Hacksaw Cutting Machine Dealers in Fort, Mumbai

ensuring a parallel cut. This cut takes place on the draw stroke & the hydraulically liften out of contact with the workpiece on the forward stroke to prevent wear or the blade & can out metals of all kinds & strength. FEED : Two levers are provided at the pot one regulators the rate of feed while the other enabled the bow slide to be raised or forwarded hydraulically bow raised automatically & motor Switched off on completion of the cut. BED : The bed is of large proportion provided with guide ways for the vice for clamping the material vice is of rigid constructional. One jaw remains fixed & the other can be adjusted according the material to be cut.   ELECTRICAL EQUIPMENT :A direct on line push bottom starter can be fitted which incorporates & adjustable trip mechanism which stops the machine as soon as the blade is clear from the work non productive time is reduced to minimum. DRIVE : Power is supplied by a suitable electric motor through Vee-Belts which are full adjustable for tension all drive mechanism being totally enclosed. SPEED : The incorporation of two-speed driving mechanism allows for the most suitable speed to selected for material being cut. COOLANT : The Coolant tank is totally enclosed in the machine base & a Speed Pump supplies coolant to the saw blade through a stay put pipe & top.     Machine supplied with suitable electric motor with starter, wiring, mechanical coolant pump, set of V belt and vice - saw blade in extra cost Machine upto cutting are 16" are single hydraulic unit and 18", 20", 24" are having two hydraulic units

• Cutting Capacity (Round): 200
• Length of Stroke: 140
• Blade Size: 400 x 32 x 1.6

Hydraulic movement of cutting arm, The arm lifts out of contact of the work piece in the forward stroke to prevent damage to the blade or work piece, Three speed cutting feed controlled by a lever allows to adjust speed according to the material,Auto lift of cutting arm after job completion.

SAW FRAME : This of regid construction & runs in prismatic guide ensuring a parallel cut. This cut takes place on the draw stroke & the hydraulically liften out of contact with the workpiece on the forward stroke to prevent wear or the blade & can out metals of all kinds & strength.FEED : Two levers are provided at the pot one regulators the rate of feed while the other enabled the bow slide to be raised or forwarded hydraulically bow raised automatically & motor Switched off on completion of the cut.BED : The bed is of large proportion provided with guide ways for the vice for clamping the material vice is of rigid constructional. One jaw remains fixed & the other can be adjusted according the material to be cut. ELECTRICAL EQUIPMENT : A direct on line push bottom starter can be fitted which incorporates & adjustable trip mechanism which stops the machine as soon as the blade is clear from the work non productive time is reduced to minimum. DRIVE : Power is supplied by a suitable electric motor through Vee-Belts which are full adjustable for tension all drive mechanism being totally enclosed.SPEED : The incorporation of two-speed driving mechanism allows for the most suitable speed to selected for material being cut.COOLANT : The Coolant tank is totally enclosed in the machine base & a Speed Pump supplies coolant to the saw blade through a stay put pipe & top.

FULLY HYDRAULIC HACKSAW MACHINE

• Shipping Volume (m3): 0.88,1.14
• Dimensions (m): 1.1 x 0.8 x 1.0,1.1 x 0.8 x 1.3

‘V’ belt drive with two speeds by step pulley, Hydraulic relief to saw blade on non-cutting stroke, Automatic lifting of saw blade after cutting action.Electric Motor, Starter, Mechanical Coolant Pump, Length Gauge, Fixed Vice.