Grinding Machine Dealers in Fort, Mumbai

A useful tool for light grinding and cutting jobs with grinding wheel capacity of 4" or 5".Weight less than 2 kgs

The Universal Tool & Cutter Grinder is a robust machine capable of dealing with a wide range of tool & cutter Grinder operations. It is available as a steel cabinet mounted, machine and is designed for the rapid sharpening of H.S.S. milling cutters, spiral mills, metal slitting saws side and face cutters reamers, tap and with suitable attachments lathe tools, end mills formed cutters etc.A totally enclosed wheel head motor with a double ended spindle carriers one standard and one extended wheel adaptor which can be mounted on either end and will receive both the Cup and dish wheels supplied with the machine. The spindle, with runs at 2800 r.p.m. is controlled by reversing switch built into the main body of the machine. The wheel head is mounted on an engraved base plate which can swivel through 360D and can be clamped in any position. It is supported by a cast iron column having vertical adjustment, by means of a hand-wheel at the base of the machine. The column can be looked in any position and movement can be accurately controlled by means of a friction mounted micrometer dial. The upper work table is provided with the slot which not only serves as means of fixing the tooth rest etc. but also enables accurate location of the loose centre heads. It is graduated either side of the Zero setting and can swivel through 180D Provision is also made for taper setting in INCHES per FOOT. Longitudinal movement of the table is obtained from a rack pinion operated by a conveniently placed Handle or, if required, can be operated by hand pressure only. The table is located on accurately machined vee and flat ways and is fitted with adjustable stops which can limit he movement of the table in and position. Cross traverse is accurately controlled by a hand wheel situated at the front of the machine which is fitted with a friction mounted micrometer dial.   STANDARD EQUIPMENTS Universal Work Head Indexing Tooth Rest Set of Centre Heads Hilder for Diamond Dresser Reversing Switch 3 dia. Electric Motor   TOOL KIT Panel Lock Key L-Keys 5/32" & 3/16" Adaptor Puller Pressure Oil Can Double Ended Spanner Adaptor Nut Box Spanner Cup Shaped Grinding Wheel 4" x 2", 1" Bore Dish Shaped Grinding Wheel 6" x 1/2", 1" Bore   STANDARD EQUIPMENTS Hob Grinding Attachment Drill Grinding Attachment Radius Grinding Attachment Chaser Grinding Attachment Tap Lead Grinding Attachment

GRINDING MACHINE Is fitted with four grinding wheels of different shapes & special attachments to sharpen & grinding the dies & cutters of the machine. One 2800 R.p.m. motor is fitted in it.

• Weight: 600 Kg
• Spindle speeds: 2800 RPM

• Center Height: 135
• Work Head Motor: 0.37 kW

Hydraulic table traverse with infinitely variable speed range, Work head swivel of ±90º with rapid approach for easy operation, The slides are coated with “Turcite-B” linear bearing material to give stick slip free movements, reduce vibration and improve repetitive positioning accuracy, Hand-operated lubrications pump for sufficient lubrication of Slides.

• Type: Surface Grinding Machine
• After-Sales Service Provided: Overseas third-party support available
• Brand Name: MASTER
• Condition: New
• Place of Origin: Maharashtra, India
• Port: Mumbai

The most value added ATM series grinding machines for all wire sizes. The ATM Series Grinders are precise, reliable, very fast & are designed to last a long time. These Grinder’s are exceptionally strong with strength built in to handle the vibrations caused due to grinding. The New user interfaces makes the grinding of compression springs very simple and easy. The Grinder’s are equipped with very advanced software that have incorporated features to do grinding at very high speed and with complete precision.

Conventional CNC Machines High Rigidity & Ultra-Precision Sturdy Construction Sensitive Axes Movements for Precision Cambering Facility

• Shipping Volume: 0.25 m3
• Shipping Dimensions: 760 x 510 x 590 mm

Slides with Set-in springs for rigidity, Common drive with one motor to the grinding wheel, valve spindle and coolant pumpM Gives mirror finish to valves without jitter marks,Five Collets (4.50 mm, 5 - 6 mm, 6 - 10 mm, 10 - 14 mm, 14 - 17 mm), Grinding Wheels, Diamond Dresser and C Spanner.

CENTRELESS GRINDER

We offer heavy duty double ended bench and pedestal grinders for industrial use are available in various capacities from 0.25hp to 3.0 hp in wheel size from 100mm upto 400mm in diameter. the machine is fitted with superior quality stamping and die cast rotors, which are dynamically balanced. This helps in minimising vibrations and smooth running is achieved. These robust machines are provided with two grinding wheels and adjustable tool rests. Eye shields for operators safety are also provided. we also offer the following as optional extra accessory: a. motorized coolant pump, tank, tray and fittings. b. water pot and machine lamp. c. heavy duty adjustable work table in lieu of standard tool rests. d. Machines of different voltage and different frequency can be supplied against specific orders we also offer abrasive belt grinders and flexible shaft grinders. kindly ask for more details.

