Ground & Phase Protection Relay Dealers in Mumbai

Consists of a transmitter and a receiver Used to detect or trace conductors and to find short faults in them. The signal generated by the transmitter is made to a modulated current, generating an electromagnetic field around a conductor. This electro magnetic field induces a voltage within the receiving coil. The induced voltage is amplified, decoded and converted to the original signal by the received and finally displayed on screen. It is used for finding  conductors  in  walls, conductor interruptions, short-circuits in conductors Conductor tracing in the soil Detecting fuses and assigning current circuits Tracing sockets and distribution sockets having accidentally been covered by plastering Detecting interruptions and short-circuits in floor heating Tracing metallic water and heating piping All application areas (both,voltage-free and live) are performed without usin any additional instruments Transmitter display indicates the transmission level,the transmission code, as well as the foreign voltage Receiver display indicates the reception level,the transmission code,as well as the mains voltage detection Automatic and manual sensitivity adjustment Acoustic reception signal may be switched off Auto-Power-Off function Backlight Additional lighting function when working under bad lighting conditions Additional transmitters are available to extend or distinguish several signals

• Color: Grey
• Condition: New
• Power Source: Battery
• Automation Grade: Automatic
• Feature: Easy To Use
• Operating Temperature: High Temperature
• Type: Underground Cable Fault Locator
• Warranty: 5years
• Country of Origin: India

We are pioneers in the manufacturing since 2011 and only one to offer unprecedented warranty of 5 years on our products    A) Underground Live Cable Locator, Pacetrace P700  a) It is the most simplest ever, b) It is the ONLY ONE to have a penetration of 5 metres of underground depth c) Without any fancy and hence complicated features like transmitter and receiver for which we have to find the starting  point of the cable(which is not possible to find generally) to transmit and receive the signal. d) The decibel of the buzz depends upon the magnitude of current. More the current, shriller is the buzz. e) Unlike the above you can start detecting the cable from any point in the middle of the road. You need not search for the  starting point. Just walk with the Locator ON moving right and left; if you hear the beep, the cable lies just under the sensor.  Is it not simple? It is as easy as walk in the park. Easy to operate and easier to maintain. It has zero maintenance! It can map underground cable network in factory premises without any excavation; which will be useful for laying new  cable underground safely in future.  

• Country of Origin: India
• Color: Blue
• Condition: New
• Current Type: DC
• Mounting Type: Base Mounting
• Power Consumption: 2W-5W

Offered By Us is dc Earth Leakage Relay that Works By Measuring Differential Current Between Both the –ve and +ve Current Carrying Conductors. the Dc Earth Leakage Relay Provided By Us is Supplied to Far Flung Areas of the World Through the Wide Spread Network of the Company. used For localizing and Detecting Earth Leakages in Dc Power Systems specifications sensor: back Panel Mountable with An Opening Provided for Passing the -ve and +ve Conductors Through. Size of Opening is 50 Mm Dia (smaller Dia Sensors are also Available )detectorsensing Range : + - 5 1020 Ma Selectable By Shorting Terminals On the Unit indication : +ve Leak, -ve Leaktime Delay : 10 Seconds for Turn On and Turn Offauxiliary Supply : 20 to 80 V, or 80 to 300 V Acdctrip Output : 1 Changeover Contact On Leakage Exceeding Set Valuecontact Rating 5 a 230v Ac 30 V Dcreset : auto or Manual Selectable By Shorting Terminals On the Unitmanual “reset “ Button Provided On the Unit dimensionssensor : 113mm X 30mm X 105mm ( 50mm Opening ), 87.5mm X 26mm X 81mm (20 Mm Opening )detector Unit : 70 Mm X 100 Mm X 110 Mmaccessories : cable Between Detector and Sensor of 2 Metre Length

Underground power cable fault locator suitable to locate U/G power cable faults form 440 volts to 400KV. Cable fault locator (Surge generator) has been primarily designed to produce high voltage surges for pre-location of under ground power cable fault in combination with Reflectometer T-510. 

We are offering cable fault locator we have great pleasure to inform to you, we provide complete set of equipments in the field of cable laying projects. Along with the same, as we discussed, we also deal in fault detection for u/g & o/h lines with pre warning facilities on the live line before the actual fault occurs & various testing equipments for electrical parameters on hv transformers, cables, ct, pt, gis, etc. Van mounted with all in one set of equipments.

Details : 10 Amps to 40 Amps capacity (2KW to 8KW). Single phase version. Auto / Manual operation. Accepts (4-20)mA/(0-5)VDC/(0-10)VDC/Pot or DC pulse as the control signal. Simple and Modular design for easy installation. Suitable for both inductive and resistive heating loads. Finds application in single phase Air heaters in AHU / HVAC. Compatible with Industrial BMS controllers/DDC/PID/PLC.

