Granulator Dealers in Midc, Mumbai

• Features: Homogeneous binder distribution.Short batch time, reduces cleaning time.Option of maximize CIP effectiveness.Varying capacity ranging from 10 liters to 1200 Liters.
• Dry Mixing approx: 3 – 5 Mins
• Wet Mixing approx: 5 – 10 Mins
• Wet Granulation approx: 5 – 10 Mins
• Discharge approx: 1-15 Mins

FEATURESOscillating Granulator, plays an important part in the process of granulation in tablet making as quality of tablet is determined by the virtue of the granules used for its compression. Oscillating granulator can be used for wet and dry aspect of the granulation processQuality of granules are better compared to other processing machineries like multi mill, comminuting mill etc.All contact parts are in stain steel Mounted on a baseAdjustment, cleaning and operation are simpleSturdy, durable, better productivityUnique oscillatory rotor action ensures high outputs and a predictable product with minimum of fines

• Condition: New
• Port: Nhava Sheva Mumbai
• Supply Ability: 10 Piece/Pieces per Month
• Product Type: Tablets
• Packaging Details: Export Quality Packaging

Granulation: Mechanical process in which the product is pressed through a sieve with a specially shaped rotor-arm to obtain a desired particle size.  This process results in a narrow distribution spectrum as only the product having the right shape, size & position is broken & passed through the sieve Features :  ·         Robust, Simple & Compact design. ·         Stainless Steel Construction. ·         Easy Installation in Production Line. ·         Oscillating Rotor Motion. ·         High Output. ·         Uniform Granules, Less Fines ·         Low noise level as per international norms. ·         Maintenance Free ·         Easy for Cleaning.    Oscillating Rotor : The oscillating motion of the rotor improves the granulating process. This sensitive handling of the product emulates the hand operation of  an experienced pharmacist. One important feature of the oscillating granulator is the continuous variation of the speed & force applied to the material.  The back & forth motion of the  rotor results in an even distribution of the material.   Complete Stainless Steel.  All parts in contact with the product in AISI316 / 316L Inside polished Ra = 0.8 micron, outside ground (grain220)  Maintenance free design, GMP execution.

Oscillationg Granulator are available in various sizes, the most common size in 488mm width 510mm length, available from 0.5mm to 25mm holw diameter perforation the size below 0.5mm can be had in wire mesh design. These are availabe complete set of Certificates.

The High Shear Mixer Granulator in India provides a highly versatile machine suitable for dry mixing and wet granulation in the same bowl and in short time cycle. The complete operation is done within 10-30 minutes. The entire operation is performed in a closed dust free environment and the complete operation is automatic, including the discharge. The main assembly consists of a main mixing bowl made out of S.S. 316 quality, highly polished to give a mirror non-stick finish.The bowl is provided with two impellers, the main mixing impeller is mounted vertically with a horizontal rotation and the chopper blade is mounted on the side and rotates in the vertical axis. The main mixing assembly is provided with four blades, two for mixing and two for pushing the material upwards. The complete assembly is mounted on a suitable bearing housing provided beneath the bowl with specially designed seal and air purging arrangement. The complete assembly is coupled to a suitable gear box and motor through a belt assembly. The mixing blade is provided with a dual speed motor for two sets of mixing RPMs and can optionally be provided with VFD for variable frequency. The High Shear Mixer Granulator in India provides chopper blade is a high speed blade with provided with specially designed blades to break the lumps into smaller granules with a short cycle time. The assembly is provided with a suitable bearing housing directly coupled to a suitable motor. The chopper rotation as a standard is at high speed can optionally be provided with VFD for speed variation. The top of the bowl is a dish-end provided with mechanically balanced loads for assisting in opening and closing the top lid. It is provided with standard parts for charging, view and air vent parts. The top can optionally be provided with pneumatic lifting arrangement in place of the mechanical loads. The discharge is provided with a pneumatically operated valve for complete and automatic discharge at the end of the cycle. The valve is provided with suitable 'O' rings for leak proof operation. The complete structure is mounted on a sturdy platform duty cladded with S.S. Dimpled sheets, provided with a stair case with railings. The sides of the platform are cladded with S.S. 304 sheets and mirror polished as per GMP standards. An electrical panel of S.S. With the contactors, relays. Timers on -off push buttons for the main motor, on-off push button for the chopper motor, pneumatic open – close for the discharge valve etc. on the platform for ease in operation. The machine can optionally be provided PLC for fully automatic operation and data logging. ranulation Line :- Rapid Mixer Granulator is a highly versatile machine suitable for dry mixing and wet granulation in the same bowl and in short time cycle. chopper blade is a high speed blade with provided with specially designed blades to break the lumps into smaller granules with a short cycle time. Salient Features: Specially designed bowl ensures constant flow of processing material thereby reducing the process time to have a short batch cycle time. Specially designed mixing blades and the chopper blades gives a uniform and homogenous product of even particle size without lumps. Pneumatic discharge ensures quick and complete discharge of the material fro the container. Charging port provided for charging material during processing. Totally enclosed system and filter bag for the top vent gives a completely dust free environment. All mechanical and electrical components are in assembled condition ready for operation. Dual speed for the main motor depending on the product to be mixe. Various interlocks provided for safety.