Internal Grinding Machine, Cylindrical Grinding Machine

is one of the terminal pin processing equipments. It is used to groove the ends of terminal pin.   Functions : Stepless motor controls the speed.   Main Technical Parameters 1. Power supply: Triphase 380V 50Hz 2. Rated power:750W 3. Applicable diameter:Φ1.5mm - Φ3.0mm ( It can be custom-made) 4. Applicable length: 40mm - 140mm ( It can be custom-made) 5. Efficiency: 60000-70000pcs/8h 6. Size (L * W * H) : 810*680*1140 (mm) 7. Weight: 21Okg     Tube Rolling Machine TL

crankshaft grinders, friction screw presses, Crankshafts, Forging Hammer

ring granulators, level luffing cranes, stacker reclaimers, Wagon Tippler

HIGH EFFICIENT DUST COLLECTOR SYSTEM BY HEAVY SUCTION OF BLOWER 5 MICRON FILLTER BAG FOR HIGH RATE OF RECOVERY � H.P PEDSTAL MOTOR OF 2800RPM WITH 7� LONG GRINDING SPINDLE & WHILE. HIGHLY SEALED ACRYLIC HOOD WITH LIGHT FIXTURE.

Pick from our wide range of cylindrical grinders. Each model is different to suit individual production need. For higher productivity and greater profit, it is essential you pick a machine suitable for you. WorkheadThe work head spindle is made of nickel chrome EN-24 hardened and ground. It runs in gunmetal bush bearings. The drive to the workhead spindle which has MT-3, is by a step ‘V’ pulley. The speed obtained through this pulley can be reduced by another bigger size pulley provided in the workhead housing. The workhead is built for grinding operation both with stationary centre and revolving spindle. Oil holes are provided for lubrication. WheelheadThe rigid wheelhead spindle is made of nickel chrome steel EN-24 hardened and ground. It runs in white metal adjustable type bush bearings. The drive to the wheelhead is transmitted by two V-belts. Automatic wheelhead traverse in cross direction is on precision hand-scrapped ‘V’ and flat guide ways, and is hydro-mechanical type. The spindle is tapered (5o) at the front to receive the wheel flange. Oil holes are provided for lubrication of the bearing surfaces. Rapid approach is available in U-127 series and it is up to 40 mm. Tailstock The tailstock travels smoothly all along the length of table right upto the workhead.  Hydraulic/Electrical System All standard equipments are used in both system. Swivel Table Table is arranged to swivel for taper grinding. For fine connections to be applied by the screw adjustment. nternal Grinding Attachment The hinged type Internal Grinding Attachment with its independent motor is conveniently located on the wheelhead. It has fast grinding action and it can be quickly swung into a grinding position. The work piece can be externally and internally ground in one setting. Taper hole can be ground by swivelling either workhead or table. There are so many standard and special accessories that can be added to the machine as per 

• Brand Name: Empero
• Power: 380 V 1/1.7 KW 690/1400 D/Dk
• Cap: 20 (L)G.W:54 kg Package.
• Model: SD.07

crankshaft grinder, Crankshaft, Cylinder Boring Machine, Industrial Bolts

crankshaft grinder, Lathe Machine, workshop sheet metal, Wood Working

Machine designed exclusively for open circuit systems. Doesn’t call any recycle crushing Access doors for easy maintenance and removal of tramp iron Easy material size adjustment Relatively low maintenance due to its working in both directions Accurate and sized product output Suitable for dry and low moisture application Moderate crushing ratios up to 15:1

• Voltage: 220-240V
• Net Weight: 1.8kg
• Rated Input Power: 950W
• Rated frequency: 50Hz
• Wheel diameter: 100mm
• No speed load: 11000 rpm
• Angle Grinder 4" 950 W: Orange
• 2167: 1

For cutting and grinding in metal fabrication & stone industry. Virgin Plastic Material

We offer terminal pin grinding machine. Main technical parameters 1. Power supply: triphase 380v 50hz 2. Rated power:750w 3. Applicable diameter:φ1.5mm - φ3.0mm ( it can be custom-made) 4. Applicable length: 40mm - 140mm ( it can be custom-made) 5. Efficiency: 60000-70000pcs8h 6. Size (l * w * h) : 810*680*1140 (mm) 7. Weight: 21okg

Grinding Machine, Fasteners, Machine Tools

Internal Face Grinding Machine, Semi Hot Chamber Die Casting Machine

cnc cylindrical grinding machines, turret lathe, Horizontal Machining Center

Grinding Machine, CNC Machines, Drilling Machine, Lathe Machine

Jig Grinder, Bevel Edge Square, Swing Machine Clamp, Lever Chuck

centerless grinder, Stud Type Welding Machine, Magnetic Drill Machine

Centreless Grinding Machine, control switches, pirn winding machine