• Protective relays: Earth leakage relays

Size: (mm)- 22.5mm width op contacts-1 co aux supply-90-270v acdc mounting-din channel mounting distinctive feature-micro controller based design automanual reset + normal failsafe modes.

• Display Type: LCD
• External Voltage Detection Range: 12 to 400 V
• Frequency Range: 0 to 60 Hz
• Output Signal Frequency : 125 kHz
• Current Consumption: Max. 18 mA
• Power Supply: 9 V battery, NEDA 1604, IE6F22
• Model Name/Number: CFL-01
• Brand: Metravi

• Feature: Small size, light weight and ABS plastic housing which is ergronomically designed for easy use by user,Menu driven simple operation,Measurement maximum 8 km in selectable ranges, Tests any type of copper telecom and signal cables,Range, VOP and Gain are s
• • Display Readout: Color LCD -480*280·
• • Continued operating time: 8 hours
• • Charging time: 3 hours
• • Power Supply: 7.4V Rechargeable Li-ion battery. Charging voltage 230V +/-10%, 50Hz, single phase.
• • Storage Temperature: -15°C
• • Working Temperature: -15°C
• • Dimension: 212 (L) × 170 (W) × 90 (H) mm (approx.)
• • Weight: 1.20 Kg Net (approx.)

• Used to: find the point where metal is touching the ground (shield is rusted/rubber buffer is broken) and power is leaking, creating noise on a cable.
• Current Frequency: 8 kHz
• Display: 1.28 in, 128 x 128 BW outdoor LCD display with auto backlight
• Features: Adjustable volume control, Works in conjunction with the UAT-600-T Transmitter.

FIELD FAILURE RELAY also known as FIELD LOSS RELAY protects the DC Shunt wound motor or main circuit, under open Field conditions or in the absence of the field supply. Field failure relays traders, dealers, exporters, suppliers and manufacturers in Mumbai Maharashtra India to all over the world from 1970 according to ISO standards and client's requirements

• Size: 110 x 158 mm
• Weight: 2.5 Kg

Earth fault relay Two stages over current and two stage Earth fault protection Relay, Latest 999 fault events with 1 ms time stamp resolution, Hardware and software self-diagnosis, NDR controlled earth fault protection,1 or 2 or 4 setting groups – auto or manual selection

• Frequency: 50/60 Hz
• Power Source: Batteries
• Operating Temperature: 50 Deg C
• IP Rating: IP65
• Length: 9 Inch
• Current: 500 mA
• Voltage: 250 Volts AC
• Automotive Charger: 24V DC
• Weight: 1.8 kg

• Application: Telecom,CATV And Networking
• Power: 10 MW
• Model Name/Number: VFL 10
• Material: Aluminium
• Size/Dimension: 15 cm
• Weight: Upto 100 Gm

Relay MPR300 is a three-phase LT motor protection relay for motor sizes up to 50KW (max. 88 A current). It is a low cost solution, offering five major protections for motors widely used in fans, pumps, crushers, mills, compressors, belt conveyors, centrifuges, mixers, ventilators, escalators, motorized valves etc. Major advantage is that it provides EF co-ordination in contactor-started motors, thus offering greater security, operator safety and economy. The relay is micro controller based, highly user friendly and compact with inbuilt CTs. The relay can also be used for protection of larger motors by using external CTs. medium voltage and high voltage sub-stations.

• Voltage: 200 - 480VAC
• Frequency: 50 Hz
• Number of Poles: 3 Pole
• Brand Name: Omron
• Color: Black
• Current: 5A
• Usage/Application: Industrial
• Model Name/Number: K8DS-PH1L
• Coil Type: Latching
• Type: Phase Sequence
• Contact Form: SPDT

Earth leakage current give rise to temperature and progressive failure of insulation which leads to operating flash over. It is essential to detect earth leakage current well before they cross threshold limits and isolate the circuit. SYCON 770X Earth leakage Relay continuously detects the leakage current with the help of CBCT (Core Balance Current Transformer.) The CBCT is mounted externally. The current carrying cables (it may be 3 phase supply or 1 phase supply) are passed through the CBCT. CBCT detects the level of current and trip the device at set current & time.

• Feature: z Three phase voltage supervision in deltaconnection,z Current measurement in phase L1 etc.

The field failure relay MRQ1protects synchronous generators against operation outside the stable operation area due to loss of excitation. When partial or complete loss of excitation occurs on a synchronous machine, reactive power flows from the system into the machine and the apparent impedance as viewed from the machine terminals goes into the negative X region in the R-X diagram.

One Piece Cable Fault Locator from VON CORPORATION, USA using Arc Reflection Method - 240V AC Model,25kV Fault LocatorSectionalizer. Simple operation, On, Radar, Start and unit gives distance to the fault. 1563 joules at both 12.5kV and 25kV. Radar Auto-ranges and Auto-Locates the fault. 1563 joule "dual thump capacitor" provides full energy at 12.5kV and 25kV. 15 Second thump interval.

