Globe Valve Dealers in Andheri East, Mumbai

We are offering angle globe valve 22 pilot operated type : ps-221-y for airwatersteam sizes: 15 mm to 50 mm (g12" to g2") these valves are suitable for applications demanding high flow due to inclined seating provides excellent flow characteristics it has low maintenance piston actuator.

• Design:  
• BS 1873 / ISO 15761:  
•  :  
• Face to Face:  
• ASME B 16.10:  
•  :  
• Flanges:  
• ASME B 16.5:  
•  :  
• Butt welding:  
• ASME B 16.25:  
•  :  
• Testing:  
• API 598 / EN 12266 PART 1 & 2: Material
•  : ASTM Specifications Carbon Steel, Alloy Steel, Low Temperature carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, any other special material.
•  :  
•  : Trims
•  : Varieties of combinations
•  :  
•  : Operator
•  : Handwheel, Gear, Electrical Motor and Pneumatic Actuator.
•  :  
•  : Note
•  : • RTJ Joints on request. • RTJ Body Bonnet Joints for ratings ≥ 1500 Ibs    (standard)
•  :  
•  : Optional
•  : Electrical & Geared Drive Bypass arrangement, Floor stand
•  :  

Brassomatic Packed Line Globe Valves are equipped with seal caps and nylon gaskets. When inverted the wing type cap may also serve as operating stem with stainless steel spindle and Teflon seating. The globe valves are of back seating types with special Silicon gland packing and can be packed while the plant is in operation. The valves can also be used with standard ‘C’ class steel pipes with suitable adopters.  Sizes: ½” to 1+5/8”  available in forged brass construction Sizes available: (2+1/8)” to (2+5/8)”, (3+1/8)”, (3+5/8)” and (4+1/8)” ODS in special grade Gun metal 

GLOBE VALVES : WESMEC Brand Globe valves offers a comprehensive range of Globe Valves. For the past decades our customers worldwide have trusted us to provide them with consistent and reliable valve products in their most severe and critical service. Forged steel and Casting valves are designed, manufactured and tested to the latest manufacturing specifications. It is widely used in gases, liquids and vacuum operations at high pressure and temperature. They can throttle the flow and they will not leak even in low pressure when they are shut off.   FEATURES: • Available in a variety of end connections. • Available in Bolted bonnet, Screwed Bonnet and Integral Bonnet. • Available in Stainless Steel Spiral wound and Asbestos Graphite gasket for more safety. • Various types of Coating and Plating used to avoid corrosion. • Hydraulic Test Pressure: (BODY) up to 630 Kg/Cm². • Hydraulic Test Pressure: (SEAT) up to 420 Kg/Cm². • Pneumatic Test Pressure: up to 7 Kg/Cm². • Non Destructive Test (NDT) available on request. • Positive Material Identification Test (PMI) available on request.   Standards Followed: • ASME B16.34/B16.10/B16.5/B16.11/B1.20.1/BS 1873/BS 5146/API 598, CE Marking.

We are also the industry leading suppliers of Globe Valves. Our Globe Valves are of superior quality and come in a variety of specifications to meet your requirements. There are different classes of Globe Valves available and they are tough and extremely durable. Our Globe Valves are designed in a variety of classes which offer different features. Class : 150/300/600/900/1500/2500 Standard : ASME Codes VG150BB = Class 150 (PN 20)VG300BB = Class 300 (PN 50)VG600BB = Class 600 (PN 100)VG900BB = Class 900 (PN 150)VG1500BB = Class 1500 (PN 250)VG2500BB = Class 2500 (PN 420) General Feature

• Size: 2” to 6”

Din Standard Globe Valve Design as per DIN 3356 & Din 3230,Size from 2” to 6”, Class PN 40 & PN 64.Din globe valve

