Hanger Bolts Dealers in Girgaon, Mumbai

• Size: Above 2mm
• Material: Metal
• Shape: Round
• Application: Fittings
• Color: Metallic, Silver
• Feature: Corrosion Resistance
• Thread Type: METRIC , BSW, UNC,UNF,

GRADE: AVAILABLE. Carbon Steel: ASTM A105/ A105N/ A694 F42/46/52/56/60/65/70 / A350 LF3/ A350 LF2, etc. Alloy Steel: ASTM A182 F1/ F5/ F9/ F11/ F22/ F91/ etc. Stainless Steel: ASTM A182 F304/ 304L/ 304H/ 316/ 316L/ 317/ 317L/ 321/ 310/ 347/904L/ etc. High tensile : 8.8 , 10.9 , 12.9 Duplex steel : UNS S3180,UNS S32205(2205), UNS S32750(32750) , UNS S32760(ZERON 100) Nickel: UNS N02200, UNS N0220 Inconel : UNS N06600, UNS N06625 , UNS N08800 , UNS N08810, UNS N08811, UNS N08825 Monel: UNS N04400, UNSN05500 Hastelloy : UNS N10276, UNS N06022, UNS N10665 Alloy 20: UNS N08020 Copper Nickel: UNS C70600(90:10), UNS C71500(70:30) Titanium : GR.1 R56250(CP4), GR.2 R50400(CP3), GR.3 50550(CP2), GR.4 50700(CP1), GR R56400(6AI-4V) , GR.7 52400, GR.1 R52250, GR.23 R56401

Hanger bolts at one end and machine screw thread on the other. They are designed for insertion into a pre-drilled hole and are ideal for overhead application, such as suspending electrical wiring or sheet metal from wooden stuctures.We Manufacture & Supply These Hanger bolts in Stainless Steel,Alloy Steel & Carbon Steel Material.

Standard: DIN 931, DIN 933, DIN 603, DIN 912, DIN 601, DIN 961 DIN 571, ASTM A193 B7, DIN 912, DIN 7984Raw Material: Carbon Steel (Class 4.8 - 12.9) Stainless steel 304 316 SS18-8 (A2-50 A2-70 A4-50 A4-70)Product Size: Dia. M10-M52 (3/8"-2"), Length.20mm-3000mm(3/4"-120") Finishing (surface): Plain, Black, Yellow or White or Blueness Zinc (Cr.3 or Cr.6), Black Zinc, Dacromet, Hot Dip Galv, Nickel Plating, Cuprum Hanger bolts are studs used to suspend objects from or attach items to wood. Like a typical stud, they have threads at each end—lag threads to screw into wood but, at the other end, machine threads to accept a nut or thread into an internally threaded (tapped) hole. Coupling nuts and threaded rod are often used with hanger bolts to suspend electrical conduits, junction/pull boxes, fixtures and sheet metal. The furniture industry uses them with corner brackets, clinch nut plates, tee nuts and whenever wood and machine threads are needed in a single fastener. Hanger bolts are also known as: couch bolts, headless hanger bolts, hanger screws. Being headless, a little ingenuity is needed to drive them into wood—see below for a few installation tips. Hanger Bolt, Fully ThreadedThreads are standard right-hand. The machine threads are Unified inch coarse series (UNC, Unified National Coarse) and the lag threaded portion has coarse, widely spaced threads that end in a tapered blunt point designed to start threading into a properly sized pilot hole. Plain center style has an unthreaded body section; fully threaded types, also called closed center, do not have an unthreaded section. Measure length from end to end. Common sizes are 8-32, 10-24, 1/4-20, 5/16-18 and 3/8-16 and lengths range from 3/4" to 6". The number of threads per inch (32, 24, 20, etc.) refers to the machine threaded end. Since hanger bolts are headless, use a driver tool to install. If a tool isn't available, you have several options. Method 1: Double nut—thread two nuts onto the hanger bolt and tighten (jam) them together, then drive the outer hex nut. Although this technique works with all sizes, use double nuts and a socket wrench to drive 1/2-13 hanger bolts, which require much higher torque to install than smaller sizes. Method 2: You can drive small sizes using a cap (acorn) nut. Be sure to use a solid metal nut rather than a hollow Palnut type cap nut. Method 3: On plain center style, use locking pliers. Pliers can also be used on fully threaded hanger bolts but be certain to grip the threads in an area that won't be used because thread damage is likely to occur. Method 4: Make a driver tool by cutting the head off a hex socket head shoulder screw that has, say, a 1" long shoulder, and thread it into a coupling nut. The shoulder of the shoulder screw is then inserted into a drill/driver. (Naturally, the threads of the driver item(s) you choose to use must match the machine threads of the hanger bolt.) Steel is a common material. Plain finish, which lacks a surface treatment to inhibit rust, and zinc plated are the usual finishes. Hanger bolts require predrilled, full-depth pilot holes to ensure maximum withdrawal resistance; hole size is based on bolt size and wood density, as suggested in Table 1.

• Grade: DIN, ASTM, BS and all International Standards
• Size: M3 - M56, 3/6" to 2" , Custom Sizes
• Length: 3 mm to 200 mm, Custom Sizes
• Tolerance: +/-0.01mm to +/-0.05mm
• Packing: canton, pallet, Small Boxs / carton / pallet, or customer request
• Material Grade: Stainless Steel 310 ,316,317,347

• Feature: Easy to use , Flawless finish and High quality

Being one of the noticeable associations, we are included in offering an extensive variety of Hanger Bolt. This Hanger Bolt is a standout amongst the most favored decisions in the business sector because of its one of a kind components. They are decisively outlined and precise in measurements. Interest of our items is high in the business sector in light of their ostensible costs.

Hanger Bolts have threaded areas at both ends, a lag screw thread at one end and machine screw thread on the other. They are designed for insertion into a pre-drilled hole and are ideal for overhead application, such as suspending electrical wiring or sheet metal from wooden stuctures.We Manufacture & Supply These Hanger bolts in Stainless Steel,Alloy Steel & Carbon Steel Material.  

Hanger Bolts, Plain Washers, Industrial Angles, Bolts & Screws

Hanger Bolts, shoulder bolt, Castle Nut, Metric hex bolt, Brass Hex Bolts