITSUBISHI

We also supply diesel welding generators on hire, make Advani-Oerlikon coupled with Perkins S325 engine. They are used for cross country pipeline and fabrication works at the site. They are mobile and can be shifted from places to places. It can deliver 100% radiography welding and has option of auxiliary power unit of 2 K.V.A. for 2 Nos. hand grinder running & 1 no. of halogen bulb for lightning. It can run sophisticated welding electrodes like 6010 and any type of rods. We also supply Diesel Welding Generators On Hire for used of generating and welding.

• Cooling System: Air Cooling, Water Cooling
• Brand Name: Kirloskar, Honda Power,Bajaj,Tata and Cummins
• Output Type: AC Three Phase
• Power: 1 KW to 10 KW

Oxygen Generators, adjuvant, wokozim granules, roko fungicides

• Power: 5 KVA to 75 Kva
• Brand Name: Kirloskar, Bajaj,Cummins and Tata, Ashok Leyland
• Output Type: AC Three Phase
• Voltage: 220/440 Volts
• Fuel Type: Natural Gas, Petrol, Diesel
• Automation Grade: Semi-automatic and Automatic

We offer different types of Diesel Generators that efficiently convert fuel into power to give remarkable performance. Ideal for avoiding delays caused by power failure, the Diesel Generator provided by us has made us a prominent Exporter and Supplier from India. Brands DaihatsuSulzer caterpiller Yanmar Mitsubhishi Why Our Diesel Generator? Matchless performanceHigh-end designing and constructionRust proofNegligible maintenance costCost-effective Required By Power plants Agricultural sector Dockyards Commercial establishments Factories Range of Diesel Generator AA from 300 to 2000 Kva Daaihatsu Make D.g. SetType : 6 PSHTC-18,20,226 + 8 Cykinder PSHT,PSTB,PSTHB PSHTC6 + 8 Cylinder VSTB, VSHTC6 + 8 Cylinder DS-18,DS26,DS 326 + 8 Cylinder DL 20,DL26BB. from 630 to 1000 Kva Sulzer Make D.g. Set – 2 Nos.Type : 5+6+8 Cylinder AL,ASL,A – 25/3CC. from 250 to 850 Kva Cater Piller Make D.g. SetsType : D 399,398,3412,340DD. 300 to 1850 Kva Yanmar Make D.g. Set.Type : 6MAL – HT,MAL-HTS.MAL-DTGL-ST,GL-DT,GL-UT,UL-UT,ZL-DT,ZL-ST6 UAL-UT,6UAL-STEE. 400 to 7oo Kva Sulzer Make D.g. Set.Type : 5+6+7+8 Cylinder BAH - 22,BAH-30,BAH-40FF. 412.5 Kva Man Mitsubhishi Make D.g. SetType : G 5+6+7+8V Cylinder 23.5/33 AND ATLGG. 250 to 1100 Kva Skl Make D.g. SetType : 6+8 Cylinder NVD 26,36,48 AND 6+8 VD 26/20,36,48.

turbo generators, Steam Turbines, Diesel Generating Sets, ALTERNATORS

We provide a wide range of generator sets for alternative power supply. These units are ideal for rugged use and provide continuous power supply in the event of power outages and ensure optimal uptimes for commercial establishments.

We are offering radiator dg set.

We are offering soundproof generator set

The pure steam generation system consists of two columns – Evaporator and Separator. The Evaporator is a shell and tube type of heat exchanger. The driving force i.e. plant steam heats the feed water in the tube side of the evaporator to generate vapour. The generated vapour enters the Separator column. The separator column uses a triple punch separation technique for particle entrainment and separation of impurities such as droplets and pyrogenic material. The first punch is offered by the multi- directional baffle, which makes the vapour traverse a torturous path. In the second stage, the steam passes through a cyclone type centrifugal separator. The final blow is delivered by a Demister pad to ensure pyrogen free, dry and saturated steam.   Features Komals Pure Steam Generator is a packaged skid mounted unit incorporating all necessary controls and functions to produce Pure steam as per latest IP/BP/USP standards. Plants are available from 50 kgs/hr to 2000 Kgs/hr, These generators are basically used for Sterilization of vessels, Sterilisation of Distribution systems, Autoclave, reactors and also humidification of sterile area Full-Automatic PLC based Control Panel System with auto sanitization and printing facility. First column equipped with Double tube sheet as a provision to avoid boiler steam mixing with Purified water. All Contacts parts are SS316L with internally electropolishing < 0.5Ra Complete documentation to meet and exceed international audit requirements. The piping system is orbital welded and qualified using videoscopy procedure.

turbo generators, ALTERNATORS, Diesel Generating Sets, Electric Motors

The pure steam generation system consists of two columns – Evaporator and Separator. The Evaporator is a shell and tube type of heat exchanger. The driving force i.e. plant steam heats the feed water in the tube side of the evaporator to generate vapour. The generated vapour enters the Separator column. The separator column uses a triple punch separation technique for particle entrainment and separation of impurities such as droplets and pyrogenic material. The first punch is offered by the multi- directional baffle, which makes the vapour traverse a torturous path. In the second stage, the steam passes through a cyclone type centrifugal separator. The final blow is delivered by a Demister pad to ensure pyrogen free, dry and saturated steam.   Features Komals Pure Steam Generator is a packaged skid mounted unit incorporating all necessary controls and functions to produce Pure steam as per latest IP/BP/USP standards. Plants are available from 50 kgs/hr to 2000 Kgs/hr, These generators are basically used for Sterilization of vessels, Sterilisation of Distribution systems, Autoclave, reactors and also humidification of sterile area Full-Automatic PLC based Control Panel System with auto sanitization and printing facility. First column equipped with Double tube sheet as a provision to avoid boiler steam mixing with Purified water. All Contacts parts are SS316L with internally electropolishing < 0.5Ra Complete documentation to meet and exceed international audit requirements. The piping system is orbital welded and qualified using videoscopy procedure.

• Dimensions: 798 x 840 x 2022 mm (W x D x H)
• Weight: 270 kg
• Nitrogen outlet pressure: 6 bar(g)/87 psi(g)
• Ambient air temperature: 20 deg C/68 deg F
• Pressure dewpoint inlet air: 3 deg C/37 deg F

gen sets, fridge, Microwaves