we synthesize a wide range of globe valves which includes seal globe valves, gate globe valves and cast iron globe valves. these globe valves are made from the finest quality of metal and raw materials. we hold a state of the art infrastructure, where we have all the latest machineries and tools. all are team is specially trained. we have set our own quality control team. the designs are unique and efficient. it’s been more than a decade that we are consistently serving our clients. with all this we are the paramount cast iron globe valves manufacturer and supplier from india.safecon globe valves are o.s. & y type i.e. outside screw & yoke, bolted bonnet, & rising stem. globe valves are used where throttling and both throttling and shut-off is required. they can also be used for on-off service, but because of high pressure drop, this is generally confined to applications where the valve is normally closed and drop is not important when the valve is open. normally globe valves are installed with flow under the disc, but under certain conditions flow over the disc may have the advantages.safecon can also supply angle valves, “y” type globe valves and globe valves as s.d.nr (screw-down non-return) which in effect converts it into two valves – stop valve when closed or a check valve when open.design features : streamlined shaped body for smooth flow of the working fluid for minimum pressure drop. back seating arrangement permits the replacement of packings while the valve is in full open position   standards applicable : design standard : bs 1873 testing standard : api 598 / bs en 12266 -1 face to face : asme b 16.10 end connection : flanged end : asme b 16.5 butt weld end : asme b 16.25 pressure temperature : asme b 16.34 valve operation :operator : hand wheelsize range : 2" - 10" – class 150, 300 2" - 6" – class 600 2" - 4" – class 900, 1500 operator : gear operatorsize range : 12" & above – class 150, 300 8" & above – class 600 6" & above – class 900 & 1500 material structure : end connection : flanged end raised face, butt weld end, rtj, etc. operation : hand wheel, gear operator, electrical actuator, pneumatic, hydraulic shell : wcb, wc1, wc6, wc9, lcb, lcc, lc3, c5, c12, cf8, cf8m, cf3, cf3m, cf8c, cn7m, cd4mcu, hastalloy, inconel, duplex stainless steel. trim : 13% cr. steel, 304, 304l, 316, 316l, 321, 347, monel, duplex stainless steel.

• Material: PP-R and Copper
• Color: White, Grey, Green
• Series: SDR6/S2.5
• Pressure Grade: PN2.5

Technical Data Valve Designed to BS - 1873 Valve Tested toAPI - 598 Flanged Ends as per ANSI -B- 16.5 Face to Face as per ANSI -B- 16.10 Accessories Geared Actuators Electric Actuators Floor Columns By-Pass Piping Notes Optional Stellited Plug & Seat

  CAST STEEL GLOBE VALVE (PRESSURE SEAL BONNET)   “VALTECH” robust design, Cast Steel Pressure Seal Globe Valves are designed and manufactured with reference to Standard BS-1873 for Pipelines 50NB and above. They are available in Flanged and Buttweld ends. Hard Faced Trim material ensures perfect Sealing and longer life. Lapped Back Seat is provided to ensure re-packing/replacing of Gland Packing in stream, when the Valve is in full open condition which ensures maximum safety, convenience and economy. If required, Valves can be offered under any THIRD PARTY INSPECTION . “VALTECH” Cast Steel Pressure Seal Globe Valves are available in various materials like Cast Carbon Steel conforming to ASTM-A-216 Gr. WCB, Cast Alloy Steel like ASTM-A-217 Gr. WC-6 / WC-9; and Cast Stainless Steel like ASTM-A-351 Gr. CF-8, CF-3, CF-8M & CF-3M. Size range starts from 50 NB through 300NB and pressure rating from 900# to 2500#.

• Part: Material
• Cap: Steel Plated
• Gland Nut: Extruded Brass
• Gland Packing: Asbestos Free
• Gland Packing: Neoprene
• Gland washer: Brass
• Cap Packing: Neoprene
• Bolt: Steel Plated
• Bonnet: Forged Brass (BS-218)
• Spindle: SS 304
• Seat: Teflon (PTFE)
• Seat Retainer: Extruded brass
• Spindle Nut: Steel
• Body Packing: ‘O’ Ring Neoprene
• Body: Forged Brass BS-218

Y & Globe Type Flush Bottom Valve, Double Window Sight Glasses

Y Strainer Valve, Slab Type Gate Valve, Mini Ball Valve, Testing Services

Ball Float Steam Trap, Thermodynamic Steam Trap, Ball Float Valves

Globe Control Valves, Solenoid operated valves, fertilizer plant

High Pressure Globe Valve, Reflux Valve, Carbon Steel Gate Valves

Forged Bellows Sealed Gate Valves, Bellows sealed Cryogenic Valves

Y Strainer Valve, Welding Electrodes, Oil Lubricant, Valve, Foot Valve

Globe Valves, Ball Valves, Direct Mounted Winflow 3 Way Valve Manifold