MEVISH’s Rapid Mixer Granulators operates at a low cost coupled with high productivity and is designed in a manner to achieve perfect mixing & consistent granules.   MEVISHs Rapid Mixer Granulators Excellent mixing & close control over the size of granules leads to faster speed in tableting along with superior quality and minimal rejections. MEVISH’s Rapid Mixer Granulators meets special needs of tablet manufacturing technology by reducing processing time, homogenous mixing, uniformity of size and above all maintaining improved hygiene compliant to GMP norm MEVISH’s Rapid Mixer Granulator Machine consists of various parts ie. Mixing Bowl, Mixing Blades, Granulator, Pneumatic Discharge, Motor, Gear Box, Operating Panel and the Control Panel. SALIENT FEATURES : • Capacity 25 Ltrs to 1000 Ltrs • Dual Speed Impeller And Chopper • Suitable For Efficient & Fast Mixing Of Granulation Of Ingredients • Material Handling System Is Provided For Loading Of Material • CIP System Will Be Provided With Pump As Optional • M.O.C. S.S. 304/316/316L •Consistant Quality In Each Batch • Fully Hygienic Mixing. • Option - Arrangement For Binding Spray. • Machine With PLC System As An Optional • CGMP Model With Documentation (IQ, DQ, PQ, OQ) - As Option

wet granulator, V Blender, single punch tablet press

This machine gives high output with less percentage of fines and has the salient features like Robust Simple and Compact design, Easy installation in production line, Uniform granules, Maintenance free and can be attached with Vacuum loading and discharge arrangement or Gravity flow system. The granulating chamber and internal parts are totally washable from inside. The inner surfaces are mirror polished to prevent adherence of the product and facilitate cleaning. Sliding rails and fast fixing devices allow easy mounting and dismantling of the accessories.

• Condition: New
• Warranty: 1 Year
• Dry Mixing approx: 3 - 5 Mins
• Wet Mixing approx: 5 - 10 Mins
• Wet Granulation approx: 5 - 10 Mins
• Discharge approx: 1-15 Mins

DescriptionMachine will be complete with Mixing Bowl, Mixing Blades, Granulator, Pneumatic Discharge, Motor, Gear Box, Operating Panel and the Control Panel.Mixing BowlThe Mixing Bowl is cylindrical with a large diameter and flat base. The Top portion of the bowl is conical in shape to assist circulation of cohesive powders. The Bowl is fabricated from S.S. 316 Quality Stainless Steel with all internal and external surfaces polished to mirror finish.Top LidPneumatically Openable (except RMG 50 & 100LTRS) type lid consists of charging hole, air filter and special type silicon gasket.Mixing BladeMixing blade consisting of two Nos. full and two Nos. half blades specially designed for intense mixing. The angles of the blades are such that half blades lift the material and full blade pushes the material. Continuous action of this with the different ingredient immensely mixes thoroughly with homogeneously. Mixing blade assembly is mounted on main shaft with separate bearing housing which fully eliminate any chance of cross contamination of product with any lubricants. The upper portion of the housing contains specially designed Teflon seal along with air purging facility. Lower stage housing contains bearing alongwith oil seals that make it completely leak proof.Bearing HousingThe bearing housing of the main shaft connected to gearbox by means of heavy-duty chain coupling. Chopper blade assembly consists of a separate baring housing coupled to motor by means of flexible coupling, with Teflon impregnated gland packing and air seals.Granulating BladeA high speed Granulator is inserted horizontally through the wall of the bowl to assist blending of powder and to break the lumps of the products in to granules of required sizes. These lumps are formed while wet mixing.Discharge ValveMachine has a side discharge outlet with pneumatically operated. The discharge valve is exactly matching the profile of the intervene bowl with perfect sealing arrangement. Pneumatic cylinder housing is specially designed with swivel type arrangement, which helps for easy cleaning. Safety interlocks are provided to discharge valve as well as top lid with limit switches.Machine BaseRigid Machine base frame made from M.S. Square pipe is designed to accommodate the mixing bowl and the control panel. The motor V belt drive and reduction gear are also housed in the frame. The machine base is totally enclosed and removable flush type S.S give access to motor gearbox and belt drive inside and machine base. Removable S.S. Cover finished mirroring finish on all side of the machine base frame. Inside of the M.S. base frame duly epoxy painted to avoid any rusting. The bottom of the base frame duly covered with M.S. Sheet. So that any oil or dust from belt should not fall on the floor.Electric Control PanelAll the main Circuit like Switchgears, Relays, and MCBs etc. will be contained in a S.S. Panel box and kept in Non Flame Proof area.Process TimerSAMS make Process Unit with programmable digital timer, auto mode indicating lapsed/balance time etc.Operating PanelAn Operating Panel mounted near the mixing bowl for the easy operation in the case of NON FLP MOTOR. In FLP only Flame Proof Operating unit provided near the Bowl with auto manual switch, Emergency stop and push buttons for main motor, chopper motor Discharge valve open and close, ammeter for main motor and chopper motor.Pneumatics SystemsThe machine is supplied with duly required pneumatic systems of FESTO/CAMOZZI Make. The customer has to ensure, supply of oil free compressed air, also free from any other possible impurity, which may contaminate the product. Air filter and Air water separator are also provided with the machine. Pressure regulator is provided to regulate the desired air pressure. The systems is suitable to accept an Input air pressure of 7kg/cm2 to be terminated at ½" " BSP" terminal. Air lubricator is provided to lubricate solenoid valves and pneumatic cylinders is incorporated in the system.Pressure SwitchA Pressure Switch is incorporated in the Pneumatic circuit to ensure that unless required minim air pressure is available in the system the machine cannot be started. And once the machine starts and if drop below pre-set the value the machine stops immediately. In case the Flame Proof Machine the pressure Switch is fitted in main panel. All M.S. parts will be cladded with SS 304Q sheet and all SS parts will be polished to smooth surface. Rmg Improved Processing Uniform distribution of all formulation ingredients. Short mixing and granulation time. Useful working capacity of upto 80% to 40% of bowl volume. Uniform granules by gentle processing. Wide range of applications. Easy scale up & Scale down between machine sizes. Bowl shape design to have no dead spaces. Riddhi Mixer Granulator's can be offered in 10Ltrs. R&D & 25Ltr. / 50Ltr. For R&D or pilot plants. The process parameters derived in the Lab/Pilot scaled up into production machines. These machines can also be offered with PLC'S.