The NIPPEN ELR(Earth Leakage Relay) model has a high performance microcontroller based 3 digit, 7 segments bright LED display. NIPPEN'S ELR detects leakage current well before it crosses threshold limits and isolates the supply instantly with help of a MCCB/ACB/OCB/Contactor.   Features Digital display in both DIN RAIL (ELR DIN35) and Panel Models (ELR 96) Monitors true RMS earth fault currents Bar Graph to indicate leakage current as a percentage Test and Reset function CBCT open circuit detection

• Brand Name: SELEC
• Type: Earth Leakage Relay
• Country of Origin: Made in India
• Model Name/Number: 900ELR-2
• Display: 3 Digits Liquid Crystal Display With Backlight.
• Supply Voltage: 230V AC
• Trip Setting: 30mA to 30A
• Measuring Parameter: Leakage Current Monitoring

• Condition: New
• Angle of Visibility: 360 Degree flashing insight
• Applicable Voltage Range: 7kV - 13 kV
• Applicable Current Range: Up to 600A
• Applicable Power Frequency Range: 50Hz +- 5 %
• Fault Flashing Interval: 5s
• Duration of Flashing: 50ms
• Sensitivity and accuracy: (0 - 100)A +-3A, (100 - 600)A +-3%
• Static Power Consumption: Less than 20uA
• Auto Reset Time: (1 - 48)h - User-selectable
• Resetting Facility: Self reset / Manual / Remote
• Identification of Fault Current Duration: (20 - 40) ms
• MTBF: Greater than 70000h
• Impulse Current With Stand: 31.5kA for 2s
• Degree of Protection: IP67
• Weight: less than 500g, 5kg approx
• Outline Dimension: (75 x 115)mm approx - cylindrical, (355 x 293 x 255)mm

In an ever more regulated industry, the next generation of Radiodetection Cable Avoidance Tools, C.A.T4™ and Genny4™, build on over 30 years of Cable Avoidance expertise to enable operators to find more buried utilities, faster. These two innovative tools have been engineered to deliver a step change in capabilities with minimal change in work practices and training requirements. The C.A.T4 and Genny4 range is designed to assist in avoiding buried cables and pipes during excavation, reducing the risk of injury to personnel and damage to utilities. The C.A.T4 is designed to detect signals – whether generated by the Genny4, inherently radiating from metallic services, or from the complimentary range of Sondes (Mice) and accessories designed to enable the location of non-conductive services. C.A.T4 and Genny4 is Radiodetection’s most advanced Cable Avoidance system to date, designed to deliver optimal performance, higher levels of safety, advanced features and at competitive cost of ownership

ELMEASURE MODEL NOS. : IELR – CBCT[60,100,150] , IELR-CBCT[200,250,300   Salient Features : • Inverse curve - Trip time to leakage current • Field programmable trip current and trip time through front panel keys with password protection • Continuous leakage current display (Programmable) • Continuous Display of Trip Leakage current (Programmable)   • Continuous scrolling display for set Current and set Time   Applications : • Protects control panels and switch boards from flame leakage • Protects motors / transformers / feeders / DG etc   • Complete protection for oil refineries, pulp industries, mining industry, electrical distribution & control engineering

• Mounting Type: DIN rail mount
• No. of Input: 1
• Output Contact: 1C/O (SPDT)
• Supply Voltage: 230V ± 20%
• Size: 35mm (Width)
• Type of Input: 3Ø-3 wire
• Measuring Parameters: Phase asymmetry, Phase failure, Phase sequence

SC14S is a self-powered, single-phase, non-directional, Earth fault relay with one measuring element. Features :- Micro-controller based design Draw out facility Built in Third Harmonic Filter. It helps to avoid spurious tripping in harmonic rich power systems Instantaneous time delay or delay of 100 ms, 200 ms can be set

• Brand Name: Megger
• Power: 120 volt,60 Hz
• Operating Temperature: 32 to 122 Degree F (0 to 50 Degree C)
• Dimensions: 13 H x 14 W x 10 D in. (330 H x 356 W x 254 D mm)
• Weight: 25 lb (11.3 kg)
• Model Number: BGL
• Input: 120 V,60 Hz,30 VA OR 240 V,50 Hz,30 VA
• Battery: Lead-acid rechargeable
• Resistance Range: 1 to 100 k
• Capacitance Range: 1 to 100
• Accuracy: + - 15% to + - 40%
• Injected Signal: 25 Hz nominal,3.5 V rms maximum,110 mA maximum
• Maximum Ripple Current: 0.5 A (ac)
• Storage Temperature: -40 to +149 Degree F (-40 to +65 Degree C)
• Relative Humidity: Up to 80%