activated carbon granular, CAUSTIC SODA FLAKES TDS, Methanol

We are offering rapid mixer granulator.

Packing: 50 kg. net in laminated P.P. bags with liner inside. Uses: 1) Fused products (glass, glass fibre ceramics, frits, glazed, porcelain enamels) 2) As fluxes and metallurgical operation (welding and 3) Brazing steel industry (paste fluxes, soldering fluxes) 4) Boron Chemicals (boron salts, boron trifluoride, boron phosphates, boron fluo-borates, borate ester, ferro-boron and others) 5) Catalysts (cyclohexane oxidation, hydrocarbon oxidation) 6) Nuclear applications, nuclear power plants,

The main assembly consists of a main mixing bowl made out of S.S. 316 quality, highly polished to give a mirror non-stick finish. The bowl is provided with two impellers, the main mixing impeller is mounted vertically with a horizontal rotation and the chopper blade is mounted on the side and rotates in the vertical axis. The main mixing assembly is provided with four blades, two for mixing and two for pushing the material upwards. The complete assembly is mounted on a suitable bearing housing provided beneath the bowl with specially designed seal and air purging arrangement. The complete assembly is coupled to a suitable gear box and motor through a belt assembly. The mixing blade is provided with a dual speed motor for two sets of mixing RPMs and can optionally be provided with VFD for variable frequency. The High Shear Mixer Granulator in India provides chopper blade is a high speed blade with provided with specially designed blades to break the lumps into smaller granules with a short cycle time. The assembly is provided with a suitable bearing housing directly coupled to a suitable motor. The chopper rotation as a standard is at high speed can optionally be provided with VFD for speed variation.

Based in Pune, Maharashtra, we are primarily engaged in the exporting and supplying of the Plastic Scrap Granulators of high quality, across the globe. Used for grinding plastic scraps, these Heavy Duty Scrap Grinders assure smooth performance.

• Features: Easy installation, maintenance and long service life.

The rotating sieve mill guarantees optimum sizing results plus excellent flow rates. The 360-degree rotor movement ensures constant, uniform speed and force effect for gentle sizing of the product.The advantage of this process resides in an exceptionally low fine particle fraction in the end product, as well, the low mechanical stress allows for the capability of processing heat sensitive products.

Most suitable for dry granulation provided with hexagonal rotor having oscillating movements.1 No. Stainless Steel sieve is supplied with machine that can be changed to any desired mesh by quick opening and locking arrangement.

• Net Wet: 160 kg
• capacity: 400

Rapidmixer and wet granulator is a very precision machine performing dry mixing and wet granulation in the same bowl only in 6-12 minutes. The entire operation is fully automatic including the discharge. All parts coming in contact with the material to be mixed are made of stainless steel and are highly polished. Drive motors and elecrtic control gear mounted on the machine can be flame proof. In such case separate control pane will be located in a low risk area. The machine is available in 10 different sizes from 10 litres to 1200 litres. Select the size of the machine according to your batch size. For 400 lts capacity model vessel overflow capacity level is 400 lts, working volume is 80% of 400 lts = 320 lts. Assuming the bulk density at 0.5, one can take a batch of 160 kg of wet mass. in a 400 lts capacity model.

Granulator, Blender, capsule making machine, Filter, Mixer, Ointment Plant